Garage
Shop

Precision Power PPI P1000.1

1000W RMS Phantom Series Class D Full Range Monoblock Amplifier

Product videos
highlight-star-icon

• RMS: 580W x 1 @ 4 ohms, 725W x 1 @ 2 ohms 1000W x 1 @ 1 ohm
• Total RMS Power: 1000W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• 1 Pair of Preamp Outputs
• Dimensions: 12-15/16" L x 6-3/4" W x 2" H

Learn more about the p10001

We apologize

This item has been discontinued

Product Highlights


• RMS: 580W x 1 @ 4 ohms, 725W x 1 @ 2 ohms 1000W x 1 @ 1 ohm
• Total RMS Power: 1000W
• Wired Bass Remote Included
• Bass Boost: 0-12 dB
• 1 Pair of Preamp Outputs
• Dimensions: 12-15/16" L x 6-3/4" W x 2" H

Description


Precision Power brand icon

Authorized dealer



Sonic Electronix Power Certified Amplifier

Precision Power's P1000.1 monoblock amplifier is a Sonic Electronix Certified Amplifier. This amp's power output has been professionally tested with our SMD Amplifier Dyno, bringing you it's true power ratings.

Impedance
Claimed Output
Certified Results
Dynamic Results
4 Ω
580W @ 14.4V
610W @ 14.05V
635W @ 14.11V
2 Ω
725W @ 14.4V
938W @ 13.91V
1058W @ 13.99V
1 Ω
1000W @ 14.4V
1162W @ 13.61V
1654W @ 13.87V



General Features

  • Phantom Series Class D Full Range Monoblock Car Amplifier
  • RMS Power Rating (14.4V):
    • 4 ohms: 580 watts x 1 chan.
    • 2 ohms: 725 watts x 1 chan.
    • 1 ohm: 1,000 watts x 1 chan.
  • RMS Power Rating (12V):
    • 4 ohms: 395 watts x 1 chan.
    • 2 ohms: 525 watts x 1 chan.
    • 1 ohm: 785 watts x 1 chan.
  • Sonic Electronix Certified Power Rating*:
    • 4 ohms: 610 watts x 4 chan.
    • 2 ohms: 938 watts x 4 chan.
    • 1 ohm: 1162 watts x 1 chan.
  • MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +12 dB bass boost at 50 Hz)
  • On/Off circuit delay
  • Mono channel operation
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-Way System Protection circuitry
  • SMT Circuitry
  • Composite double sided epoxy PCB
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Input sensitivity:
    • Low level: 200mV-6V
  • Variable low-pass filter (40-220 Hz, 12 dB/octave)
  • Subsonic filter (20-38 Hz 12dB/octave)
  • Damping factor: >91
  • Dimensions: 12-15/16"L x 6-3/4"W x 2"H
  • 4-gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
580 watts x 1 channel
RMS Power @ 2 ohms
725 watts x 1 channel
RMS Power @ 1 ohm
1000 watts x 1 channel
Amplifier Specifications
Series
Phantom Series
Amplifier Class
D
Number of Channels
1 - Mono
Total RMS Power Output
1000 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
Low-Pass Crossover Frequency
40 - 220 Hz
Subsonic Filter
20 - 38 Hz
Signal-to-Noise Ratio
106 dB
Bass Boost
0 - 12 dB
Remote bass/level controller
Yes
Fuse Rating
40A x 3 
Strappable
No
Sonic Certified Amplifier
Yes
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

P1000.1

Weight:

7.50lbs

Internal SKU:

p10001

Internal Product ID:

38335

Product and How-to Videos


  • Precision Power PPI Phantom P1000.1 Car Amplifier | SMD D'Amore AD-1
  • Precision Power Phantom Amplifiers
  • How To Install an Amplifier: Car Amplifier Basics Part 2

Customer Ratings & Reviews



5 star
61%
4 star
32%
3 star
7%
2 star
0%
1 star
0%



Durability
4.5
Value
4.9
Features
4.5
Design
4.3
Usability
4.5

Customer Reviews

Sort by:

Loading...

