Infinity and Kicker Bass Bundle
This Sonic Electronix Exclusive Bass package showcases a Kicker 11DX500.1 Amplifier along with a pair of 10" Reference Series Subwoofers. This excellent bass package pushes 550 watts of clean, continuous RMS power. The Infinity Subwoofers each have Single 4 Ohm Voice Coils; meant to be wired in parallel, to a final impedance of 2 Ohms. For more information regarding subwoofer wiring, please check out our Subwoofer Wiring Diagram.
These Infinity 1060W Reference Series subwoofers require 550 watts of RMS power. The included Kicker 11DX500.1 amplifier will compliment this required power by supplying a perfect match-up of certified RMS continuous power. This package also includes a 4 gauge amplifier kit which is perfect to supply power to the amplifier. With the Infinity subwoofers, Kicker amplifier, and The Install Bay amplifier kit, this bass bundle is great for anyone looking to upgrade their vehicle's audio system
Infinity Reference 1060W Features:
- Pair of 10" Single 4 Ohm Reference Series Subwoofers
- Power Handling:
- Peak: 2200 watts total / 1100 watts each
- RMS: 550 watts total / 275 watts each
- Impedance: 4 Ohms
- High-gloss polypropylene woofer cone ensures maximum woofer efficiency
- Large-roll rubber surround absorbs distortions
- Vented pole pieces provide additional cooling of the motor
- 2" Voice coil
- Frequency response: 25-400 Hz
- Sensitivity: 91 dB
- Mounting Depth: 5-7/8"
- Cutout Diameter: 9-1/4"
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
Kicker 11DX500.1 Features:
- DX Series Monoblock Class D Car Amplifier
- RMS Power Rating (14.4V):
- 4 ohms: 275 watts x 1 chan.
- 2 ohms: 500 watts x 1 chan.
- Max power output: 1000 watts x 1 chan.
- High efficiency MOSFET power supply
- Wired Kicker 10ZXRC remote bass level control included
- LED power and protect indicators
- Variable Bass Boost (0 to +12 dB bass boost at 40 Hz)
- Mono channel operation
- Preamp RCA outputs
- FIT (Fail-Safe Integration Technology) utilizes differential inputs to reject noise and electrical interference for the quietest operation possible and ultimate audio clarity
- Muting circuit cancels out unwanted noise
- Balanced differential inputs for noise elimination and factory-radio compatibility
- Dual input sensitivity differential RCA inputs which receive high or low level signals
- Speaker-level input compatible (switchable) through RCA connection, Kicker 09ZISL required and sold separately
- 3 Automatic turn-on modes (remote, DC offset, signal sense)
- High-density convection heat sink for extreme heat dissipation
- Gold-plated RCA level inputs
- Gold-plated screw terminals
- Input sensitivity:
- Low level: 125mV-5V
- High level: 250mV-10V
- Variable low-pass filter (50-200 Hz, 18 dB/octave)
- Variable high pass subsonic filter (10-30 Hz, 18 dB/octave)
- CEA-2006 compliant amplifier
- Frequency response: 20-200 Hz
- Dimensions: 10-1/4"L x 8-5/16"W x 2-1/4"H
- Actual power exceeds rated power, documented inside each carton
- 4-gauge power and ground wiring is required for installation.
- Authorized Internet Dealer
- 2-year Manufacturer's warranty
The Install Bay AK4 Features:
- Complete 4 Gauge Amplifier Installation Kit with RCA Interconnect Cables
- Perfect for 1600 watts amplifier setup
- Includes everything that you need to install a single amplifier
- Premium power and ground cable
- 1-year Manufacturer's warranty
The Install Bay AK4 Includes:
- 17 ft. of Blue power cable
- 3 ft. of Black ground cable
- 17 ft. of Clear/blue RCA cable
- 25 ft. of Speaker wire
- 17 ft. of Remote turn-on wire
- In-line AGU fuse holder
- 60 Amp AGU fuse
- Installation hardware
GS Audio BG-10 Features
- Universal 10" Subwoofer Grille
- Grill fits most round 10" Subwoofers
- Keep your subwoofer safe from accidental damages with this amazing grille
- Sleek aluminum finish
- 11-3/8" Mounting hole distance
- 11-5/8" Wide on the inner section
- 12-1/2" Wide on the outer section
- 1-5/8" Space between bars
- May require the removal of beauty rings to assure fitment
Customer Service
