Garage
Shop

Kicker Amplifier and Speaker Bundle

6-3/4" KS650.2 Component Car Speakers + Kicker IX500.4 4-Channel Class D Amplifier + Kit + Sound Damp

Kicker
Shop all Kicker
Product videos
highlight-star-icon

6-3/4" KS Series Component System • 300W Max • 150W RMS • IX Series 4-Channel Class D Car Amplifier • MOSFET Power Supply • CEA-2006 Compliant Amplifier • Amplifier Kit • Sound Dampening Material

Learn more about the 11ix5004_08ks6502

We apologize

This item has been discontinued

Product Highlights


6-3/4" KS Series Component System • 300W Max • 150W RMS • IX Series 4-Channel Class D Car Amplifier • MOSFET Power Supply • CEA-2006 Compliant Amplifier • Amplifier Kit • Sound Dampening Material

Description


Kicker brand icon

Authorized dealer

Kicker Amplifier and Speakers Bundle

This Sonic Electronix Exclusive offer showcases a pair of 6-3/4" Kicker KS650.2 Component Car Speakers. These speakers are rated at 300 watts Peak power per set, and 150 watts RMS per set. The speakers feature a Injection Molded Polypropylene cone woofer and Santoprene surround for rigidity and optimum performance. The component system features symmetrical high and low pass crossovers, that allow you to control your music more in depth. With a 4 Ohm impedance, 1" Aluminum dome tweeter, and 3-position tweeter attenuation, these speakers are great if you are looking to improve that factory installed sound in your vehicle.

In order to provide the sufficient power to the KS speakers, this bundle will also include a Kicker IX500.4 4-Channel Class D IX Series Amplifier. This amplifier is rated at 75 watts x 4 Chan. @ 4 Ohms, 125 watts x 4 Chan. @ 2 ohms, and 250 watts x 2 Chan. @ 4 Ohms bridged. The amplifier features Kicker's Fail Safe Technology, that helps to reduce noise or electrical interferences that are usually caused by engines, alternators or any other source throughout your vehicle. Also featured is variable high and low pass filters for complete control of your music. This CEA-2006 compliant amplifier will give true rated power. In addition this bundle will include a complete 4 gauge amplifier kit with RCA interconnect cables for complete installation. In order to increase the overall sound quality and output from your system, this bundle also includes 2 10" x 10" Pieces of Dead Shield Sound Dampening Material. The sound damp will reduce road noise, vibrations and rattles that diminish the sound quality of your car audio system. This bundles has everything you need to take your factory sound and make it a sound all your own.

Kicker KS650.2 Features:
  • 6-3/4" KS Series Component System
  • Power Handling:
    • Peak: 300 watts per set / 150 watts each side
    • RMS: 150 watts per set / 75 watts each side
  • Injection molded polypropylene cone woofer
  • Santoprene surround
  • 1" Aluminum dome tweeter
  • Neodymium magnet with ferrofluid
  • Includes symmetrical 12 dB/octave high pass and 12 dB/octave low pass crossover/protection network
  • 3-Position tweeter attenuation
  • Includes metallic finish and grilles
  • 4 ohms impedance
  • Top-mount depth: 2-1/8"
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Kicker 11IX500.4 Features:
  • IX Series 4-Channel Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 75 watts x 4 chan.
    • 2 ohms: 125 watts x 4 chan.
    • Bridged, 4 ohms: 250 watts x 2 chan.
  • Total RMS power output: 500 watts
  • Max Power output: 1000 Watts
  • High-efficiency nonregulated MOSFET power supply
  • LED power (blue) and protect (red) indicators
  • Variable Bass Boost (0 to +18 dB bass boost at 40 Hz)
  • Optional Kicker 10IXSM stacking mounts available for a clean install
  • Optional vinyl skins for personalizing heat sinks available
  • Super-small footprint for easy mounting, decreased weight, and increased cargo space
  • 4/3/2 channel operation
  • Preamp RCA outputs
  • 5-Way System Protection circuitry (thermal, overload, speaker short protection, undervoltage, amd overvoltage)
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Input sensitivity:
    • Low level: 125mV-5V
    • High level: 250mV-10V
  • Built-in electronic crossover for variable high-pass filters, low-pass filters, and off (bypass)
  • Variable high-pass filter (50-200 Hz, 12 dB/octave)
  • Variable low-pass filter (50-200 Hz, 12 dB/octave)
  • CEA-2006 compliant amplifier
  • Frequency response: 20-20,000 Hz
  • Dimensions: 11-3/8"L x 7-7/8"W x 2-3/16"H
  • 4-gauge power and ground wiring is required for installation.
  • Authorized Internet Dealer
  • 2-year Manufacturer's warranty
The Install Bay AK4 Features:
  • Complete 4 Gauge Amplifier Installation Kit with RCA Interconnect Cables
  • Perfect for 1600 watts amplifier setup
  • Includes everything that you need to install a single amplifier
  • Premium power and ground cable
  • 1-year Manufacturer's warranty
The Install Bay AK4 Includes:
  1. 17 ft. of Blue power cable
  2. 3 ft. of Black ground cable
  3. 17 ft. of Clear/blue RCA cable
  4. 25 ft. of Speaker wire
  5. 17 ft. of Remote turn-on wire
  6. In-line AGU fuse holder
  7. 60 Amp AGU fuse
  8. Installation hardware
Cache CSM Features:
  • Pair of Two 10" x 10" Pieces of Dead Shield Sound Dampening Material
  • Eliminates Road Noise
  • Quiets Vibrations
  • Stops Rattles
  • Increases SPL
  • Reduces Heat
  • Simple To Install
  • Easy To Form Aluminum
  • Four step peel and stick installation
  • Increases sound quality and output
  • Up to 30% thicker than the leading competitors
  • Dimensions (each piece): 10"L x 10"W

