4" x 6" 2-Way Kappa Speakers (KAPPA462.9CFP) with 4 Square Feet of NVX Sound Dampening
4" x 6" Kappa Series 2-Way Plate Speakers • 180W Max • 60W RMS • Woven Glass Fiber Cone Woofer • Rubber Surround • Edge Driven MMD Dome Tweeter • Direct Connect Computer-Optimized, Voice-Matched Outboard Passive Crossover • 4 Square Feet of NVX Sound Dampening Material
Learn more about the 4629cfp_sdvk44" x 6" Kappa Series 2-Way Plate Speakers • 180W Max • 60W RMS • Woven Glass Fiber Cone Woofer • Rubber Surround • Edge Driven MMD Dome Tweeter • Direct Connect Computer-Optimized, Voice-Matched Outboard Passive Crossover • 4 Square Feet of NVX Sound Dampening Material
This Infinity Kappa 682.9cf is the essence and trademark of Infinity car audio. With all the high-end engineering and technology that goes into each Kappa speaker, you will sure that you are receiving only the highest quality components. Made with a woven glass fiber woofer cone, which contributes to low cone flex, low distortion, and enhanced acoustic clarity. Due to the increased power handling of the Kappa series, the Kappa 682.9cf feature edge-driven MMD dome tweeters that allow for a seamless sonic integration between the tweeter and the mid-woofer. Using the latest in loudspeaker engineering, each of the crossovers has computer optimized voice-matched outboard passive crossovers for flawless performance.
The Infinity 682.9cf features a patented Unipivot tweeter design that ensures proper imaging when the speakers are installed. With the tweeter capable of being moved, it is positional and rotational even after the final screw secures the speaker in the door. Since most speakers are installed low in the door, the Unipivot design brings the soundstage up to the listener for more accurate and enjoyable experience. Each of the Kappa coaxial speakers, such as the Infinity Kappa 682.9cf feature adjustable tweeter level control. This switch will adjust the tweeters output by 3 dB. That simple tuning can make all the difference in your system and it ensures that your Kappa speakers will deliver exactly the sound that you are looking for.
The engineers at Infinity have developed a speaker that works for all applications. The True Four Ohm Technology used in these speakers make it perfect for running directly of a headunit or with an aftermarket headunit and amplifier. All of the speakers in the Infinity Reference line feature a 2 ohm voice coil. However, when you factor in the small OEM speaker wire of most vehicles and the heating in the voice coil during use, the impedance actually seen by the amplifier will increase. Infinity has adjusted the speaker to be safely connected to any headunit.
In order to improve the all around sound of your audio car system, this bundle also includes two 10" x 10" pieces of NVX Sound Dampening Material. Sound dampening material is key to reducing the rattles and shakes in your car. It effectively reduces the amount of road noise that is let in through the thin panels of your vehicle. It also lessens vibrations that are created by playing music through your speakers. It works by adding weight to the desired panel, which lowers the resonating frequency. You will notice by adding this material to your car, your sound system will likely get noticeably louder. If you have subwoofers, this is the perfect kit for your vehicle.
NVX SDVK4 - 90mil 2.3mm THICK
4 Square Feet of Sound Dampening Material (One 18" x 32" Piece)
Quantity: 1
Priced Per Pair
Internal Product ID:
37331
Everybit as good as the more well known products
This came free with a bundled purchase,.. and I also purchased some Rattletrap Extreme as this wasn't enough for the car. I was expecting this to be mostly unusable due to the Name.
I was wrong.. it was every bit as good in thickness and adhesion as the more expensive brand I had bought. So if you can get this cheaper than other Sound material,.. go for it.
99
found this helpful.NVX SDVK4
Works great at a great price. I have it under my trunk lid and it keeps it from rattling too bad.
97
found this helpful.Good product, not the easiest
Used a few sqft of this material, along with the equivalent from Streetwires (PartsExpress) and a ton of Peal 'n Seal (Lowe's) for the rest.
I would say that Peal 'n Seal was the easiest to apply, but also the thinnest (an cheapest). So if you are doing some serious job you may want to double or triple the layers.
The NVX material was the thicker of the three I used, and once it's glued it stays soft which is very good. But beware, you will never get it off again. The only thing I would reproach is that the aluminum is quite thick, which makes it hard sometimes to comply with shapes. But it is good to fill in big gaps or openings and add some rigidity.
My preferred material is the Streetwire stuff, which is a bit cheaper. It was thick enough and compliant enough to make it really easy to install and it sticks like crazy while being forgivable if you make a mistake.
Have fun!!!
90
found this helpful.awesome
simply amazing before i installed it i could not hear a clean bass at all by trunk was rattling so much but now my trunk is solid and i'm enjoying the bass it's cheap and awesome NVX for the win
92
found this helpful.NVX better than the Rest
Great price, great quality. Plus delievery came fast. Will buy again for rear door.
94
found this helpful.awesome
this is the best stuff for the best price now
91
found this helpful.NVX SDVK4
I USED THIS PRODUCT TO INSULATE THE SHEETMENT AT THE KICKPANELS AND THE FLOOR AREA BEHIND MY REAR SEAT IN MY1972 VW SUPER BEETLE. THIS PRODUCT WORKED OUT GREAT FOR ME, NO VIBRATION, REALLY QUIETED THE ROAD NOISE ALSO. OVERALL A GREAT PRODUCT.
88
found this helpful.Great product!
This is the first sound dampening material that I've used so far and I have to say that I am quite impressed with the product. I used it to reduce the vibrations generated from my sub at the back of my car. Since then, sound quality has improved considerably. For the price, I strongly recommend this product.
86
found this helpful.works great
Less weight than other sound proofing I have used, cuts easy and with a hair dryer it will mold to any contour .
86
found this helpful.Perfect kit foe speaker installs or a single door.
This deadener works wonders for vibration and outside noise. It is thicker than Dynamat and will eliminate that horrible resonance caused by lower frequency notes transferred through sheet metal and rattles in plastic. It also improves sound quality and SPL.
82
found this helpful.Best selling similar products