Expert Service 1-877-289-7664 [Hours]

End of Year Clearance Dot Sale

Infinity Kappa 680.9cs with NVX Sound Dampening

6" x 8" 2-way Kappa Series Component System (KAPPA680.9CS) Includes NVX Sound Dampening!

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Infinity Plus Sound Dampening Material Bundle

This Infinity Kappa 680.9cs is the essence and trademark of Infinity car audio. With all the high-end engineering and technology that goes into each Kappa speaker, you will sure that you are receiving only the highest quality components. Made with a woven glass fiber woofer cone, which contributes to low cone flex, low distortion, and enhanced acoustic clarity. Due to the increased power handling of the Kappa series, the Kappa 680.9cs feature edge-driven MMD dome tweeters that allow for a seamless sonic integration between the tweeter and the mid-woofer. Using the latest in loudspeaker engineering, each of the crossovers has computer optimized voice-matched outboard passive crossovers for flawless performance.

The Infinity 680.9cs features a patented Unipivot tweeter design that ensures proper imaging when the speakers are installed. With the tweeter capable of being moved, it is positional and rotational even after the final screw secures the speaker in the door. Since most speakers are installed low in the door, the Unipivot design brings the soundstage up to the listener for more accurate and enjoyable experience. Each of the Kappa coaxial speakers, such as the Infinity Kappa 680.9cs feature adjustable tweeter level control. This switch will adjust the tweeters output by 3 dB. That simple tuning can make all the difference in your system and it ensures that your Kappa speakers will deliver exactly the sound that you are looking for.

The engineers at Infinity have developed a speaker that works for all applications. The True Four Ohm Technology used in these speakers make it perfect for running directly of a headunit or with an aftermarket headunit and amplifier. All of the speakers in the Infinity Reference line feature a 2 ohm voice coil. However, when you factor in the small OEM speaker wire of most vehicles and the heating in the voice coil during use, the impedance actually seen by the amplifier will increase. Infinity has adjusted the speaker to be safely connected to any headunit.

Infinity Kappa 680.9cs

6" x 8" 2-way Kappa Series Component System (also mounts in most 5" x 7" location, KAPPA680.9CS)
Quantity: 1

Speaker Features:
  • 6" x 8" (5" x 7") Kappa Series 2-way Component Speakers System
  • Power Handling:
    • Peak: 540 watts per set / 270 watts each side
    • RMS: 180 watts per set / 90 watts each side
  • Woven glass fiber cone woofer
  • Rubber surround
  • Edge driven UHF dome tweeter
  • Unipivot patented rotating tweeter allows tweeter to be directed at the listener's location
  • Direct connect computer-optimized, voice-matched outboard passive crossover for superb detail and accuracy
  • Tweeter level adjustment on passive crossover to add or subtract 3 dB output
  • 2 ohms impedance
  • Top-mount depth: 2-1/2"
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks

NVX SDSK2

Speaker Kit - 2 Square Feet of Sound Dampening Material (Two 10" x 10" Pieces)
Quantity: 1

NVX SDSK2:
  • Two 10" x 10" Pieces of Series 3 Sound Dampening Material
  • Eliminates road noise
  • Dampens panel vibrations
  • Stops rattles
  • Increases loudness of your audio system
  • Reduces heat in the car
  • Easy to form aluminum conforms to desired area of vehicle with ease
  • Simple peel and stick design for easy installation
  • Increases sound quality and output of car audio system
  • Up to 30% thicker than the leading competitors
  • 1.38 Square feet total
  • Dimensions (each piece): 10"L x 10"W
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
Amount
1.38 ft.2
1.7 ft.2
1.38 ft.2
1.38 ft.2
1.38 ft.2
Application
Speaker
Speaker
Speaker
Speaker
Speaker
Thickness
1.7 mm
2.0 mm
2.3 mm
2.1 mm
2.2 mm

Speaker Specifications

Series
This is the manufacturer product line of speakers.
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6" x 8" (also mounts in most 5" x 7" locations)
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way Component System
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

UHF
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Woven Glass Fiber
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
270 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
90 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
93 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
40 - 25000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
2 ohms
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-1/2"
Bottom-Mount Depth
The depth when installed from the bottom of the mounting surface. Measured from the bottom of the speaker's magnet to the top of the mounting holes on the rim of the speaker.
2-7/8"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches, required to contain the speaker.
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
7-1/8\" x 4-5/8\" 

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $44.95

12-10 AWG Yellow T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $6.99

NVX SDDK12 Door Kit

Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!

Your Price $49.99

Dynamat Xtreme Door Kit 10435

Enough sound dampening to cover most doors!

Your Price $69.95

Stinger Roadkill Door Kit

Use this to eliminate rattle from your doors!

Your Price $46.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $14.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Xscorpion WDCR2 Window and Door Clip Remover

Removes and installs handle and window crank clips.

Your Price $6.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

680.9cs_SDVK4

Weight

13.23lbs

Internal SKU

6809cs_sdvk4

Internal Product ID

36638

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Infinity Kappa 680.9cs with NVX Sound Dampening

  • Harman International: The Pursuit of Great Sound
  • Sonic Electronix: The X Factor when Shopping Electronics