Expert Service 1-877-289-7664 [Hours]

1200W Kenwood KFC-W3013PS + Enclosure Bass Package

12" Kenwood KFC-W3013PS KFC Series Subwoofer + MDFS12 12" Sealed Subwoofer Enclosure with Poly-Fil

Discontinued
|

We apologize

This item has been discontinued

Sonic Electronix Exclusive Bass Package

This combo package includes one Kenwood 12" KFC Series Subwoofer and a single 12" Sealed Subwoofer Enclosure. This sub enclosure is a perfect match for the 12" subwoofer. The Kenwood subwoofer features a polypropylene cone and urethane surround. This woofer is also equipped with spring post terminals and a dual ventilation system for extreme heat dissipation. The subwoofer enclosure is equipped with PolyFil for deeper bass and is constructed from durable 3/4" Medium Density Fiberboard covered in black carpet. Sonic Electronix is the only place you will find this perfectly matched combo.

Kenwood KFC-W3013PS Features:
  • 12" Single 4 ohm KFC Series Car Subwoofer
  • Power Handling:
    • Peak: 1200 watts
    • RMS: 400 watts
  • Polypropylene cone woofer
  • Urethane foam surround
  • Linear spider design for increased excursion
  • Spring post terminals
  • Double stacked magnet
  • Dual ventilation system
  • Frequency response: 34-300 Hz
  • Sensitivity: 85 dB
  • 1-year Sonic Electronix warranty
Enclosure Features:
  • Single Sealed 12" Enclosure
  • 3/4" High Quality MDF Material machine-cut to perfection
  • Professionally Sealed, caulked, and carpeted
  • Internal Volume: 1.21 cubic feet
  • Dimensions: 14-1/8"D x 14-1/8"W x 14-1/8"H
  • Durable black carpeting
  • Terminal cup installed with gold posts

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
400 watts
Total RMS Power Handling
This is the total RMS power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
400 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1200 watts
Total Peak Power Handling
This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
1200 watts
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Urethane
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
85 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
34 - 300 Hz
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
15.1 mm

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Sealed
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
1
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Square/Rectangle
Height
The height of the item, measured from top to bottom, in inches.
14"
Width
The width of the item from left to right (side-to-side) measured in inches.
14"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
14"
Wood Thickness
The thickness of the wood the enclosure is made of, measured in inches.
3/4"
Number of Terminals
The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
1
Terminal Type
Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

Binding posts (banana clip ready)
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Black
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
67%
4 Star
0%
3 Star
33%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.0
Value
4.0
Features
4.3
Design
4.3
Usability
5.0

Doug

Clinton Pa.

Overall
Durability
Value
Features
Design
Usability

A nice combination at a great price!

January 16, 2013

I coupled this up with a sony xm-1s amp and it sounds great. If you are looking to round out your sound system with a nice deep bass then this is a good deal at a great price. It will get plenty loud, but I'm not one to try to pound out the windows on my suv. I don't know about the durability, but I gave it 5 stars because as long as you don't clip the signal or overpower it any sub should last just fine.

0 of 0 found this helpful

Help our customers find the most helpful reviews

jackson

Tularosa, NM

Overall
Durability
Value
Features
Design
Usability

dont blame sub

September 28, 2011

i had the predecessor to this sub and i had it rms at 400 watts in a ported box and it pounded.... and pounded and pounded. as long as you know what you are doing you should never blow a sub especially a kenwood

0 of 0 found this helpful

Help our customers find the most helpful reviews

Mitch

Detroit, Michigan

Overall
Durability
Value
Features
Design
Usability

Good while it lasted...

August 22, 2011

It blew in a matter of a month. My amp definitely had it over powered, but I don't think I could have had the LPF any lower! It was good while it lasted.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

Your Price $39.99

NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

Your Price $59.99

NVX Sound Dampening Rubber Roller (SDRLR1)

Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More

Your Price $12.99

Items we think you might want

KFC-W3013PS thumbnail

Kenwood KFC-W3013PS

• 1200W Peak
• 400W RMS
• Polypropylene cone woofer
• Urethane foam surround
• Linear spider design for increased excursion
• Spring post terminals
• Double stacked magnet

Your Price $69.95

Product Summary

Manufacturer

Model Number

KFC-W3013PS_MDFS12

Weight

36.35lbs

Internal SKU

kfcw3013ps_mdfs12

Internal Product ID

37479

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: 1200W Kenwood KFC-W3013PS + Enclosure Bass Package