Powerful Amp

I have this amp powering two NVX 10's and the sound is amazing. I would highly recommend this amp to anyone looking for true power ratings. Make sure you have a good 4 gauge power and ground wire because it says you only have to use a 8 gauge but i wouldn't recommend that.

By Rob on June 23, 2013

43

found this helpful.

Great Amp!!!

Im ordering a second right now.

Got my first one a year ago. today i'm ordering a second

The good
1. True rated power.
2. Super clean sound.
3 Great features ( i wished the subsonic went up to 50hz but most people would not need that and i can EQ that)
4. The small size!
.
There are not any other quality amps this powerful at these price point so it a no brainier
.
The bad
Like mentioned before, the placement of the speaker wire screws, and why not allen screws.

BEST Value amp!! Also love my PPI P-900.4 one year old also.

By Roland on September 28, 2013

42

found this helpful.

AMP OK - Bass knob NOT

I have 2 sundown audio sd-2 8"'s in appropriately sized sealed enclosures. I was running these on a Massive Audio N2 mini amp which did beat the crap out of the subs but would overheat after 45 minutes of Excision and Downlink at high volumes. This amp is about the same size H and W wise, only about twice as long but still fits under seat. OK so swapping was quick and I was very excited to have a bass knob. started to tune and couldn't figure out what was going until i realized the knob doesn't actually produce ANY bass until it was a little over 1/2 way, and then seems to go immediately to about 90% so i really have about 10% worth of play.

Another review mentioned the same thing so I am curious if this is common or me and the other guy got "bad" bass knobs? I am pretty bummed to have a mostly non functional bass knob as in a truck some tracks are rather boomy and it was a main feature for choosing this amp over others with same size/power/etc requirements.

SonicElectronix got this to me in 2 days btw and I am always happy with them and have been since they first came online many moons ago!

By Christopher on December 31, 2013

39

found this helpful.

just amazed

I ordered this amp back in july pushing my 2 8" American bass xd's. let me just say I am truly amazed at how powerful this little amp is. my peak dB is 142.8. I have not had any issues out of the amp itself. the only issue I have with it is screwing in the power, ground, and remote wires. the way its design the case gets in the way a little.

By keith on October 27, 2013

39

found this helpful.

not bad

its pretty good for the price.
it kinda lies about the rms output though. i had a smaller amp before. with this amp the power for it is almost at full for same effect as the other one at 1/2.
no issues with it over heating or blowing up which is a good start.
i still have not been able to get the bass control unit to work though...

By shawn on September 17, 2013

42

found this helpful.

Great price

Great amp for the price, just what I needed to upgrade my car audio

By Just for fun on September 7, 2014

37

found this helpful.

Great Amplifier

I bought this amp to push two Precision Power BI.124 in a ported box and it does great job and I am very pleased. My only complaint is the Phillips connectors....all in all though...nice product. Once again...many thanks to Cyle!

By Kenneth on January 19, 2014

36

found this helpful.

Great Little Amps!

I installed a PPI P900.4 and a PPI P1000.1 under the driver's seat in 1998 Toyota Tacoma. These little amps are amazing the power they produce in such a small package.

There are 3 things that I can say bad about the PPI is:

1.) Why use Phillips head screws for setting the gains and crossover points?
2.) The Phillip screws for the power and speakers wire holders are partial blocked by the bars made into the ends of the amp. I had to use a very small headed flat head screw driver to tighten the screws without stripping them.
3.) PPI why come out with a new amp and then have them on backorder for months?

Even with my above complaints these amps are a definite best buy! Btw, SonicElectronix.com sent them at lightening speed! Within 2 days after my order, they were at my house!!!

By Ryan on June 18, 2012

38

found this helpful.

Worth it

I have a Kicker L7 15 and was looking to replace an older MTX thunder amp that kept cutting out on me. I dont like to buy junk and I dont mind paying for quality but you dont always get what you pay for I dont care who said that. I bought the Phantom 1000.1 Mainly for its size and quality. Some guys complain that the terminals are blocked by the amps body but I had NO trouble turning the screws. I am running 1/0 ga wires and this amp came with an adapter to accept the large wires which really made things clean looking. This amp is way cleaner sounding and more accurate than my old MTX amp. Not that MTX is bad, its just an old amp and was having issues like ALL electronics have. For the price, this is a great quality amp. I have a small sealed box because I listen to metal and country and like the SQ over SPL and need my trunk space. Sonic had it shipped the next day for free and it actually arrived a day early. I recommend this amp and Sonic Electronics as long as its what your looking for. It fits my needs perfectly. Thanks Sonic for free shipping and the great service!!!!

By Hoss on October 14, 2013

37

found this helpful.

I am amazed!!!

Been using this for about a month now. It is very very beautiful amplifier. I must say that this amp rocks! It puts out so much power!!! The output on this amp is crazy. I am using it with a Kicker L3 sub @ 4 ohms so it's getting 395w rms with 12v system, and this amp gives it a work out. I have not used it to the extreme yet. It gets a bit warm, but that is what the heat sink is supposed to do, get warm and dissipate the heat. I really like how thin it is. That was a big plus. I fit two right under my rear seat in my 08 Toyota Tundra double cab. I've always wanted a Precision Power sound system and i am gonna go PPI all the way. PPI and SonicElectronix YOU GUYS ARE AWESOME!!! Great products, great prices.

P.S. Sorry Kicker! I think you've been outdone. But I still love ya!

By Rocker on December 1, 2011

37

found this helpful.

Add-ons


Similar Products

Best selling similar products

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(38)

$164.95

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(28)

$214.99

JL Audio JD1000/1

• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier

(2)

$399.99

Kicker CXA1800.1 (46CXA18001T)

• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier

(10)

$399.96

Crunch GP-3500.1D

• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier

(6)

$99.99

Related Searches


P1000.1 small

Item added to your cart.

Price: $169.97

Essential add-ons
Belva BAK42

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
Belva BAK42BK

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
Belva BAK42BL

Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$59.99

$34.99

Add to cart
InstallBay AK4ANL

Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder

$49.99

$29.99

Add to cart
Stinger SSK4ANL

Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder

$55.00

$32.99

Add to cart
Stinger SS1200XS

Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$119.00

$52.99

Add to cart
NVX XAPK4

4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$114.99

$84.99

Add to cart
Stinger SK4241

4 Gauge Power Amplifier Installation Kit

$129.00

$64.99

Add to cart
Stinger SK6241

4 Gauge Power Amplifier Installation Kit

$159.00

$79.99

Add to cart
NVX XLCA2X

2-Channel Line Out Converter

$159.99

$79.99

Add to cart
NVX XLCA2

2 Channel Line Out Converter with xBOOST

$62.49

$49.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

$149.00

$149.00

Add to cart
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$18.99

$12.99

Add to cart
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$14.99

$6.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

$269.00

$173.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
NVX XCAP1F

True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block

$124.99

$89.99

Add to cart
Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

$79.99

$34.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

$19.99

$10.99

Add to cart
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder

$9.99

$6.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
4/8 Gauge AGU Fuse Holder

4/8 Gauge AGU Fuse Holder

$9.99

$6.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder

$9.99

$8.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

$14.00

$9.99

Add to cart
Pair of 4 Gauge Spade Terminals, #8 Opening

Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated

$3.99

$1.99

Add to cart
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)

$9.99

$2.99

Add to cart
5 Pack of Black 4 Gauge Ring Terminals

5 Pack of Black 4 Gauge Ring Terminals

$6.99

$3.99

Add to cart
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing

$9.99

$9.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon