Rockford Fosgate P3D2-15 (11P3D215)

Taking Punch to a Higher Stage

Sonic Electronix is now carrying the brand new 2011 line of Rockford Fosgate Punch P3 Series Car Audio Subwoofers. The P3D2-15 Punch Series 15" Subwoofer has a peak power rating of 1200 watts and a RMS rating of 600 watts. This sub will produce some earth shaking bass and is constructed with an anodized aluminum cone and a vertical attach surround technique. This woofer is also equipped with a 2-1/2" Voice coil and a protective PVC textured magnet cover. Add some bumps in your trunk and enhance your cars stereo system with this Rockford Fosgate Punch Series Subwoofer.

Anodized Aluminum Voice Coil Former

By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

Conforms to CEA-2031

Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.

Stitched Tinsel Leads

To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.

VAST: Vertical Attach Surround Technique

In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.

• 15" Punch P3 Series Dual 2 Ohm Subwoofer
• Power Handling:
  • Peak: 1200 watts
  • RMS: 600 watts
• Impedance: 2 ohm
• Anodized aluminum heat sinking cone & dustcap for strength and durability
• Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area
• Dual tear & fatigue resistant linear poly cotton spiders
• Optimized motor magnetics with extended pole and bumped backplate
• Fatigue resistant and reduced strain stitched tinsel leads
• Multi point high temp/strength neck joint bonding technique
• Sturdy 16 gauge compound bend frame geometry
• Semi-Flexible PVC removable protective motor cover
• Custom insulated compression input terminal assembly
• Proprietary spider venting/cooling technique
• Decorative die cast trim ring
• Custom 10-AWG nickel plated push terminals
• High temperature 4-layer 2-1/2" voice coil with spun laced nomex insulating reinforcement collar
• 102 oz Double stacked ferrite magnet structure
• Frequency response: 21.7-250 Hz
• Sensitivity: 86 dB
• Xmax: 13.3 mm
• Mounting Depth: 7-5/8"
• Cutout Diameter: 14"
• 1-year Sonic Electronix warranty

Product History:

	Rockford Fosgate P3D2-15 (11P3D215) (newest, current model)
	Rockford Fosgate Punch P3D215 (09P3D215) (previous model, replaced by Rockford Fosgate P3D2-15 (11P3D215))
	Rockford Fosgate Punch P315D2 (previous model, replaced by Rockford Fosgate Punch P3D215 (09P3D215))