Garage
Shop

1000W Massive Audio + Crossfire Bass Bundle

10" Massive Audio Rebel Series Subwoofer + Crossfire BMF500M Amplifier + 4 Gauge Amp Kit

EXCLUSIVE
Product videos
highlight-star-icon

10" Dual 4 ohm Rebel Series Subwoofer • 1000W Max • 500W RMS • BMF Series Monoblock Class A/B Car Amplifier • MOSFET Power Supply • Variable Bass Boost • Variable Low-Pass Filter • Military Spec. Audiophile Grade Components

Learn more about the bmf500m_rebel10

We apologize

This item has been discontinued

Product Highlights


10" Dual 4 ohm Rebel Series Subwoofer • 1000W Max • 500W RMS • BMF Series Monoblock Class A/B Car Amplifier • MOSFET Power Supply • Variable Bass Boost • Variable Low-Pass Filter • Military Spec. Audiophile Grade Components

Description


Massive Audio brand icon

Authorized dealer

Massive Audio and Crossfire Bundle

This Sonic Electronix Exclusive Bass package showcases a Crossfire BMF500M Amplifier along with a 10" Rebel Series Massive Audio Subwoofer. This excellent bass package pushes 600 watts of clean, continuous RMS power. The Massive Audio Subwoofer has Dual 4 Ohm Voice Coils; meant to be wired in parallel, to a final impedance of 2 Ohms. For more information regarding subwoofer wiring, please check out our Subwoofer Wiring Diagram.

This Massive Audio 10" Rebel Series subwoofer requires 500 watts of RMS power. The included Crossfire BMF500M amplifier will compliment this required power by supplying a perfect match-up of certified RMS continuous power. This package also includes a 4 gauge amplifier kit which is perfect to supply power to the amplifier. With the Massive Audio subwoofer, Crossifre amplifier, and The Install Bay amplifier kit, this bass bundle is great for anyone looking to upgrade their vehicle's audio system

Massive Audio Rebel 10 Features:
  • 10" Dual 4 ohm Rebel Series Subwoofer
  • Power Handling:
    • Peak: 1000 watts
    • RMS: 500 watts
  • Impedance: 4 ohm
  • Poly glass fiber caped UV treated paper cone provides accurate and high quality sound reproduction
  • Dual wave roll surround allows for high amounts of excursion
  • Custom designed stamp steel basket with heavy powder coat finish minimizes vibrations
  • Cone woven round tinsel leads
  • 5 Way binding posts with push or banana nickel plated terminal
  • FEMM Linear flux saturated motor design to reduce distortion
  • Twin poly-cotton dual roll spiders
  • Reinforced aluminum former
  • 2" CCAW Dual 4 ohm voice coil
  • 65 oz High ferrite stacked magnet structure
  • 20mm peak-to-peak excursion
  • Frequency response: 20-250Hz
  • SPL: 94.45 dB
  • Top mount depth: 5-1/4"
  • Cutout dimensions: 9-1/16"
  • 1-year SonicElectronix.com warranty
Crossfire BMF500M Features:
  • BMF Series Monoblock Class A/B Car Amplifier
  • RMS Power Rating: (12.5V)
    • 4 ohms: 250 watts x 1 chan.
    • 2 ohms: 500 watts x 1 chan.
  • Total power output: 500 watts x 1 chan.
  • High efficiency MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) indicator
  • Variable Bass Boost (0 to +12 dB at 45Hz)
  • Soft Start, on/off circuitry
  • Military spec. audiophile grade components
  • Multi-stranded power toroid
  • High-efficiency Bipolar output transistors
  • Wire free PC Board layouts
  • Over-sized capacitor bank
  • Variable high-pass and low-pass electronics crossovers
  • Mono channel operation
  • Preamp RCA outputs to daisy chain multiple amps
  • 5-Way System Protection circuitry
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Input sensitivity:
    • Low level: 0.15V-6V
  • Full-range crossover filter
  • Variable high-pass filter (50-150 Hz)
  • Variable low-pass filter (50-150 Hz)
  • Switchable on/off subsonic filter
  • Dimensions: 13"L x 8"W x 2-3/8"H
  • 4 gauge power and ground wiring is required for installation.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
The Install Bay AK4 Features:
  • Complete 4 Gauge Amplifier Installation Kit with RCA Interconnect Cables
  • Perfect for 1600 watts amplifier setup
  • Includes everything that you need to install a single amplifier
  • Premium power and ground cable
  • 1-year Manufacturer's warranty
The Install Bay AK4 Includes:
  1. 17 ft. of Blue power cable
  2. 3 ft. of Black ground cable
  3. 17 ft. of Clear/blue RCA cable
  4. 25 ft. of Speaker wire
  5. 17 ft. of Remote turn-on wire
  6. In-line AGU fuse holder
  7. 60 Amp AGU fuse
  8. Installation hardware

Specifications & Details


Amplifier Power Specifications
RMS Power @ 4 ohms
250 watts x 1 channel
RMS Power @ 2 ohms
500 watts x 1 channel
RMS Power @ 1 ohm
Not Stable
Amplifier Specifications
Amplifier Class
A/B
Number of Channels
1 - Mono
Total RMS Power Output
500 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
Not Specified
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
Full (AP)
High-Pass Crossover Frequency
50 - 150 Hz
Low-Pass Crossover Frequency
50 - 150 Hz
Subsonic Filter
Switcheable On/Off
Bass Boost
0 - 12 dB
Remote bass/level controller
Yes
Fan Cooled
No
Fuse Rating
25A x 3 
CEA-2031 Compliant
No
Subwoofer Specifications
Number of Subwoofers
1
Subwoofer Size
10"
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
4 ohms
RMS Power Handling
500 watts
Peak Power Handling
1000 watts
Woofer Surround
Dual Wave Roll
Woofer Composition
Glass Fiber
Minimum Sealed Box Volume
0.75 cubic feet
Maximum Sealed Box Volume
1.25 cubic feet
Minimum Ported Box Volume
1.1 cubic feet
Maximum Ported Box Volume
1.1 cubic feet
Sensitivity
94.45 dB
Frequency Response
20 - 250 Hz
Xmax (millimeters)
20mm Peak to Peak
Top-Mount Depth (Mounting Depth)
5-1/4"
Cutout Diameter
9-1/16"
Recommended Enclosure Type
Ported / Vented
Sealed
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

BMF500M_REBEL 10

Weight:

26.80lbs

Internal SKU:

bmf500m_rebel10

Internal Product ID:

37455

Product and How-to Videos


  • Dalek Massive @ Massive Audio Booth | CES 2014
  • Car Subwoofer Size Buying Guide | What Size of Sub Should I Get?
  • How To Install an Amplifier: Car Amplifier Basics Part 2

Customer Ratings & Reviews



5 star
51%
4 star
33%
3 star
11%
2 star
3%
1 star
2%



Durability
4.4
Value
4.6
Features
4.3
Design
4.6
Usability
4.6

Customer Reviews

Sort by:

Loading...

has it all

The following review is for AK4, which is a part of the bundle you are viewing.

Kit has everything you need for a hassle free installation, I was thinking I wasn't going to need it, but was glad I had it after things got going.

By steven on September 10, 2012

100

found this helpful.

Love

The following review is for AK4, which is a part of the bundle you are viewing.

I bought this my my 2007 jetta. It work really good the it was easy to put on. I would buy this again.

By Kiera on February 1, 2013

98

found this helpful.

2nd time with this install bay kit

The following review is for AK4, which is a part of the bundle you are viewing.

its a great kit for the price. I bought it once for a buddys Suby and then for my father in laws econoline van. never had a problem with either. sonic can be slow at shipping. but if on a budget this kit kicks butt for the price....not much online can compare for a 4 gauge and price. never a problem with feed back or crappy rca. might have to get a few better connectors but hey its a given. anyways great kit. also great for a basic systems. I wouldn't run more then 100 amps of power max.

By marklar on September 17, 2013

94

found this helpful.

