Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale- more products added!

Precision Power PPI P1000.1

1000W RMS Phantom Series Class D Full Range Monoblock Amplifier

In Stock
|

List price $349.95

$179.95

with warranty

You Save: $170.00 (48.58%)

Arrives by Tuesday, Aug. 5 to zip 20147

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Tue, Aug. 5

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

Save 50% on the NVX Bass Expanding Processor w/ Purchase!

Improve your bass by adding an NVX XBBR bass reconstruction sound processor and save 50% for a limited time too!

50.00

38335

766

Precision Power PPI P1000.1

$179.95

+

50% OFF

NVX XBBR

$99.99

Special Price $49.99 ($99.99 if purchased separately)

NVX XBBR

• Digital Bass Restoration/Booster Processor
• Low Frequency Adjustment
• Flat Frequency Response
• Removable Terminal Block
• 8 Volt Maximum Output Voltage

25% off a 4 Gauge Amp Kit with Purchase

You will need an amp kit to install your amp, and the Belva BAK42 is the perfect kit for this amp. For a limited time, when you click "Add Both to Cart", you'll receive 25% off the amp kit with the purchase of select amplifiers.

7.50

38335

294

Precision Power PPI P1000.1

$179.95

+

25% OFF

Belva BAK42

$29.99

Special Price $22.49 ($29.99 if purchased separately)

Belva BAK42

• Complete 4 Gauge 2-Channel Amplifier Installation Kit
• Designed Specifically For Car Audio Systems Up to 1000 Watts RMS
• Premium Power and Ground Wire Provides Optimal Power Transfer

(Offer 1 of 2)

Combined Total Price

$229.94

You Save $50.00

General Features

  • Phantom Series Class D Full Range Monoblock Car Amplifier
  • RMS Power Rating (14.4V):
    • 4 ohms: 580 watts x 1 chan.
    • 2 ohms: 725 watts x 1 chan.
    • 1 ohm: 1,000 watts x 1 chan.
  • RMS Power Rating (12V):
    • 4 ohms: 395 watts x 1 chan.
    • 2 ohms: 525 watts x 1 chan.
    • 1 ohm: 785 watts x 1 chan.
  • MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +12 dB bass boost at 50 Hz)
  • On/Off circuit delay
  • Mono channel operation
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-Way System Protection circuitry
  • SMT Circuitry
  • Composite double sided epoxy PCB
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Input sensitivity:
    • Low level: 200mV-6V
  • Variable low-pass filter (40-220 Hz, 12 dB/octave)
  • Subsonic filter (20-38 Hz 12dB/octave)
  • Damping factor: >91
  • Dimensions: 12-15/16"L x 6-3/4"W x 2"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Power Specifications - Subwoofer Channel

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
580 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
725 watts x 1 channels
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
1000 watts x 1 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
Phantom (Precision Power)
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

1000 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
1 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Not Bridgeable
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
High-pass (HP)
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

40 - 220 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
20 - 38 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
106 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 12 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
40A x 3 
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

No

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
69%
4 Star
23%
3 Star
8%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.5
Value
4.8
Features
4.5
Design
4.6
Usability
4.5

Roland

GA

Overall
Durability
Value
Features
Design
Usability

Great Amp!!!

September 28, 2013

Im ordering a second right now. Got my first one a year ago. today i'm ordering a second The good 1. True rated power. 2. Super clean sound. 3 Great features ( i wished the subsonic went up to 50hz but most people would not need that and i can EQ that) 4. The small size! . There are not any other quality amps this powerful at these price point so it a no brainier . The bad Like mentioned before, the placement of the speaker wire screws, and why not allen screws. BEST Value amp!! Also love my PPI P-900.4 one year old also.

1 of 1 found this helpful

Help our customers find the most helpful reviews

Marcus

Pflugerville, Texas

Overall
Durability
Value
Features
Design
Usability

this amp is great!!!

