Expert Service 1-877-289-7664 [Hours]

Shipping Promo

Rockford Fosgate P1S4-10 (11P1S410)

250W 10" Punch Stage 1 Single 4 ohm Subwoofer

Out of Stock - Backorder
|

List price $119.99

You Save: $57.53 (47.95%)

$62.46

with warranty

+ FREE Shipping in US 48

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Get FAST answers from customers ASK a Question See questions answers

Feel the Difference with 1 Punch

Sonic Electronix has the brand new 2011 model of the Rockford Fosgate P1S4-10 Punch Stage 1 Subwoofer. This woofer has a peak power rating of 500 watts and an RMS rating of 250 watts. Just like all Rockford Fosgate products, this subwoofer is built with quality and durability. The P1S4-10 features a high modulus kevlar reinforced paper cone with a high density NBR half-roll surround. The 10 AWG nickel plated push terminals with keep a secure connection at all times while resisting corrosion. The Punch Series 8" woofer also comes equipped with 2" 4-layer high temp voice coil, poly cotton spider, extended pole piece, bumped backplate, and a proprietary spider venting/cooling technique that helps keep subwoofer operating at a safe temperature. Once again, Rockford has made a top notch product at an affordable price.

 
Anodized Aluminum Voice Coil Former

Anodized Aluminum Voice Coil Former

By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.

 
CEA-2031 Rockford Fosgate Subwoofers

Conforms to CEA-2031

Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.

 
Rockford Fosgate Stitched Tinsel Leads

Stitched Tinsel Leads

To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.

 
Product Features
  • 10" Single 4 Ohm Punch Series Stage 1 Subwoofer
  • Power Handling:
    • Peak: 500 watts
    • RMS: 250 watts
  • Impedance: Single 4 ohm
  • High modulus Kevlar reinforced paper cone and dust cap provides durability
  • High density NBR half-roll surround for enhanced excursion
  • Custom insulated/isolated 10 AWG nickel plated compression input push terminal assembly will keep connection secure and resist corrosion
  • Tear and fatigue resistant poly-cotton spider will hold up against high amounts of excursion
  • High temperature 2" 4-layer voice coil with spun laced Nomex insulating reinforcement collar
  • Optimized motor magneteics with extended pole piece and bumped backplate
  • Fatigue resistant and reduced strain stitched on flexible lead wire design
  • Multi point high-temperature/high-strength neck joint bonding technique for a cleaner bass output
  • High quality 16 gauge compound bend frame geometry adds to the sturdy construction
  • Semi flexible PVC removable protective motor cover helps keep motor clean and dust free
  • Proprietary spider venting/cooling technique helps keep subwoofer operating at a safe temperature
  • Decorative ABS trim ring for attractive appearance
  • Frequency Response: 30-250 Hz
  • Sensitivity: 85 dB
  • Xmax: 7.0mm
  • Cutout dimensions: 9-1/8"
  • Mounting Depth: 5-3/8"
  • 1-year SonicElectronix.com warranty

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Punch P1 (Rockford Fosgate)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
500 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
250 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
2"
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
30 - 250 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
85 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
7.0 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Black
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Kevlar Reinforced Pulp (Paper)
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
NBR Half Roll
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.50 cubic feet
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.85 cubic feet
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.40 cubic feet
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.40 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
5-3/8"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
9-/18"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
30.00 Hz
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
40.00 liters
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
0.51
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 10.
0.61
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
3.60 ohms
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 10.
3.00
Efficiency Bandwidth Product (EBP)
This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
56%
4 Star
22%
3 Star
22%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.4
Value
4.6
Features
3.6
Design
4.1
Usability
4.3
Scott V

Killeen, TX

Overall
Durability
Value
Features
Design
Usability
Good Bang for the Buck

October 22, 2014

I installed these under the seat in a Dodge Ram ran off a Punch 300x1 MOno amp. Awesome results. It was a job I did for my neighbor and he is super happy with it and I can hear him coming down the road. Clean low end in the car. Definitely good for novices but not an audiophile speaker. If you want that get Image Dynamics :)

0 of 0 found this helpful

Help our customers find the most helpful reviews

67 Firebird

Decatur, TX

Overall
Durability
Value
Features
Design
Usability
Superior Sub

October 6, 2014

I was looking for a single 10 inch sub to give a little bass to my 67 Firebird. The exhaust on the car is loud so I really need a sub that could handle quite a bit of power. I am powering this sub off of a 900W Kenwood 4 channel amp.(the amp also powers 2 6X9s) I mounted the sub in an enclosed box that lives in the trunk. I did not want bass that would rattle the glass out...just wanted to feel the music over the rumble of the car. This sub sounds crisp and clean and hits hard. I mostly listen to rock, blues and country but my kids will throw in some occasional hip hop and the sub sounds great with all. I plan to buy one more for my daily driver.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Kyle

Mount Laurel, NJ

Overall
Durability
Value
Features
Design
Usability
Thump!

