Expert Service 1-877-289-7664 [Hours]

1600W Kicker + Precision Power Complete Bass Package

2 Kicker 10CVR124 12" CompVR Series Subwoofers + Precision Power PPI S850.1D Amp + Kit + Sub Box

In Stock
|

List price $839.83

$429.99

with warranty

You Save: $409.84 (48.80%)

Order within 3 hrs 22 mins to ship 7/14

Arrives by Wednesday, July 16 to zip 20147

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Wed, July 16

Kicker and Precision Power Bundle

This Sonic Electronix Exclusive Bass package showcases a Precision Power PPI S850.1D amplifier along with a pair of 12" CompVR Series Kicker Subwoofers. This excellent bass package pushes 800 watts of clean, continuous RMS power. The Kicker Subwoofers each have a Dual 4 Ohm Voice Coil; meant to be wired in parallel/parallel, to a final impedance of 1 ohm. For more information regarding subwoofer wiring, please check out our Subwoofer Wiring Diagram.

These Kicker 10CVR124 12" CompVR series subwoofers require 800 watts of RMS power. The included Precision Power PPI S850.1D amplifier will compliment this required power by supplying a perfect match-up of certified RMS continuous power. This package also includes a complete 4 gauge amplifier kit, which is perfect to supply power to the amplifier. Also included will be a Dual 12" sealed subwoofer enclosure. This enclosure is made from durable MDF wood and comes pre-line with poly-fill for improved performance. With the Kicker subwoofers, Autotek amplifier, sealed enclosure, and The Belva BAK4 amplifier kit, this bass bundle is great for anyone looking to upgrade their vehicle's audio system

Kicker CVR124 (10CVR124)

400W 12" CompVR Series Dual 4 ohm Subwoofer
Quantity: 2

Subwoofer Features:

  • 12" Dual 4 Ohm CompVR (CVR) Subwoofer
  • Power Handling:
    • Peak: 800 watts
    • RMS: 400 watts
  • Impedance: Dual 4 Ohm
  • Injection molded SoloKon cone
  • Ribbed Santoprene surround
  • Double stitched surround for enhanced cone-to-surround strength
  • Extra strong adhesive and stitching prevents the cone from detaching from the surround
  • Spiralead tinsel lead technology weaves the tinsel leads into the spider
  • Progressive-roll polycotton spider
  • Super rigid cone and 360-degree back bracing eliminate distortion
  • Sturdy steel basket holds the subwoofer mounted firmly
  • Steel basket features perimeter venting around the dual voice coils
  • Large, high-mass pole piece for dissipating potentially damaging heat
  • Strong spring-loaded terminals
  • Newly re-designed 2010 basket structure
  • High-Temperature voice coil
  • Powerful rear magnet
  • Frequency response: 25-500 Hz
  • Sensitivity: 86.9 dB
  • Mounting depth: 6-1/4
  • Also found as: 10CVR12-4 ohm, CompVR122, CVR-124, CVR-12, CompVR 124, CompVR 12" 4 ohm, 2010 CVR124
  • Item is a part of Kicker ProFit Group
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
2011 Kicker Authorized Online Dealer and eBay Seller

Precision Power PPI S850.1D

850W RMS Sedona Series Class D Monoblock Amplifier
Quantity: 1

  • Sedona Series Monoblock Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 350 watts x 1 chan.
    • 2 ohms: 600 watts x 1 chan.
    • 1 ohms: 850 watts x 1 chan.
  • PWM MOSFET power supply
  • Variable Bass Boost (0, 6, 12 dB at 55 Hz)
  • IDI Intelligent Distress Indicator for thermal, short, and impedance protection
  • Dash mount remote gain control included
  • Brushed aluminum finish
  • Low pass and Subsonic crossover with active x-over function
  • Turn on/off delay
  • Single-channel monoblock operation
  • Tri Mode capable
  • High level inputs for connection from OEM speaker leads
  • Heavy duty aluminum alloy heatsink efficient heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Variable low-pass filter (40-220 Hz, 12 dB/octave)
  • Subsonic filter (10-50 Hz)
  • Frequency response: 10-220 Hz
  • Signal-to-noise ratio: 85dB
  • Damping factor: >200
  • Total harmonic distortion: 0.5%
  • Input sensitivity: 0.2V-5V
  • Dimensions: 13-1/2"L x 9-1/2"W x 2-3/8"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • 1-year Manufacturer's warranty

Belva BAK42

Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)
Quantity: 1

General Features:

  • Complete 4 Gauge 2-Channel Amplifier Installation Kit
  • Designed specifically for car audio systems up to 1000 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • In-line Mini-ANL Fuse holder with a 80 amp Mini-ANL fuse offers ideal protection for high powered systems
  • Also available as 4-Channel Kit
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Red 4 gauge power wire
  2. 3 ft. (.91 meters) Black 4 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. 20 ft. (6.1 meters) Speaker cable
  6. One In-line Mini-ANL Fuse Holder with a 80 amp Mini-ANL fuse
  7. One Black rubber firewall grommet
  8. One 4 Gauge red chrome plated ring terminals
  9. One 4 Gauge black chrome plated ring terminal
  10. Three 18 Gauge red Spade terminal
  11. Two 18 Gauge black Spade terminal
  12. One 18 Gauge red butt connector
  13. Ten 4" Black zip ties

Dual 12" 3/4 MDF Sealed Subwoofer Enclosure (Belva MDFD12)

Dual 12-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil (2.46 cu ft Airspace - 12SQB)
Quantity: 1

General Features:

  • Dual Sealed 12" Enclosure
  • Internal box volume: 2.46 cubic ft. total air space - 1.23 cubic ft. per chamber.
  • High Quality 3/4" MDF Construction
  • Durable black carpeting
  • Pre-lined with Poly-Fil
  • Seams are fully caulked for better efficiency
  • 2 Separate chambers allowing each subwoofer its own air space
  • Gold post terminals for clean and easy wiring access
  • Box Dimensions: 28-1/2"L x 14-1/4"D x 14-1/4"H
  • 30 Day return policy

Amplifier Power Specifications

RMS Power @ 4 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
163 watts x 1 channels
RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
325 watts x 1 channels
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
750 watts x 1 channels
Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage. Often times this maximum is achieved during a brief musical burst, such as a drum accent or low bass hit. Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. This is the peak power output for the amplifier's 5th channel.
1500 watts x 1 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

1500 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

750 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
1 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Not Bridgeable
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
<0.1%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

30 - 250 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
15 - 35 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
>95 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 10 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
80A x 1 
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

No

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
400 watts
Total RMS Power Handling
This is the total RMS power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
800 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
800 watts
Total Peak Power Handling
This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
1600 watts
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Santoprene Rubber
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
SoloKön
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
86.9 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
25 - 500 Hz

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Sealed
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
2
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Square/Rectangle
Height
The height of the item, measured from top to bottom, in inches.
14"
Width
The width of the item from left to right (side-to-side) measured in inches.
28-1/4"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
14"
Wood Thickness
The thickness of the wood the enclosure is made of, measured in inches.
3/4"
Number of Terminals
The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
2
Terminal Type
Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

Binding posts (banana clip ready)
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Black
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
89%
4 Star
11%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.9
Value
4.8
Features
4.7
Design
4.9
Usability
4.6

Subster

Fallbrook, Ca

Overall
Durability
Value
Features
Design
Usability

Incredible Buy

September 21, 2011

I was very cautious when i went to buy these subs with the package, but for the price, i couldn't find a better deal! i have heard many subs ranging from jl's to visionik, and these, (BY FAR) hit harder then any of them. the sound quality is good and this package shakes my entire car! i've owned them for about 3 days, but i wanted to write a review right away so people have something to base off of. Incredible package, i highly recommend them!

10 of 10 found this helpful

Help our customers find the most helpful reviews

Anthony

Robinson, TX

Overall
Durability
Value
Features
Design
Usability

Good Package

April 28, 2014

I installed these in a 2012 Chevy Cruze, and they are awesome. The subs sound great when they are working. I've had trouble with the amp overheating after 15-20 minutes of hard playing. Also, the bass knob hasn't worked correctly from day one. I need to contact Sonic Electronix about these issues. Overall, this is a good package.

0 of 0 found this helpful

Help our customers find the most helpful reviews

joe

port richey, FL

Overall
Durability
Value
Features
Design
Usability

LOUD AS... !!

March 21, 2014

Just had these installed in my 2007 Hyundai Entourage with its stock 13 speaker Infinity 660 wt system . The Kickers and Precision power amp just pound the crap outta my van . I only turn The Sony head unit up to 25 or so with amp control on half . This unit goes to 50 but that would blow my speakers lol . Nice deep bass too . My sister inlaw had 2 JL Audio and a 1200 wt Zapco in her durango but i think these hit almost as hard and her system was 2500$ lol . Thanks for the great deal Sonic ! I couldn't find this big of a deal anywhere else . The sub box was very well built also .

0 of 0 found this helpful

Help our customers find the most helpful reviews

Kyle

Scranton Pa

Overall
Durability
Value
Features
Design
Usability

Amazing

October 15, 2013

These are fantastic. i am a 16 year old boy, and would recommend these to any one. They hit HARD. Extremely impressed

0 of 0 found this helpful

Help our customers find the most helpful reviews

Lucas

Homer, IL

Overall
Durability
Value
Features
Design
Usability

Worth every penny

June 7, 2013

Though I never heard of precision power, the amp and subs do go well together and they hit HARD. Don't hesitate buying these. Kicker is one of the best brands out there and the amp powers them fine.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Shyam

laurel

Overall
Durability
Value
Features
Design
Usability

Kicker

May 26, 2012

The price for this is phenomenal, you cannot get a system which kicks harder for the price. Sub woofers are also good quality, something you would already expect from kicker.

0 of 0 found this helpful

Help our customers find the most helpful reviews

eugene

LOWELL, MA

Overall
Durability
Value
Features
Design
Usability

nice

March 10, 2012

Money well spent. I highly recommend this product and the price is of the hook. Killer bass if this is what you are looking for.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Kickerallday

Florida

Overall
Durability
Value
Features
Design
Usability

Best thing ever!

February 4, 2012

When I bought these i knew buying a package deal probably wasnt the best thing to do and i figured it would hit okay and sound alright, but I was so wrong. I got these installed only yesterday in my 03 jetta and I couldnt be happier! The 850.1 precision power amp was my biggest concern and I thought it wasnt going to supply enough power but once again I was wrong. Cant wait till these really break in. They hit super hard!

0 of 0 found this helpful

Help our customers find the most helpful reviews

hookups

lancaster, ca

Overall
Durability
Value
Features
Design
Usability

WOWWW!!!!1

January 9, 2012

Wow..... let me just say wow. this bundle was great had no issues insatalling everything and once i figured out the best wiring on the subs let me say wow!!! Very pleased with the kicker comps very satifsying. Was thinking original about getting a ported box but no need i can barely breath in the car when i have them beatting at full power. If your still learning like i was this is a for sure recommended kit!!! No complaints at all from me!!! : D

0 of 0 found this helpful

Help our customers find the most helpful reviews

Items we think you might want

10CVR124 thumbnail

Kicker CVR124 (10CVR124)

• 800W Peak
• 400W RMS
• Rigid SoloKon cone
• Double Stitched Surround
• Ribbed Santoprene Surround
• Spring-Loaded Terminals
• Spiralead Tinsel Leads

Your Price $119.95

S850.1D thumbnail

Precision Power PPI S850.1D

• RMS: 350W x 1 @ 4 ohms, 600W x 1 @ 2 ohms, 850W x 1 @ 1 ohm
• Total RMS Power: 850W
• Class D Circuitry
• Selectable Bass Boost: 0, +6, or +12 dB at 55 Hz
• High-Level Inputs
• Dimensions: 13-1/2"L x 9-1/2"W x 2-3/8"H

Your Price $119.95

Product Summary

Manufacturer

Model Number

2-10CVR124_S850.1D

Weight

78.50lbs

Internal SKU

2-10cvr124_s8501d

Internal Product ID

38788

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: 1600W Kicker + Precision Power Complete Bass Package