Expert Service 1-877-289-7664 [Hours]

Shipping Promo

Rockford Fosgate P2-2X10 (11P2-2X10)

1200 Peak Punch P2 Dual 10" P2D4-10 Subwoofer Loaded Enclosure

In Stock
|

List price $499.99

You Save: $240.99 (48.20%)

$259.00

with warranty

+ FREE Shipping in US 48

Order within 6 hrs 48 mins to ship today

Arrives by Tuesday, Dec. 23 to zip 07095

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Tue, Dec. 23

Get FAST answers from customers ASK a Question See questions answers

Punch: Stage2

The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. Punch Loaded enclosures are constructed with durable 5/8" MDF and tuned by Rockford Fosgate's computer aided design software. P2 Loaded Enclosures feature similar tonal performance as P1 models, but with more power handling capacity.

Rockford Fosgate has always been known as "The PUNCH" and the P2 10" subwoofer certainly continues with the tradition. Kevlar fiber reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%.

Product Features
  • Two 10" Dual 4 Ohm Punch Series Stage 2 Subwoofers
  • Power Handling:
    • Peak: 1200 watts total / 600 watts each
    • RMS: 600 watts total / 300 watts each
  • Enclosure impedance: 1 ohm (Wired internally in parallel/parallel to final 1 ohm impedance)
  • High modulus Kevlar reinforced paper cone and dust cap provides durability
  • High density NBR half-roll surround for enhanced excursion
  • Custom insulated/isolated 10 AWG nickel plated compression input push terminal assembly will keep connection secure and resist corrosion
  • Tear and fatigue resistant poly-cotton spider will hold up against high amounts of excursion
  • High temperature 2" 4-layer voice coil with spun laced Nomex insulating reinforcement collar
  • Optimized motor magnetics with extended pole piece and bumped backplate
  • Fatigue resistant and reduced strain stitched on flexible lead wire design
  • Multi point high-temperature/high-strength neck joint bonding technique for a cleaner bass output
  • High quality 16 gauge compound bend frame geometry adds to the sturdy construction
  • Semi flexible PVC removable protective motor cover helps keep motor clean and dust free
  • Proprietary spider venting/cooling technique helps keep subwoofer operating at a safe temperature
  • Decorative ABS trim ring for attractive appearance
  • Frequency Response: 30.8-250 Hz
  • Sensitivity: 84 dB
  • Xmax: 10mm
  • 1-year SonicElectronix.com warranty
Enclosure Features:
  • Dual 10" Loaded, Ported Box
  • Solid 5/8" MDF Construction
  • Front-firing tuned port
  • Spring-loaded binding posts
  • Complete with high-density black box carpeting
  • Dimensions: 15-1/8"D x 31-1/8"W x 13-1/8"H

Product History:

Rockford Fosgate P2-2X10 thumbnail
(newest, current model)
Rockford Fosgate P2L-2X12 thumbnail
(previous model, replaced by Rockford Fosgate P2-2X10 (11P2-2X10))

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
300 watts
Total RMS Power Handling
This is the total RMS power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
600 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
600 watts
Total Peak Power Handling
This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
1200 watts
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Kevlar Reinforced Pulp (Paper)
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
84 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
30.8 - 250 Hz
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
10 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Vented / Ported
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
2
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Square/Rectangle
Height
The height of the item, measured from top to bottom, in inches.
13-1/8"
Width
The width of the item from left to right (side-to-side) measured in inches.
31-1/8"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
15-1/8"
Wood Thickness
The thickness of the wood the enclosure is made of, measured in inches.
5/8"
Terminal Type
Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

Spring posts (banana clip ready)
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Black
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
4.7
Design
5.0
Usability
5.0
TSR

Henderson, CO

Overall
Durability
Value
Features
Design
Usability
Rockford Fosgate P2-2X10

September 17, 2013

I own and recommend this product. It has incredible sound quality, effeceincy & durability. I have owned pro audio PA systems so I know what good bass should sound like and whether something's a good value. This loaded box is an extremely good value. I'm only feeding 300 watts mono but it moves my Ford Excursion.

note: The speaker cones are great for a vehicles b/c they won't get ruined if they get wet too (kids, soda's, car wash, etc).

0 of 0 found this helpful

Help our customers find the most helpful reviews

Cmac

Columbus, Ohio

Overall
Durability
Value
Features
Design
Usability
Good boom for the buck

September 6, 2012

The Rockford Fosgate box and woofers hit hard at max power. I have it in my trunk with the center port firing through the ski boot opening in the back seat and the bass is impressive, very clean and tight. I feel like I couldn't have done better for the price with the amp that I already had which puts out 600 watts of clean RMS mono power at 4 ohms.
It can handle every bit of the power the amp can give it, probably more. The box looks great and is well constructed, the connectors work great, and the center port really moves some air. The dual voice coils provide a good variety of configuration options. I've been running it hard for 6 months with no problems.

0 of 0 found this helpful

Help our customers find the most helpful reviews

RLucero

Santa Fe, NM

Overall
Durability
Value
Features
Design
Usability
LOUD LOUD LOUD

April 3, 2012

This box is so loud and forceful! I'm running 600 watts to it from a diamond audio d600.1, and it literally will take my breath away on certain bass lines.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

Your Price $39.99

NVX Sound Dampening Rubber Roller (SDRLR1)

Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More

Your Price $14.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

P2-2X10

UPC

780687332945

Weight

70.20lbs

Internal SKU

p22x10

Internal Product ID

34872

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Rockford Fosgate P2-2X10 (11P2-2X10)