Release the Beast
Do you need some serious power output from a reliable source? Well then RE Audio's XTX Series MT10K Class D Monoblock amplifier is what you have been looking for. With an outrageous 7,500 watts RMS at 1 ohm this amplifier is for those who are seeking to power up competition level bass. Equipped with variable low-pass and subsonic filters, along with a 180° phase shift control, this amp will give you the ability to control the frequencies of your bass to better suit your needs. Its 4-way protection circuitry assures the safety of your amplifier, devices and audio system from any possible shorts or overloads. This monstrous amplifier can power up two RE Audio 15" XXX15D4 subwoofers without skipping a beat, making ideal for powering up multiple subwoofers with high power ratings. The amplifier also features a wired remote bass level control so that you can control the bass output within an arm's reach. So if you are serious about entering the Sound Pressure Level competition world of the car audio industry, RE Audio's MT10K is the amplifier you want have at your side.
- MT10K Monoblock Full Digital Class D Linkable Amplifier
- RMS Power Rating:
- 1 ohm (12.0V): 3400 watts x 1 chan.
- 1 ohm (14.4V): 5000 watts x 1 chan.
- 1 ohm (16.0V): 5900 watts x 1 chan.
- 1 ohm (18.0V): 7500 watts x 1 chan.
- Dynamic power output: 15,000 watts
- Dual PWM MOSFET power supplies
- Wired remote bass level control included.
- LED power and protection indicators
- Variable Bass Boost (0 to +18 dB bass boost at 45 Hz)
- Mono channel operation
- MASTER and SLAVE selectable switch operation
- Preamp RCA outputs to daisy chain multiple amps
- 4-Way System Protection circuitry (thermal, overload, speaker short, and DC protection)
- Heavy duty aluminum alloy heatsink for extreme heat dissipation
- Heavy duty copper layer double sided epoxy PCB
- Nickle-plated RCA level inputs
- Nickle-plated screw terminals
- Input sensitivity:
- Variable low-pass filter (35-300 Hz, 24 dB/octave)
- Variable subsonic filter (10-60 Hz, 24 dB/octave)
- Phase Shift: 0-180°
- Damping factor: >350 into 1 ohm
- Dual 0 AWG battery input connectors
- External 250A x 2 fuses required (In-line)
- Frequency response: 10-350 Hz
- Dimensions: 24-7/16"L x 11-13/16"W x 2-7/8"H
- 2 x 0 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
|
Average Customer Rating is 3.5 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability | | 4.0 |
| Value | | 2.5 |
| Features | | 2.5 |
| Design | | 4.0 |
| Usability | | 3.0 |
| what's this? |
|
|
Quick Comparison:
|
|
Most Helpful Customer Reviews:
|
Review by
Dustin from Sylvan Lake, AB, Canada
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
This amp is very powerful. People that say otherwise are do it yourself-ers that don't know how to wire it properly. I have it pushing two 15" re xxx and it hits 153db.
|
|
Review by
Stewie from Rockford, Illinois
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
This is a beast of an amp but, in no way pushes what it says. If you have a high output altenator and a seperate battery it will push 2 13w7 nice but isnt very clean. I think JL's HD1200 would do the same thing but sound even more clean. This amp is great for a wall of subs that arent watt hungry like under 500watts. Basically this amp is ok but your not getting every watt they say you do according to my meters. 3,567 watts is the very most i could get out of it doing everything i could!
|
Customer Service
