Expert Service 1-877-289-7664 [Hours]

Free eGift Card Promo

Clarion CMD6 Receiver with JBL Marine MPS1000 Subwoofer

Watertight Marine CD, MP3, WMA, AAC Receiver with USB Input and CeNET Control

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Stereo Features:

  • Marine AM/FM, CD, MP3, WMA, AAC player with Remote
  • iPod USB direct connectivity via your standard iPod-to-USB connection cable allows you to charge, control, and playback your iPod through the receiver and stereo system
  • Watertight flip-down face
  • Marine Certified for complete protection against a marine environment
  • HumiSeal Coated PCB
  • ASTM B117 (salt/fog Exposure) certified
  • ASTM D4329 (UV exposure) certified
  • Sealed stainless steel chassis
  • 2-Line high visibility dot-matrix LCD display
  • Wireless remote control included
  • Optional wired remote available (Clarion MW1)
  • Red button lighting
  • CEA-2006 compliant amplifier
  • Power Output:
    • Peak: 50 watts x 4 channels
    • RMS: 21 watts x 4 channels
  • MP3 ID3 Tag Display (Title/Artist/Album)
  • 1-year SonicElectronix.com warranty

Playback and Audio Features:

  • Playback of CD, CD-R, CD-RW, CD-DA MP3, WMA, and AAC
  • Tuner with 18FM/12AM presets
  • USB Digital media streaming capability
  • Parametric equalizer with preset tone curves
  • BBE MP Digital Sound processing to enhance your MP3/WMA playback
  • Fixed audio output

Expandability Options:

  • 3 Sets of 2V preamp outputs (front, rear and subwoofer)
  • SIRIUS Satellite Radio Ready: SIRIUS tuner required and sold separately. Optional Marine antenna also available and sold separately.
  • XM Satellite Radio Ready: Audiovox XM Direct 2 Connector Module and Adapter Cable required and sold separately
  • Bluetooth Ready: Clarion BLT370 required and sold separately
  • iPod Ready: Direct connection through USB
  • 2 Rear auxiliary inputs: Dual RCA audio inputs
  • Rear USB for connection to an iPod or other USB media devices
  • Wired wheel remote ready
  • CD Changer controls

Any iPods/iPhones released after May 22, 2009 have not been tested by the manufacturer and/or Sonic Electronix for compatibility. Therefore we do not guarantee compatibility in regards to, but not limited to: playback, video, charging, and response time.

Subwoofer Features:

  • 10" Amplified Marine Subwoofer
  • Power Handling:
    • RMS: 250 watts
  • Polypropylene cone woofer
  • Rubber surround
  • Fully protected from damage in storage areas and the recessed waterproof controls in front are easy to fine-tune
  • Pigtail hookup to seamlessly integrate the speaker into the boat's wiring harness
  • Input sensitivity:
    • Line-level: 100mV-6V
    • Speaker-level: 1V-3V
  • Phase Control: 0° to 180°
  • Bass boost: 0 to 7dB @ 50Hz
  • Mounting depth: 8"
  • Cutout Dimensions: 10-1/8"
  • 1" Grill height
  • Frequency response: 40-100Hz
  • Crossover frequency: 50 to 100Hz
  • Crossover slope: 12dB per octave
  • ISO-8846 Marine-compliant
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Amplified or Non-Amplified
This indicates if the subwoofer comes with an amplifier installed as one unit or Non-amplified which requires an external amp to power the subwoofer

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
150 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
300 watts
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
81.1 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
40 - 100 Hz
Warranty
Here you will find specific warranty information that this item qualifies for. Below are some of the most popular warranties found on the website: 1-Year Sonic Electronix - The item will be returned back to our company for processing and will either be replaced, repaired or exchanged. 1-Year Manufacturer's - The item will be returned back to the manufacturer and they will process the return and either repair or replace it. 90-Day Repair Only - Within 90 days the item can be sent back to our location for repair. No Warranty - This item does not come with any sort of warranty but one can be purchased separately from our website. If the warranty listed is different than any of the ones listed above, please visit the warranty page for specific details.
1-year SonicElectronix.com

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Items we think you might want
MPS1000 thumbnail
JBL MPS1000

• 300W Peak
• Polypropylene cone woofer
• Rubber surround
• Fully protected from damage in storage areas and the recessed waterproof controls in front are easy to fine-tune

Your Price $229.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

CMD6_MPS1000

Weight

23.00lbs

Internal SKU

cmd6_mps1000

Internal Product ID

38605

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Clarion CMD6 Receiver with JBL Marine MPS1000 Subwoofer