Expert Service 1-661-257-9993 [Hours]

2400W Kenwood KFC-W3013PS + Enclosure Bass Package

Pair of 12" Kenwood KFC-W3013PS KFC Series Subs + 12DSPF 12" Dual Sealed Sub Enclosure with Poly-Fil

Discontinued
|

We apologize

This item has been discontinued

Item Added to Cart

2400W Kenwood KFC-W3013PS + Enclosure Bass Package

Pair of 12" Kenwood KFC-W3013PS KFC Series Subs + 12DSPF 12" Dual Sealed Sub Enclosure with Poly-Fil

$185.33

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$22.99
Add Warranty
3 years of protection

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

$39.99

Add
NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$53.99

Add
Car Stereo and Speaker Installation Tool Kit

Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More

$18.99

Add

Don't see the accessory you're looking for?
View all available accessories for the 2400W Kenwood KFC-W3013PS + Enclosure Bass Package.

Get FAST answers from customers ASK a Question See questions answers

Sonic Electronix Exclusive Bass Package

This combo package includes two Kenwood 12" KFC Series Subwoofers and a dual 12" Sealed Subwoofer Enclosure. This sub enclosure is a perfect match for the 12" subwoofers. The Kenwood subwoofers feature a polypropylene cone and urethane surround. Thesw woofers are also equipped with spring post terminals and a dual ventilation system for extreme heat dissipation. The subwoofer enclosure is equipped with PolyFil for deeper bass and is constructed from durable 3/4" Medium Density Fiberboard covered in black carpet. Sonic Electronix is the only place you will find this perfectly matched combo.

Kenwood KFC-W3013PS Features:
  • Pair of 12" Single 4 ohm KFC Series Car Subwoofers
  • Power Handling:
    • Peak: 2400 watts total / 1200 watts each
    • RMS: 800 watts total / 400 watts each
  • Polypropylene cone woofer
  • Urethane foam surround
  • Linear spider design for increased excursion
  • Spring post terminals
  • Double stacked magnet
  • Dual ventilation system
  • Frequency response: 34-300 Hz
  • Sensitivity: 85 dB
  • 1-year Sonic Electronix warranty
Enclosure Features:
  • Dual Sealed 12" Enclosure
  • Internal box volume: 2.46 cubic ft. total air space - 1.23 cubic ft. per chamber.
  • High Quality 3/4" MDF Construction
  • Durable black carpeting
  • Pre-lined with Poly-Fil
  • Seams are fully caulked for better efficiency
  • 2 Separate chambers allowing each subwoofer its own air space
  • Gold post terminals for clean and easy wiring access
  • Box Dimensions: 28-1/2"L x 14-1/4"D x 14-1/4"HH

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
400 watts
Total RMS Power Handling
This is the total RMS power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
800 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
1200 watts
Total Peak Power Handling
This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
2400 watts
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Urethane
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
85 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
34 - 300 Hz
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
15.1 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Sealed
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
2
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Square/Rectangle
Height
The height of the item, measured from top to bottom, in inches.
14"
Width
The width of the item from left to right (side-to-side) measured in inches.
28-1/4"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
14"
Wood Thickness
The thickness of the wood the enclosure is made of, measured in inches.
3/4"
Number of Terminals
The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
2
Terminal Type
Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

Binding posts (banana clip ready)
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Black
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
50%
4 Star
25%
3 Star
25%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
3.5
Value
4.3
Features
4.0
Design
4.0
Usability
4.8
Cinch94

TX

Overall
Durability
Value
Features
Design
Usability
Kenwood subs

April 6, 2012

This babies bump really hard. I have two of them in a ported box hooked up to a Hifonics HFi1500D @ 2 ohms in my 98 Chevy silverado. But i think my amp is too big for them so I'm probably going to upgrade to more powerful subs. But i still get major-headache every time i get out of my truck...

3 of 4 found this helpful

Was this review helpful to you?

ethan

Booneville, AR

Overall
Durability
Value
Features
Design
Usability
Amazing

June 4, 2012

I just put this in my mustang, and although it was a tight fit it sounds amazing!! It hits hard and sounds clean over every kind of bass. I definitely recommend these subs after getting a pair myself.

2 of 3 found this helpful

Was this review helpful to you?

sea biscuit

raleigh nc

Overall
Durability
Value
Features
Design
Usability
awesome

December 31, 2011

I've owned two of these and they handle good power they are rated 400rms and ive had the 1800watt 9105d amp hooked up to just 1 and it never blew!!

2 of 3 found this helpful

Was this review helpful to you?

johnny b

Springfield TN

Overall
Durability
Value
Features
Design
Usability
not that good

September 16, 2011

My buddy had these in a ported box and he blew both of them on a 1000 watt amp but they hit hard before they messed up

1 of 2 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

Your Price $39.99

NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

Your Price $53.99

NVX Sound Dampening Rubber Roller (SDRLR1)

Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Complete Car Stereo Tool Kit, Includes Voltage Test Light, Wire Stripper and More

Your Price $18.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

2-KFC-W3013PS_12DSPF

Weight

69.70lbs

Internal SKU

2-kfcw3013ps_12dspf

Internal Product ID

37480

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: 2400W Kenwood KFC-W3013PS + Enclosure Bass Package