Expert Service 1-877-289-7664 [Hours]

14th Anniversary Sale--More Products Added

1600W Kicker 10DCVR104 + Sound Dampening Material Bass Bundle

Dual 10" Kicker 10DCVR104 CompVR Subwoofer Loaded Enclosure + NVX Sound Damp Material

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Kicker plus Sound Dampening Material Bass Bundle

This Sonic Electronix Exclusive Bundle showcases Dual 10" CompVR Series Subwoofers in a Loaded Subwoofer Enclosure. This enclosure is rated at 800 watts RMS of continuous power and 1600 watts of Max power. The subwoofers are equipped with an Injection Molded SoloKon Cone and Ribbed Santoprene surround for rigidity and optimal performance. The enclosure is made with high quality Fiberboard with a heavy duty black carpeting. The enclosure also features a vented design that will give you some real kicking bass. This loaded enclosure is the perfect solution for those looking for deep bass in a convenient package. In order to improve the all around sound of your audio car system, this bundle also includes ten 18" x 32" pieces of Dead Shield sound dampening material. This dampening material will help reduce engine noise, vibrations, road noise and rattling to give you a higher sound quality. Four step peel and stick application makes installation simple and efficient. This sound dampening material is sure to improve the over all quality and output of your system.

Kicker 10DCVR104 Features:

  • Dual 10" Comp VR Series Loaded Enclosure
  • Power Handling:
    • Peak: 1600 watts per system / 800 watts each sub
    • RMS: 800 watts per system / 400 watts each sub
  • Enclosure impedance: 4 ohms (Wired internally in series/parallel to final 4 ohm impedance)
  • Injection molded SoloKon cone
  • Ribbed Santoprene surround
  • Double stitched surround for enhanced cone-to-surround strength
  • Extra strong adhesive and stitching prevents the cone from detaching from the surround
  • Spiralead tinsel lead technology weaves the tinsel leads into the spider
  • Progressive-roll polycotton spider
  • Super rigid cone and 360-degree back bracing eliminate distortion
  • Sturdy steel basket holds the subwoofer mounted firmly
  • Steel basket features perimeter venting around the dual voice coils
  • Large, high-mass pole piece for dissipating potentially damaging heat
  • Strong spring-loaded terminals
  • Newly re-designed 2010 basket structure
  • High-Temperature 4 ohm voice coil
  • Powerful rear magnet
  • Frequency response: 25-500 Hz
  • Sensitivity: 86.9 dB
  • Also found as: DCVR10-4, 10DCVR10-4
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty(subwoofer only)

Enclosure Specifications:

  • Subwoofer specific ported enclosure for the CompVR subs
  • Tough and durable wooden enclosure
  • Covered with dense gray carpet
  • Front baffle has a monogrammed, carbon fiber design
  • Kicker emblem on the front of the box
  • Ported and tuned to the subwoofer's specifications
  • Built from durable 3/4" MDF construction
  • Dimensions: 28-3/4"W x 14-1/8"H x 13-1/2"D(Top) x 16-1/2"D(Bottom)
Enclosure Specifications:
  • Single 12" Sealed Truck Enclosure
  • Smallest sub-loaded enclosures from KICKER
  • Easy-to-use impedance designated at the terminal cup assembly
  • Tough KICKER wood enclosure
  • Dense gray carpeting
  • Monogrammed, carbon-fiber front baffle
  • Dimensions: 3-7/8"TD x 6-5/16"BD x 13-7/16"H x 21-13/16"W

NVX SDBP40 Features:

  • Ten 18" x 32" Pieces of Dead Shield Sound Dampening Material
  • Eliminates road noise
  • Quiets vibrations
  • Stops rattles
  • Increases SPL
  • Reduces heat
  • Easy to form aluminum conforms to desired area of vehicle with ease
  • Four step peel and stick design for easy installation
  • Increases sound quality and output of car audio system
  • Up to 30% thicker than the leading competitors
  • 40 Square feet total
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
  • Dimensions (each piece): 18"L x 32"W
  • Subwoofer Specifications

    Subwoofer Series
    Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
    Subwoofer Size
    Refers to the diameter of the subwoofer, measured in inches.
    10"
    Voice Coil(s)
    Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
    Dual
    Impedance (Per Voice Coil)
    The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
    4 ohms
    RMS Power Handling
    The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
    400 watts
    Total RMS Power Handling
    This is the total RMS power handling of all the subwoofers included in the package or enclosure.

    If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

    The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
    800 watts
    Peak Power Handling
    Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
    800 watts
    Total Peak Power Handling
    This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

    If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

    Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
    1600 watts
    Woofer Composition
    Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
    SoloKön
    Woofer Surround
    A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
    Santoprene Rubber
    Sensitivity
    An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
     
    Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
    86.9 dB
    Frequency Response
    The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
    25 - 500 Hz

    Enclosure Specifications

    Box Type
    Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

    Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

    Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

    Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
    Vented / Ported
    Number of Subs/Speakers
    This value represents the number of speakers or subwoofers that the enclosure accommodates.
    2
    Box Style/Shape
    The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
    Hatchback Style, Angled Back
    Height
    The height of the item, measured from top to bottom, in inches.
    14-1/8"
    Width
    The width of the item from left to right (side-to-side) measured in inches.
    28-3/4"
    Depth
    The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
    13-1/2"
    Second Depth
    The second depth is used only when the box is slanted or angled. This value is the top measurement and it is measured in inches.
    16-1/2"
    Wood Thickness
    The thickness of the wood the enclosure is made of, measured in inches.
    3/4"
    Number of Terminals
    The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
    1
    Terminal Type
    Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

    Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

    Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

    Spring posts
    Box Exterior Color
    The color of the enclosure's exterior/outer finish.
    Gray
    Box Finish
    The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
    Carpet

    Specials with this Item

    Promotions
    Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

    Warranty and Return Policy

    Parts Warranty Duration
    1 year
    Labor Warranty Duration
    1 year
    Warranty Provider
    Manufacturer

    Summary of Customer Ratings & Reviews

    Rating Distribution

    5 Star
    0%
    4 Star
    0%
    3 Star
    0%
    2 Star
    0%
    1 Star
    0%

    Average Attribution Rating

    Durability
    0.0
    Value
    0.0
    Features
    0.0
    Design
    0.0
    Usability
    0.0

    Accessory Tools and Products

    Accessories added

    NVX Speaker Wire (XWS1225)

    25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

    Your Price $39.99

    NVX Sound Dampening Trunk Kit (SDTK20)

    20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

    Your Price $59.99

    NVX Sound Dampening Rubber Roller (SDRLR1)

    Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

    Your Price $7.99

    Car Stereo and Speaker Installation Tool Kit

    Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More

    Your Price $12.99

    Hide answersShow all answers | Sort by
    No questions have been asked about this item. Be the first!

    Product Summary

    Manufacturer

    Model Number

    10DCVR104_SDBP40

    Weight

    105.00lbs

    Internal SKU

    10dcvr104_sdbp40

    Internal Product ID

    36786

    Sonic Electronix Wiring Guide

    Wiring Diagram Legend

    Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

    Product Name: 1600W Kicker 10DCVR104 + Sound Dampening Material Bass Bundle