Expert Service 1-877-289-7664 [Hours]

14th Anniversary Sale--More Products Added

JVC KS-AX3104 + Complete Speaker Package

JVC KS-AX3104 4 Chan. Amp + CS-V627 6.5" Speakers + CS-V6937 6"x9" Speakers + Kit + Sound Dampening

Discontinued
|

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Complete Speaker Package with JVC

This complete speaker package showcases the JVC KS-AX3104 4-channel Class A/B amplifier. This great package deal from Sonic Electronix is perfect for anyone looking to completely upgrade the speakers in their car audio system. Along with the 4-channel amplifier this package will also feature a pair of JVC CS-V627 6-1/2" 2-way DRVN series coaxial car speakers, and a pair of JVC CS-V6937 6" x 9" 2-way DRVN series coaxial car speakers. These four new speakers will bring out the best in your music so that you can hear it as it was meant to be heard.

No package is complete with out some installation accessories, included will be a complete 8 gauge StreetWires ZN5K-08 amplifier kit, and StreetWires ZN5250 interconnect cables for complete installation. Here at Sonic sound quality is important, which is why we have included some Cache Sound Dampening Material. This sound dampening will eliminate road noise,rattles, and vibrations. It will also increase sound quality and output while making installation simple and easy. So if you are ready to take your listening experience to a new level with JVC then this package deal is something you wont want to pass up.

 

JVC KS-AX3104

800W Max, 4 Channel Class A/B DRVN Series Amplifier
Quantity: 1

JVC KS-AX3104 Features:
  • 4-Channel Class AB Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 60 watts x 4 chan.
    • 2 ohms: 90 watts x 4 chan.
    • Bridged, 4 ohms: 150 watts x 2 chan.
  • Max power output: 800 watts x 4 chan.
  • 4, 3, or 2 Channel operation
  • Class-AB circuit
  • MOS-FET power supply
  • MOS-FET Output Stage
  • Frequency response: 5 - 50,000Hz
  • Signal to Noise Ratio: 76dB
  • THD: Less than 0.04% at 4 ohms, 1kHz
  • Fixed high pass filter (150Hz, -12dB/oct)
  • Fixed low pass filter (80Hz, -12dB/oct)
  • Variable input RCA level control (0.3 - 6V)
  • Variable speaker input control (1.2 - 12V)
  • Nickel-plated RCA terminals
  • Nickel-plated power supply terminals
  • Nickel-plated speaker out terminals
  • Protection circuitry (thermal/short circuit/overload/DC offset)
  • Anti-Pop circuit
  • 4-gauge power and ground leads recommended.
  • Dimensions: 8-3/8”D x 13-1/4”W x 2-1/16”H
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

JVC CS-V627

6-1/2" 2-way Drvn Series Coaxial Speakers
Quantity: 1

JVC CS-V627 Features:
  • 6-1/2" 2-way Drvn Series Coaxial Speakers Speakers
  • Power Handling:
    • Peak: 260 watts per pair / 230 watts each
    • RMS: 80 watts per pair / 40 watts each
  • Carbon mica woofer cone
  • Hybrid cloth/rubber surround
  • 1" (2.5 cm) Midrange PEI balanced tweeter
  • Improved Crossover with enhanced mid range signals
  • Twin rubber edge enhances sound pressure with less distortion
  • 4 ohms impedance
  • Heat-resistant voice coil
  • Top-mount depth: 2-3/4" (43.5 mm)
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

JVC CS-V6937

6" x 9" 3-Way DRVN Series Coaxial Speakers
Quantity: 1

JVC CS-V6937 Features:
  • 6" x 9" DRVN Series 3-Way Coaxial Car Speakers
  • Power Handling:
    • Peak: 620 watts per pair / 310 watts each
    • RMS: 120 watts per pair / 60 watts each
  • Carbon mica cone material
  • Hybrid cloth and rubber surround
  • 1'" PEI midrange tweeter
  • 2-21/32" (6.7 cm) midrange tweeter with PEI cone and strontium magnet
  • Includes grills for speaker protection
  • 4 ohms impedance
  • High temperature voice coil
  • 15.7 oz magnet structure
  • Top-mount depth: 3-1/8"
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