Great Value!!!

The following review is for AK4, which is a part of the bundle you are viewing.

If your looking for an amp install kit with all of the necessities that doesn't cost and arm and a leg this is it. The kit came with everything needed to get power to my amp the length was perfect for a extended cab pickup. The RCA's lack a little but I just used these single channel RCA's to run my sub amp and I bought some Streetwire 4 ch RCA's for the 4 ch amp and it's turned out great. I've always had good luck with Install Bay products!!! I would recommend to any one in search of a good Amp Install Kit!!!

By Dalton on October 5, 2013

93

found this helpful.

Does what its suppose to do!

The following review is for AK4, which is a part of the bundle you are viewing.

This product is exactly what it is, a kit! I LOVE IT, everything i needed was included and durable! the 4ga wire is true to size! (not just labeled 4ga IT REALLY IS!) if needed, id purchase again!

By Alex on August 14, 2012

93

found this helpful.

New amp kit

The following review is for AK4, which is a part of the bundle you are viewing.

Not much to review, It works fine. The only issue is that the power cable doesn't fit into the fuse holder. The fuse glass and holder plastic actually cracked when trying to close it. I'm sure I'll have to replace them soon. Other then that, it's good enough to power my amp with no issues. Yes, I would recommend it to others, just be careful when connecting the fuse holder and power wire. Don't use force!

By Rey on November 12, 2013

93

found this helpful.

Decent for the money

The following review is for AK4, which is a part of the bundle you are viewing.

I originally bought and 8 gauge cuz that's what my amp called for, it was a joke so I returned it and got this 4. Easy return/ exchange. Sounds like it happens a lot...
I think these kits are measured on the outside including plastic diameter not the inside wire.

Anyways buy the next size down from what you need. Kit came with lots of little parts to make the install ez. Would buy again for a 200-400 watt amp

By Land rover on November 7, 2013

88

found this helpful.

Decent Install Kit

The following review is for AK4, which is a part of the bundle you are viewing.

This kit isn't too bad it does the job. The fuse holder seems a little bit cheap on the plastic material but it works. The power cable held up to my abuse when I ran it through my tight space trims in my vehicle and I had to really pull them hard to get through. The RCA cable is a bit thin but I used it for my subs anyways so no problems there.

By Michael on September 10, 2012

88

found this helpful.

AK4

The following review is for AK4, which is a part of the bundle you are viewing.

Bought the Installbay AK4, pretty decent pricing although its wire is very brittle and falls apart when splicing it so be careful. Also remember your going to need a crimping tool so look for one before getting too excited. Overall good product, no problems encountered

By image on March 3, 2011

87

found this helpful.

Great product!

The following review is for AK4, which is a part of the bundle you are viewing.

Now my 1993 honda accord sounds better than ever! Exellent product 100% recomended!

By Andres L. San Miguel on October 31, 2014

90

found this helpful.

Add-ons


Related Products

This item is frequently compared to these items

Install Bay 4 Gauge Amplifier Power Wiring Kit (AK4)

• 4 Gauge Amplifier Installation Kit with RCA Interconnect Cables
• Perfect for 1600 Watts Amplifier Setup
• 17ft. Blue Power Cable
• 3ft. Black Ground Cable
• 17ft. Blue RCA Cable

(114)

$29.99

Related Searches


BMF500M_REBEL 10 small

Item added to your cart.

Price: $308.48

Essential add-ons
Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

$59.99

$34.99

Add to cart
NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

$114.99

$99.99

Add to cart
40 Square Feet of Sound Dampening Material

Thicker than the competition, complete sound damping kit for entire vehicle! Use for trunk, doors, roof and floor.

$279.99

$89.99

Add to cart
Dynamat Sound Dampening Bulk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$383.95

$235.99

Add to cart
Stinger Sound Dampening Bulk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!

$219.00

$140.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$9.99

$7.99

Add to cart
Five Piece Installer Panel Removal Tool Kit

Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs

$18.99

$11.99

Add to cart
SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

$207.99

$199.99

Add to cart
Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

$461.99

$451.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon