JBL System Integration + Amplifier and Kicker Speakers Combo Package

JBL MS-8

System Integration Digital Sound Processor
Quantity: 1

• RMS Power Rating:
  • 4 ohms: 18 watts x 8 chan.
• Max Power Rating:
  • 4 ohms: 30 watts x 8 chan.
• System Integration Digital Sound Processor
• Compatible with both factory and aftermarket systems
• Incredible performance improves every measure of audio performance including frequency response, bass performance, dynamics, clarity, detail and stereo imaging
• Simple, step-by-step set-up with the menu-driven calibration based on detailed input from binaural headset microphone
• Perfect for up to 8 channels of audio by producing a flat-response, full-bandwidth signal from up to eight input sources
• Built-in DSP Equalization improves the overall tonal accuracy by automatically compensating for the sonic characteristics of the speakers, electronics and vehicle interior
• Automatic DSP Time Correction ensures that the sound from all speakers arrives at the listener’s ears simultaneously, resulting in the best sound possible
• Sophisticated Crossover Functions give precise, user-selectable crossover points and crossover slopes for up to eight separate outputs
• Logic 7 Surround Processing creates a realistic 5.1 or 7.1 channel surround experience from 2-channel source material
• 31-Band graphic equalizer lets you tune the system to your personal taste
• Preamplifier controls enable complete control over the system volume, subwoofer volume, left/right balance, front/rear fader, bass/mid/treble tone controls, override DSP equalization, time correction, as well as the Logic 7 processing
• Stores up to five custom pre-sets in a favorites setting for easy one-button recall
• The five-line LCD display shows setup menus and the current operation status
• Includes a wireless RF remote to control the menu navigation, volume, as well as mute functions
• CEA-2006 Compliant
• Also found as: JBL MS8, MX8
• Frequency Response: 20–20,000 Hz
• Signal to Noise Ratio (Line-in/Line out): >90dB
• Signal to Noise Ratio (Line-in/Speaker out): >85dB
• Maximum Input Voltage (Speaker-Level Input): 15V
• Maximum Input Voltage (Line Input): 2.8V
• Maximum Output Voltage (Line Output): 2.8V
• Maximum Current Draw: 16A
• Stand-by Current Draw: <0.01A
• Dimensions: 8-3/8"D x 11-1/2"W x 2-3/16"H
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

• JBL MS-8 Digital System Processor
• 5-line LCD Display
• Display Mounting Bracket
• LCD Display Cable
• Wireless Remote Control
• Flush and Surface Mount hardware for wireless remote
• Bi-aural Microphone Headset
• Speaker input/ouput harnesses
• Various Mounting Screws
• Hex-keys for Mounting Screws
• Dual-Sided Self-Adhesive Pads
• Alcohol Prep Pads
• Setup and Owner's Manual CD
• Quick Start Guide in 16 languages

JBL MS-A1004

4-Channel Amplifier with Digital Input Mixer and Graphical Status Display
Quantity: 1

• MS Series 4-Channel Class D Car Amplifier
• RMS Power Rating:
  • 4 ohms: 100 watts x 4 chan.
  • 2 ohms: 100 watts x 4 chan.
  • Bridged, 4 ohms: 200 watts x 2 chan.
• Digital signal processing amplifier
• Pulse Width Modulated MOSFET power supply
• Wireless Remote bass level input (MS-WBC remote level control sold separately)
• Built-in display shows tone and gain settings
• Soft Start Turn-on
• 4/3/2 channel operation
• "Hi2" input setting provides factory system amps with output loads, eliminating "speaker disconnected" error messages
• Speaker-level inputs with signal sensing for automatic turn-on
• Preamp RCA outputs to daisy chain multiple amps
• 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
• Digital input-mixer control eliminates the need for Y adapters
• Heavy duty aluminum alloy heatsink for extreme heat dissipation
• CD for system setup included
• Gold-plated RCA level inputs
• Gold-plated screw terminals
• Input sensitivity:
  • Level: 100mV-15V
• Variable high-pass filter (20-20,000 Hz, 6, 12, or 24 dB/octave)
• Variable low-pass filter (20-20,000 Hz, 6, 12, or 24 dB/octave)
• CEA-2006 compliant amplifier
• Frequency response: 20-27,000 Hz
• Dimensions: 8-13/16"L x 7-1/4"W x 2-13/16"H
• 8-gauge power and ground wiring is required for installation.
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

Kicker QS65.2

6-1/2" QS-Series 2-way Convertible Component Speaker System
Quantity: 2 Pairs

• Two sets of 6-1/2" QS-Series 2-way Component Speaker System
• Power Handling:
• Peak: 400 watts per set / 200 watts each side
• RMS: 200 watts per set / 100 watts each side
• 3-Layer TriTech composite cone woofer
• Midwoofer surround type
• 30mm Teteron dome tweeter for extreme detail and high power handling
• Bi-amp configuration capabilities
• Selectable tweeter attenuation (1.5dB steps)
• Tweeters can be mounted flush, angled, or coaxially
• Crossover slope (24-high, 12-low dB/Octave 2.8kHz)
• High frequency output level: 0dB, 3+dB, 6+dB
• 4 ohms impedance
• Woofer Top-mount depth: 2-1/2"
• Tweeter mounting depth: 1-1/8"
• Item is a part of Kicker ProFit Group
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

Kicker PKD4

Dual 4 Gauge Power Amplifier Installation Kit
Quantity: 1

• Dual 4 Gauge Power Amplifier Installation Kit
• Designed specifically for car audio systems up to 1500 watts
• Premium power and ground wire provides optimal power transfer
• Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
• Twisted-pair technology eliminates noise for crystal clear sound
• ANL Fuse holder offers ideal protection for high powered systems
• Hyper-flex cable and wire
• 20ft(6.1m) Blue 4AWG power wire
• 3ft(0.9m) Black 4AWG ground wire
• 5ft(1.5m) Blue 8AWG power wire
• 5ft(1.5m) Blue 8AWG ground wire
• 20ft(6.1m) Blue 18AWG remote lead wire
• 1 Kicker 09FHS Fuse holder with 150 amp AFS fuse
• 2 Kicker 09DB1448 Distribution blocks
• Black rubber firewall grommet
• 2 4AWG Spade terminals
• 4 8AWG Spade terminals
• Authorized Internet Dealer
• 1-year Manufacturer's warranty
• 1 18AWG Spade terminal
• Black zip ties
• Red butt connector
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

Monster Cable MPC I402 2C-1M

S.28 ft. (1 meter) of 402 XLN+ XTREME Audio Interconnect Cable
Quantity: 2 Sets

• Split-Tip Center Pin improves contact pressure and lowers distortion, giving you a clearer signal transfer
• 8-Cut Turbine Ultra-Polished MirrorChrome Connectors maximize surface area and creates higher contact mass for precision signal transfer.
• Ultra-Low Profile Stubby Connector Design for easy installation
• 3-Way Time Correct Windings improve clarity and accurately reproduce amplitude and phase response
• MicroFiber Dielectric isolates individual wire networks for faster transfer
• PEX Dielectric Prevents signal loss and provides more accurate signal transfer
• Duraflex Hexmesh Protective Jacket minimizes friction for easy install
• XLN Xtreme Construction provides protection against interference up to 80dB
• Cable Length: 3.28 ft. (1 meter)
• Color: Silver/Gray
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Cache CBM

40 Feet, Ten 18" x 32" Pieces of Dead Shield Sound Dampening Material
Quantity: 1

• Ten 18" x 32" Pieces of Dead Shield Sound Dampening Material
• Eliminates road noise
• Quiets vibrations
• Stops rattles
• Increases SPL
• Reduces heat
• Easy to form aluminum conforms to desired area of vehicle with ease
• Four step peel and stick design for easy installation
• Increases sound quality and output of car audio system
• Up to 30% thicker than the leading competitors
• 40 Square feet total
• Dimensions (each piece): 18"L x 32"W

Sonic Electronix, Inc. can only ship Kicker products within the United States of America.