September 4, 2013

I got this amp over a year and half ago and its still going strong its small and very easy to install it packs a mean punch ..but the only thing I dont like is on the bass knob you don't hear any bass until you turn it alittle pass half way up

1 of 1 found this helpful

Help our customers find the most helpful reviews

Ryan

Flint, MI

Overall
Durability
Value
Features
Design
Usability

Solid Amp

April 15, 2014

I bought this amp about a month ago, and I've been driving a pair of 400W Kicker CVRs at a 1-Ohm load for extended periods of time. I've never had any problems with it so far. It heats up a little bit, but has never failed, entered protect mode, or caused any other sound/power issues I'm aware of. Setup is super easy. The gain knob feels a little cheap, but it has held up like new through daily use and a couple moves. Overall 10/10 would bang again lol.

0 of 0 found this helpful

Help our customers find the most helpful reviews

bert

pa

Overall
Durability
Value
Features
Design
Usability

ppi 10001.

February 18, 2014

Solid amp. Very very small foot print. Terminal extension/adapter works great and makes the install using large gauge wire very easy.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Harvey

Canada

Overall
Durability
Value
Features
Design
Usability

it kicks.

February 9, 2014

Bought it to match my ppi 900.4 after installing it i was driving one day and my bass quit. After some examination and checking, my kicker 10" L3 had burnt. A little too much for it. so i got a hold of a friend who had some spare filled boxes lying around. Got one with 2 12" in it(some old concepts) rewired them for both voice coils to 2ohms. Then in parallel to the amp. 1ohm load on it. Drives so hard it pounds the back of my neck. Very impressive for it's size.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Kenneth

Cornville, AZ

Overall
Durability
Value
Features
Design
Usability

Great Amplifier

January 19, 2014

I bought this amp to push two Precision Power BI.124 in a ported box and it does great job and I am very pleased. My only complaint is the Phillips connectors....all in all though...nice product. Once again...many thanks to Cyle!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Christopher

Berkeley, CA

Overall
Durability
Value
Features
Design
Usability

AMP OK - Bass knob NOT

December 31, 2013

I have 2 sundown audio sd-2 8"'s in appropriately sized sealed enclosures. I was running these on a Massive Audio N2 mini amp which did beat the crap out of the subs but would overheat after 45 minutes of Excision and Downlink at high volumes. This amp is about the same size H and W wise, only about twice as long but still fits under seat. OK so swapping was quick and I was very excited to have a bass knob. started to tune and couldn't figure out what was going until i realized the knob doesn't actually produce ANY bass until it was a little over 1/2 way, and then seems to go immediately to about 90% so i really have about 10% worth of play. Another review mentioned the same thing so I am curious if this is common or me and the other guy got "bad" bass knobs? I am pretty bummed to have a mostly non functional bass knob as in a truck some tracks are rather boomy and it was a main feature for choosing this amp over others with same size/power/etc requirements. SonicElectronix got this to me in 2 days btw and I am always happy with them and have been since they first came online many moons ago!

0 of 0 found this helpful

Help our customers find the most helpful reviews

keith

LaGrange, KY

Overall
Durability
Value
Features
Design
Usability

just amazed

October 27, 2013

I ordered this amp back in july pushing my 2 8" American bass xd's. let me just say I am truly amazed at how powerful this little amp is. my peak dB is 142.8. I have not had any issues out of the amp itself. the only issue I have with it is screwing in the power, ground, and remote wires. the way its design the case gets in the way a little.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Hoss

Milliken Co.

Overall
Durability
Value
Features
Design
Usability

Worth it

October 14, 2013

I have a Kicker L7 15 and was looking to replace an older MTX thunder amp that kept cutting out on me. I dont like to buy junk and I dont mind paying for quality but you dont always get what you pay for I dont care who said that. I bought the Phantom 1000.1 Mainly for its size and quality. Some guys complain that the terminals are blocked by the amps body but I had NO trouble turning the screws. I am running 1/0 ga wires and this amp came with an adapter to accept the large wires which really made things clean looking. This amp is way cleaner sounding and more accurate than my old MTX amp. Not that MTX is bad, its just an old amp and was having issues like ALL electronics have. For the price, this is a great quality amp. I have a small sealed box because I listen to metal and country and like the SQ over SPL and need my trunk space. Sonic had it shipped the next day for free and it actually arrived a day early. I recommend this amp and Sonic Electronics as long as its what your looking for. It fits my needs perfectly. Thanks Sonic for free shipping and the great service!!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Rob

Prattville, AL

Overall
Durability
Value
Features
Design
Usability

Powerful Amp

June 23, 2013

I have this amp powering two NVX 10's and the sound is amazing. I would highly recommend this amp to anyone looking for true power ratings. Make sure you have a good 4 gauge power and ground wire because it says you only have to use a 8 gauge but i wouldn't recommend that.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ryan

Saraland, AL

Overall
Durability
Value
Features
Design
Usability

Great Little Amps!

June 18, 2012

I installed a PPI P900.4 and a PPI P1000.1 under the driver's seat in 1998 Toyota Tacoma. These little amps are amazing the power they produce in such a small package. There are 3 things that I can say bad about the PPI is: 1.) Why use Phillips head screws for setting the gains and crossover points? 2.) The Phillip screws for the power and speakers wire holders are partial blocked by the bars made into the ends of the amp. I had to use a very small headed flat head screw driver to tighten the screws without stripping them. 3.) PPI why come out with a new amp and then have them on backorder for months? Even with my above complaints these amps are a definite best buy! Btw, SonicElectronix.com sent them at lightening speed! Within 2 days after my order, they were at my house!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Rocker

GC, Az

Overall
Durability
Value
Features
Design
Usability

I am amazed!!!

December 1, 2011

Been using this for about a month now. It is very very beautiful amplifier. I must say that this amp rocks! It puts out so much power!!! The output on this amp is crazy. I am using it with a Kicker L3 sub @ 4 ohms so it's getting 395w rms with 12v system, and this amp gives it a work out. I have not used it to the extreme yet. It gets a bit warm, but that is what the heat sink is supposed to do, get warm and dissipate the heat. I really like how thin it is. That was a big plus. I fit two right under my rear seat in my 08 Toyota Tundra double cab. I've always wanted a Precision Power sound system and i am gonna go PPI all the way. PPI and SonicElectronix YOU GUYS ARE AWESOME!!! Great products, great prices. P.S. Sorry Kicker! I think you've been outdone. But I still love ya!

0 of 0 found this helpful

Help our customers find the most helpful reviews

shawn

Canada

Overall
Durability
Value
Features
Design
Usability

not bad

September 17, 2013

its pretty good for the price. it kinda lies about the rms output though. i had a smaller amp before. with this amp the power for it is almost at full for same effect as the other one at 1/2. no issues with it over heating or blowing up which is a good start. i still have not been able to get the bass control unit to work though...

0 of 1 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX XKIT42 100% OFC True 4 Gauge Wiring Kit with RCA Cables and Speaker Wire

The reviews speak for themselves, this is awesome wire with everything you need!

Your Price $89.99

Stinger SK4641 4 Gauge Wiring Kit

Get a high quality amp kit from Stinger to get the most from your new amp!

Your Price $64.99

Belva BAK42 4 Gauge Amplifier Installation Kit

Great amps need great wire at a great price. This amp kit has everything you need!

Your Price $29.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $79.99

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

Get all you need including wire cutters to upgrade your power and ground wire.

Your Price $149.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $39.99

StreetWires FB4

4 AWG / 4 Gauge Firewall Bushing

Your Price $6.95

StreetWires FB0

1/0 Gauge Firewall Bushing

Your Price $6.95

NVX XDBU4 - Top of the Line!

Distribution Block with Two 1/0 or 4 AWG Inputs and Four 4 or 8 AWG Outputs

Your Price $17.99

Professional Installation for your Car Power Amplifier

Covers labor charges through our professional installer network.

Your Price $89.99

NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $11.99

NVX XIX25 X-Series RCA Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $26.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $13.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

Scosche SPL Meter SPL1000F

Handheld boomSTICK measures your SPL range from 60 to 135 dB

Your Price $21.99

AutoSound 2000 CD-102

High Frequency Test CD specifically designed for the set-up and evaluation of sound system imaging and placement.

Your Price $11.99

AutoSound 2000 CD-104

Audiophile reference series test disc for evaluation of all audio components.

Your Price $11.99

Product Summary

Manufacturer

Model Number

P1000.1

UPC

709483038219

Weight

7.50lbs

Internal SKU

p10001

Internal Product ID

38335

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Precision Power PPI P1000.1

  • Precision Power Phantom Amplifiers
  • How to Install a Car Amplifier