Specifications & Details


Front Speaker Specifications
Speaker Size
6-3/4" (Oversized 6-1/2")
Design
2-way Component System
Tweeter Design
Dome
Tweeter Composition
Aluminum
Woofer Composition
Injection Molded Polypropylene - IMPP
Woofer Surround
Santoprene Rubber
Peak Power Handling
150 watts
RMS Power Handling
75 watts
Sensitivity
88 dB
Frequency Response
35 - 21000 Hz
Impedance (Per Voice Coil)
4 ohms
Top-Mount Depth (Mounting Depth)
2-1/8"
Cutout Dimensions
5-5/8" x 5-5/8" 
Amplifier Power Specifications
RMS Power @ 4 ohms
75 watts x 4 channel
RMS Power @ 2 ohms
125 watts x 4 channel
Bridged RMS Power
250 watts x 2 channel
Peak Power Output
250 watts x 4 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
4-Channel
Total Peak Power Output
1000 watts
Total RMS Power Output
500 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
<1%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
50 - 200 Hz
Low-Pass Crossover Frequency
50 - 200 Hz
Signal-to-Noise Ratio
85 dB
Bass Boost
0 - 18 dB
Remote bass/level controller
No
Fan Cooled
No
CEA-2031 Compliant
Yes
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

11IX500.4_08KS650.2

Weight:

20.97lbs

Internal SKU:

11ix5004_08ks6502

Internal Product ID:

36900

Product and How-to Videos


Customer Ratings & Reviews



5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
0
Value
0
Features
0
Design
0
Usability
0

Customer Reviews

Sort by:

Loading...
Sorry, no reviews found

Add-ons


Related Products

This item is frequently compared to these items

Install Bay 4 Gauge Amplifier Power Wiring Kit (AK4)

• 4 Gauge Amplifier Installation Kit with RCA Interconnect Cables
• Perfect for 1600 Watts Amplifier Setup
• 17ft. Blue Power Cable
• 3ft. Black Ground Cable
• 17ft. Blue RCA Cable

(114)

$29.99

Related Searches


11IX500.4_08KS650.2 small

Item added to your cart.

Price: $400.87

Essential add-ons
NVX XKIT44 4-Gauge 4-Channel Wiring Kit

4-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$149.99

$109.99

Add to cart
Five Piece Installer's Panel Removal Tool Kit

Helps with removing dash and trim panels during installation.

$18.99

$11.99

Add to cart
18 Butt Connectors, 2 Ring Terminals, and Zip Ties

Great for connecting your car stereo wires to the harness

$9.95

$9.95

Add to cart
NVX XBG3PK Big 3 Kit with True 0 Gauge 100% Oxygen-Free Copper

1/0 AWG Big 3 Upgrade Kit with 100% OFC Wire for Audio Sytems up to 350 Amps

$114.99

$99.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon