Pioneer and Kenwood Bass Bundle
This Sonic Electronix Exclusive Bass package showcases a Kenwood KAC-1502S Amplifier along with a 10" Shallow series preloaded Pioneer subwoofer enclosure. This excellent bass package pushes 200 watts of clean, continuous RMS power. The Pioneer loaded enclosure has been prewired and is meant to be wired directly to the amplifier, to a final impedance of 4 Ohms Bridged.
This Pioneer TS-SWX251 preloaded enclosure requires 200 watts of RMS power. The included Kenwood KAC-1502S amplifier will compliment this required power by supplying a perfect match-up of certified RMS continuous power. This package also includes an 8 gauge amplifier kit which is perfect to supply power to the amplifier. With the Pioneer loaded enclosure, Kenwood amplifier, and Xscorpion amplifier kit, this bass bundle is great for anyone looking to upgrade their vehicle's audio system
Pioneer TS-SWX251 Features:
- 10" Single 4 ohm Shallow Subwoofer
- Power Handling:
- Peak: 800 watts
- RMS: 200 watts
- Impedance: Single 4 ohms
- Carbon glass fiber reinforced injection molded polypropylene cone woofer
- Woven cloth reinforced radial urethane surround
- Air suspension excursion control system
- Designed to fit into small spaces under seat, behind seat or rear side cabin
- Double cone reinforced nodes
- Angled push terminals
- Fin-shaped basket: Channels airflow sideways instead of downward, improving performance and responsiveness
- Frequency response: 20-144 Hz
- Sensitivity: 89 dB
- 1-year SonicElectronix.com warranty
TS-SWX251 Enclosure Features:
- 10" Sealed Shallow Subwoofer Enclosure
- Pre-loaded with one Pioneer TS-SW251
- Thick 5/8" MDF construction
- Thin box for areas without a lot of extra space
- Spring post terminals accept up to 12 AWG speaker cable
- Dimensions: 5-7/8"D x 18-7/8"W x 11-15/16"H
Kenwood KAC-1502S Features:
- 2-Channel Class A/B Car Amplifier
- RMS Power Rating:
- 4 ohms: 60 watts x 2 chan.
- 2 ohms: 75 watts x 2 chan.
- Bridged, 4 ohms: 150 watts x 1 chan.
- Max power output: 175 watts x 2 chan.
- MOSFET switching power supply
- LED power indicator
- Speaker-level inputs
- Short circuit, DC offset, overload, and thermal protection circuitry
- Cast aluminum heat sink design
- RCA level inputs
- Screw terminals
- Fixed low-pass filter (80 Hz)
- CEA-2006 compliant amplifier
- Frequency response: 5-50,000 Hz
- Dimensions: 8-7/8"W x 2-3/16"H x 7-1/16"D
- 8-gauge power and ground leads recommended.
- 1-year Sonic Electronix warranty
Xscorpion EPAK8BL Features:
- 8 Gauge Power Amplifier Installation Kit
- Designed specifically for car audio systems up to 1000 watts
- Premium power and ground wire provides optimal power transfer
- Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
- Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
- Terminals are nickel-plated for excellent signal transfer
- AGU Fuse holder offers ideal protection for mid powered systems
- True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
Xscorpion EPAK8BL Includes:
- 16 ft. of 8 AWG blue power cable
- 3 ft. of 8 AWG platinum ground cable
- 15 ft. of 18 AWG blue remote turn-on wire
- 15 ft. of blue 2-channel RCA cable
- 15 ft. of clear speaker wire
- Platinum AGU in-line fuse holder
- Platinum AGU fuse
- Platinum ring terminals
- Platinum spade terminals
- Butt connectors
- Cable ties
- Split loom tubing
- Grommets
- Self tapping screws
|
Average Customer Rating is 5.0 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability | | 5.0 |
| Value | | 5.0 |
| Features | | 5.0 |
| Design | | 5.0 |
| Usability | | 5.0 |
| what's this? |
|
|
Most Helpful Customer Reviews:
|
Review by
Anthony from Colorado Springs, CO
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Installed in 2002 Silverado sounds great to much sometimes just thumps away only needed one box wow!
|