February 18, 2013

I purchased 3 of these subs to put in my car. In a sealed box these have good sound quality even with the right amp they thumped but did not Bang and that is what I wanted. This product is good for the price but you get what you pay for I guess. If your looking for precision sound to add to your music listening experience then these are perfect subs, but if you are looking for a sub that hits hard and is pretty powerful then I'd tell you to get another sub but everyone is different. I'd recommend as someones First Sub maybe second depending on what type of Bass you look for.

0 of 0 found this helpful

Help our customers find the most helpful reviews

max

Canada

Overall
Durability
Value
Features
Design
Usability
awesome sub

November 20, 2012

Great sub for the price!
I have two 10p1s4s in my legacy wagon and makes even other cars rattle. I'm quite impressed with the subs and they don't pull much power since my lights don't dim. Even with hard bass.

The only down is it doesn't really the low, lows like other subs.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Andy

Junction City, KS

Overall
Durability
Value
Features
Design
Usability
Still a Rockin!

September 13, 2012

I bought this Fosgate system about 6 months ago, and it has really good sound & for it's size..

0 of 0 found this helpful

Help our customers find the most helpful reviews

Andrew

APO, AE

Overall
Durability
Value
Features
Design
Usability
Meh good sound for the price.

June 19, 2012

So I ordered a set 2 10" because they were a really good price for two. Im running a p5002 Rockford amp. They are in a vented box and they sound decent. They just don't seem to hit the notes i wanted to hear like my last set i had (same series just the 2010 model.) or it could be my box is not sealed the best. but what can i say they do deliver nice clean thumps. they distort a bit when they are on the heavy bass notes. I am happy till i upgrade to the type-r setup! You guys also have great customer service.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Jay

McNeil, AR

Overall
Durability
Value
Features
Design
Usability
Great speakers

May 15, 2012

Great speakers forward great price. I would recommend these to anybody. Great sound, bass, and quality. I don't have anything bad to say.

0 of 0 found this helpful

Help our customers find the most helpful reviews

josh

tiffinTiffin, OH

Overall
Durability
Value
Features
Design
Usability
nice

January 21, 2012

This sub is powered by a dual 150 watt amp. It's a great combo. Tight accurate bass in my sealed enclosure.

0 of 0 found this helpful

Help our customers find the most helpful reviews

michael

austin, tx

Overall
Durability
Value
Features
Design
Usability
Satisfied

November 15, 2011

This sub is powered by AMP TYPE Rockford Fosgate T-600-4. Had to go with this little bad boy because I have a shallow box under my back seat (Chevy Truck). It bumps hard and clear. If you want a nice tight sounding sub this is for you. If you want to kill your innards with shock waves get two. I am more than happy with this sub. It fits my application nicely.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $44.95

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $109.95

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $69.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $6.99

40" x 15 Ft Piece of Premium Un-Backed Automotive Trim Carpet

Durable design for long life-span, available in many colors and shades.

Your Price $39.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $14.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $79.99

4 Ft of 1/4" Thick Black Heat Shrink Tubing

Provides abrasion resistance and added protection for your cables.

Your Price $3.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $8.99

Rockford Fosgate P1G-10

10" Subwoofer Grille for RF Punch 1 Series

Your Price $15.99

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $13.99

10" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $4.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

Your Price $299.99

1 Rockford Fosgate P1S4-10 (11P1S410) Subwoofer

Mono Amp

2 Channel Amp - Bridged

2 Rockford Fosgate P1S4-10 (11P1S410) Subwoofers

Mono Amp

2 Channel Amp

4 Channel Amp - Bridged

3 Rockford Fosgate P1S4-10 (11P1S410) Subwoofers

4 Channel Amp

4 Rockford Fosgate P1S4-10 (11P1S410) Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Browse 2 questions and 4 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
Needed a new sub for my truck i bought a month ago. I like to thump! Rockford Fosgate is the way to go.
Braden H on Nov 3, 2014
what are better subwoofers the p1s or the r2s?
A shopper on Dec 11, 2014
Best Answer: If your just looking for a little bass added to improve the staging in your car, you won't have a problem with the r2. But if you're lookingp for a bigger boom and more bass the p1 won't let you down for the price. I've used it paired with a rf p300x1 and the bass could be felt several cars away in traffic.
Reply · Report · Christopher J on Dec 12, 2014
· Add Answer · I Have This Question Too (1)

Product Summary

Manufacturer

Model Number

P1S4-10

UPC

780687332594

Weight

10.50lbs

Internal SKU

p1s410

Internal Product ID

36293

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Rockford Fosgate P1S4-10 (11P1S410)