StreetWires ZN5K-08

8 AWG Zero Noise ZN5 Series Amplifier Installation Kit for Systems up to 300 Watts
Quantity: 1

StreetWires ZN5K-08 Features:
  • 8 Gauge Power Amplifier Installation Kit
  • Designed specifically for car audio systems up to 300 watts
  • Premium power and ground wire provides optimal power transfer
  • Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
  • Super flex jacket allows the power and ground wires to be easily manipulated for easy installation
  • AFS Fuse holder offers ideal protection for medium powered systems
  • True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size
  • CEA-2015 Compliant
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
StreetWires ZN5K-08 Includes:
  1. 18 ft. of 8 AWG blue power cable
  2. 4 ft. of 8 AWG clear ground cable
  3. 16 ft. of 18 AWG remote turn-on wire
  4. One 8 AWG In-line AFS fuseholder
  5. One 60 Amp AFS nickel-plated fuse
  6. One 8 AWG 3/16" ring terminal
  7. One 18 AWG insulated butt connector
  8. One 18 AWG spade connector
  9. Two 8 Gauge Spade connectors
  10. One 8 AWG 5/16" ring terminal
  11. Eight cable ties

StreetWires ZN5250

16.4 ft. (5 Meters) of ZN5 Series 2-Channel Interconnect Cable
Quantity: 1

StreetWires ZN5250 Features:
  • Total fit collar provides a uniform contact to ensure a strong fit
  • Split center pin ensures a superior surface contact for better signal transfer
  • Sure grip molded body reinforces the entire connector assembly and is easy to engage or remove
  • Ultra flex dual jacket maintains perfect geometry
  • Twisted pair design protects against automotive interference
  • Oxygen-free copper eliminates oxidation that causes corrosion and signal loss
  • Parallel jacket
StreetWires ZN5250:
  • ZN5 Series 2-Channel Interconnect Cable
  • Length: 16.4 ft. (5 Meters)
  • Ultra flex clear jacket
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

NVX SDSK2

Speaker Kit - 2 Square Feet of Sound Dampening Material (Two 10" x 10" Pieces)
Quantity: 1

NVX SDSK2:
  • Two 10" x 10" Pieces of Series 3 Sound Dampening Material
  • Eliminates road noise
  • Dampens panel vibrations
  • Stops rattles
  • Increases loudness of your audio system
  • Reduces heat in the car
  • Easy to form aluminum conforms to desired area of vehicle with ease
  • Simple peel and stick design for easy installation
  • Increases sound quality and output of car audio system
  • Up to 30% thicker than the leading competitors
  • 1.38 Square feet total
  • Dimensions (each piece): 10"L x 10"W
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
Amount
1.38 ft.2
1.7 ft.2
1.38 ft.2
1.38 ft.2
1.38 ft.2
Application
Speaker
Speaker
Speaker
Speaker
Speaker
Thickness
1.7 mm
2.0 mm
2.3 mm
2.1 mm
2.2 mm

Front Speaker Specifications

Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6-1/2"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
2-way
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

Yes
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Balanced Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

PEI (Polyetherimide)
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Carbon Mica
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber-Coated Cloth
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
230 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
40 watts
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
1-3/4"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
4-15/16" x 4-15/16" 
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Rear Speaker Specifications

Speaker Size (Rear)

Refers to the size of the speaker.

Every vehicle has standard application sizes. Please contact us for your vehicle's specific speaker sizes if you do not know them.

6" x 9"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as 2-way, 3 drivers = 3-way and so forth. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer (main driver) and the tweeter. Center channel speakers are great for those looking to capture true surround sound in their car.
3-way
Shallow Mount Installation
This means that the speaker is designed to be installed in areas that do not have a lot of space. Shallow mount speakers will typically have a mounting depth of less than 2".
No
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Read below for a description of each and other designs.

Cone tweeters are simple, efficient and typically are the most reasonably priced.

Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound.

Semi-dome design is one with a dome placed inside a cone.

A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver.

An "EMIT" tweeter was introduced by industry leader Infinity. "EMIT" is the acronym for Electro Magnetic Induction Tweeter. They are a thin piece of plastic material with an etched voice coil on the surface of them suspended between 2 very powerful Samarium Cobalt magnets. This design is the key to the EMIT tweeters super fast, crystal clear high end sound.

A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.

Balanced Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as aluminum, titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

PEN is an acronym for the space age material "biaxially oriented polypropylene naphthalate film".

PEI (Polyetherimide)
Woofer Composition
The woofer cone material is essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene: thermoplastic plastics or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speaker manufacture.
Carbon Mica
Woofer Surround
The flexible ring around the edge of the woofer cone. Surrounds are usually made of cloth, foam or rubber. Rubber and composites tend to last longer and hold up better in harsh environments.
Rubber-Coated Cloth
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
310 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
60 watts
Impedance (per voice coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit you/your amp best.
4 ohms
Top Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of speaker(magnet) to the bottom of mounting holes on rim of speaker.(Most common application)
3-1/8"
Cutout Dimensions
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
8-9/16"5-3/4"
Speaker Grilles
If yes, then package of speakers includes matching speaker grilles. If no, then there are no grilles or included. If optional, then we most likely will also have an optional set of grilles that can be purchased separately.
Yes

Amplifier Power Specifications

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

60 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

90 watts x 4 channels
RMS Power @ 1 ohm

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 1 ohm, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

Not Stable
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

150 watts x 2 channels
Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison.

800 watts x 4 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

AB
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
4
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

800 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

150 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
8 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
4 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
.04%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
High-pass (HP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

150 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

80 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
Not Specified
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
76 dB
Channel Separation
Also referred to as crosstalk. The amount of interference on one stereo channel caused by the leaking of the other stereo channel. The higher the rating in decibels (dB), the better the Channel Separation.
Not Specified
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
Not Specified
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
No
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
Not Specified
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

No

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
5.0
Usability
5.0

ebony

bushkill pa

Overall
Durability
Value
Features
Design
Usability

excellent package

December 13, 2011

JVC is a good brand of product and this complete package is even better! Thank you.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

Big 3 Upgrade Kit 1/0 gauge with EnvyFlex cable, wire cutters, 2 battery and 4 ring terminals.

Your Price $134.99

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

This Big 3 Kit features HyperFlex cable and comes with everything you need to upgrade your factory power and ground wire.

Your Price $149.99

XS Power BIG3XS 1/0 Gauge Big 3 Upgrade Kit

The XS Power Big 3 Kit features 100% OFC XP Flex cable and includes everything you need to upgrade your factory power and ground wire.

Your Price $99.99

XS Power BIG3XP 1/0 Gauge Big 3 Upgrade Kit

The Big 3 Kit comes with everything you need to upgrade your factory power and ground wire.

Your Price $49.99

Items we think you might want

ZN5K-08 thumbnail

StreetWires ZN5K-08

• 8 Gauge Power Amplifier Installation Kit
• Designed Specifically for Car Audio Systems up to 300 Watts
• Made From 100% Oxygen-Free Copper
• Super Flex Jacket
• AFS Fuse Holder
• True-to-Gauge Cables/Wires

Your Price $59.95

ZN5250 thumbnail

StreetWires ZN5250

16.4 ft. (5 Meters) of ZN5 Series 2-Channel Interconnect Cable • Total Fit Collar • Split Center Pin • Sure Grip Molded Body • Ultra Flex Jacket • Twisted Pair Design • Oxygen-Free Copper

Your Price $22.95

Product Summary

Manufacturer

Model Number

KS-AX3104_CS-V627_CS-V6937

Weight

35.47lbs

Internal SKU

ksax3104_csv627_csv6937

Internal Product ID

38182

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JVC KS-AX3104 + Complete Speaker Package

  • How to Install a Car Amplifier
  • Sonic Electronix: The X Factor when Shopping Electronics