Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale!

Rockford Fosgate P2-2X12 (11P2-2X12)

1600W Peak Punch P2 Dual 12" P2D4-12 Subwoofer Loaded Enclosure

In Stock
|

List price $529.99

$269.95

with warranty

You Save: $260.04 (49.07%)

Arrives by Tuesday, Aug. 5 to zip 98109

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Tue, Aug. 5

Bundled Savings with this Product

=

Frequently Bought Together

Save 10% on an NVX trunk kit that contains 20 sq. ft. of quality sound dampening material. This material quiets vibrations, stops rattles, and increases the subwoofer SPL.

6.00

34873

507

Rockford Fosgate P2-2X12 (11P2-2X12)

$269.95

+

10% OFF

NVX SDTK20

$59.99

Special Price $53.99 ($59.99 if purchased separately)

NVX SDTK20

• Eliminates Road Noise
• Quiets Vibrations
• Stops Rattles • Increases SPL
• Reduces Heat
• Simple To Install
• Easy To Form Aluminum
• Four Step Peel and Stick Installation
• Five 18" x 32" Pieces

(Offer 1 of 1)

Combined Total Price

$323.94

You Save $6.00

Punch: Stage2

The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. Punch Loaded enclosures are constructed with durable 5/8" MDF and tuned by Rockford Fosgate's computer aided design software. P2 Loaded Enclosures feature similar tonal performance as P1 models, but with more power handling capacity.

Rockford Fosgate has always been known as "The PUNCH" and the P2 12" subwoofer certainly continues with the tradition. Kevlar fiber reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%.

Product Features
  • Two 12" Dual 4 Ohm Punch Series Stage 2 Subwoofers
  • Power Handling:
    • Peak: 1600 watts total / 800 watts each
    • RMS: 800 watts total / 400 watts each
  • Enclosure impedance: 1 ohm (Wired internally in parallel/parallel to final 1 ohm impedance)
  • High modulus Kevlar reinforced paper cone and dust cap provides durability
  • High density NBR half-roll surround for enhanced excursion
  • Custom insulated/isolated 10 AWG nickel plated compression input push terminal assembly will keep connection secure and resist corrosion
  • Tear and fatigue resistant poly-cotton spider will hold up against high amounts of excursion
  • High temperature 2" 4-layer voice coil with spun laced Nomex insulating reinforcement collar
  • Optimized motor magnetics with extended pole piece and bumped backplate
  • Fatigue resistant and reduced strain stitched on flexible lead wire design
  • Multi point high-temperature/high-strength neck joint bonding technique for a cleaner bass output
  • High quality 16 gauge compound bend frame geometry adds to the sturdy construction
  • Semi flexible PVC removable protective motor cover helps keep motor clean and dust free
  • Proprietary spider venting/cooling technique helps keep subwoofer operating at a safe temperature
  • Decorative ABS trim ring for attractive appearance
  • Frequency Response: 27.2-250 Hz
  • Sensitivity: 86 dB
  • Xmax: 10mm
  • 1-year SonicElectronix.com warranty
Enclosure Features:
  • Dual 12" Loaded, Ported Box
  • Solid 5/8" MDF Construction
  • Front-firing tuned port
  • Spring-loaded binding posts
  • Complete with high-density black box carpeting
  • Dimensions: 15-3/4"D x 33-7/8"W x 15-1/8"H

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
400 watts
Total RMS Power Handling
This is the total RMS power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
800 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
800 watts
Total Peak Power Handling
This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
1600 watts
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Kevlar Reinforced Pulp (Paper)
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
86 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
27.2 - 250 Hz
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
10 mm

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Vented / Ported
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
2
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Square/Rectangle
Height
The height of the item, measured from top to bottom, in inches.
15-1/8"
Width
The width of the item from left to right (side-to-side) measured in inches.
33-7/8"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
15-3/4"
Wood Thickness
The thickness of the wood the enclosure is made of, measured in inches.
5/8"
Terminal Type
Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

Spring posts (banana clip ready)
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Black
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
73%
4 Star
27%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.8
Value
4.8
Features
4.6
Design
4.8
Usability
4.7

Miles

tampa, FL

Overall
Durability
Value
Features
Design
Usability

Amazing Setup! Real TOP LINE quality(:

June 13, 2014

I was researching these subwoofers everyday trying to make sure they were worth it...BOTTOM LINE...Should of got them sooner cause their Amazing! Have them under powered and they WHAMMM... If your one of those guys like me where your constantly checking around for a bad review...THERE IS NONE....BUY NOW(:

0 of 0 found this helpful

Help our customers find the most helpful reviews

Iron Monk

Canada

Overall
Durability
Value
Features
Design
Usability

WOW

January 6, 2014

These subs pound and sound incredible in the Rockford tuned box. I am extremely satisfied with this product.

0 of 0 found this helpful

Help our customers find the most helpful reviews

gdrakec22

Liberty, NC

Overall
Durability
Value
Features
Design
Usability

Can`t beat the value and the price

September 17, 2013

I bought this loaded subwoofer box for my brother. I could`nt believe how deep it was. I`m thinking about getting one for my daughter.

0 of 0 found this helpful

Help our customers find the most helpful reviews

darell

Illinois

Overall
Durability
Value
Features
Design
Usability

good product

September 17, 2013

I love the sound of these subs in the box I was surprised they bang real Hard for the price you can not beat I would recommend these subs too anybody they are good.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Heavy Metal

Denver Colorado

Overall
Durability
Value
Features
Design
Usability

Excellent product!

September 17, 2013

This sub hits hard and will take the full 1000 watt rating all day long. If you are looking for quality at an excellent Sonic Electronix price, put this in your cart today! I use it for Heavy Metal, (I don't care for rap or pop) put on Drowning Pool, Tear Away and feel the power.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Jon

Virginia Beach,Virginia

Overall
Durability
Value
Features
Design
Usability

Best Subs Great Value

April 11, 2013

Just switched from powerbass subs to the Rockford Fosgate p2's had to re-wire them to 4ohms other than that the sound is amazing. The lows arent the strongest but the highs are amazing. 100% upgrade though love these subs and for the price you can not beat it. I highly recommend ordering a pair of these.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Derek

Glenwood, IA

Overall
Durability
Value
Features
Design
Usability

Almost 1 year

March 21, 2013

My 2nd review on this product. in the first one i went on and talked about the amazing build quality and craftsmanship of the box and woofers, and looks that match. in this one, ill tell you how its stood the test of time! almost one full year of beating the bass hard, thrashing these woofers to the limits. NEVER any voicecoil smell, they never siezed up, or blew. i would go back and buy these all over again if i had the chance.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Devin

Grand Rapids, MI

Overall
Durability
Value
Features
Design
Usability

great product

October 22, 2012

Owned this before they got stolen. Best Subs ive owned. Had a hifonics 1000 watt mono amp and my system pounded easily loudest and best sounding at my school. Rockford Fosgate products are fantastic i would recommended these to any bass lovers.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Derek

Glenwood, IA

Overall
Durability
Value
Features
Design
Usability

Exceeds Expectations!

October 1, 2012

This Enclosure seriously exceeds my expectations. first hand PROPS to Sonic for making it so easily affordable. secondly rockford fosgate seriously out did themselves by designing this enclosure. I am a serious rockford fosgate fan, and have always used their products so i know what to expect out of them. I am using a Rockford Fosgate T500-1bdCP model amplifier pushing 814 "true power" watts at 1 Ohm. Using this amp allows to P2 2x12 to be taken to its full potential and let me tell you first hand it Rattles my brain, my windows, and I see people turning their heads from a block away! No damage done while in shipping, quick and easy ordering online.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Marcus

Salisbury

Overall
Durability
Value
Features
Design
Usability

RF p2

September 23, 2012

I had bought these subs back in march and since then I have had no problems with them. With the right amp, these subs witll greatly exceed your expectations.

0 of 0 found this helpful

Help our customers find the most helpful reviews

db

Columbus, OH

Overall
Durability
Value
Features
Design
Usability

Good

September 4, 2012

This is a very good product by RF. They hit pretty hard & are loud. They do pretty good with note changes & hit some ok lows. Not the REALLY deep ones but still pretty good. I have a MTX 1000.D1 pushing them very good. Yes the rumor about the smell is true. You can definitly smell the voice coils after about 10 or 15 minutes of LOUD play. But as of yet i havent had 1 blow out. Going 3 months strong. They dont sound to good when u really crank them up loud. Kinda gets sloppy. But at a moderate loudness they bump hard. I would recommend this product...

0 of 0 found this helpful

Help our customers find the most helpful reviews

Nitro

Angier, NC

Overall
Durability
Value
Features
Design
Usability

Good product

July 10, 2012

I have had the RF speakers installed for about 6 months now and I am still thrilled with them. Good product at a good price. Sonic provided fast delivery and I am entirely pleased with the transaction.

0 of 0 found this helpful

Help our customers find the most helpful reviews

stp

houma,la.

Overall
Durability
Value
Features
Design
Usability

good combo

November 28, 2011

I recommend this combo to anyone. Looks good, sounds good. I have a massive audio n2 pushin them.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Gabriel

Delano, CA

Overall
Durability
Value
Features
Design
Usability

THE BEST SPEAKERS I EVER BOUGHT!

September 10, 2011

They hit hard with the right amp i recommend these speakers!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Jonah

Espanola, NM

Overall
Durability
Value
Features
Design
Usability

It sets off car alarms!

May 26, 2011

I have a 2000 Ford Ranger with these hooked up to a HF 2500W 825 RMS @4 Ohms Mono D with 4 gauge wire running them at 4 ohms.(Note. These are internally wired at 2 ohms you will need a lil extra speaker wire a butt connector and some skill to do the job if you want a 4 ohm setup) these subs are earth shattering and they look so nice in this box with everything black. These things blow girls hair around when your cruzin around! definitive worth the money to spend a ton on Rockford products!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

Your Price $39.99

NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

Your Price $59.99

NVX Sound Dampening Rubber Roller (SDRLR1)

Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More

Your Price $12.99

Product Summary

Manufacturer

Model Number

P2-2X12

UPC

780687332969

Weight

79.00lbs

Internal SKU

p22x12

Internal Product ID

34873

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Rockford Fosgate P2-2X12 (11P2-2X12)