Expert Service 1-877-289-7664 [Hours]

1600W Kenwood + Autotek Bass Package

2 Kenwood KFC-W112S 12" KFC Series Subs + Autotek ATX1600.2 2-Channel Amp + Amp Kit + Enclosure

Discontinued
|

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Kenwood and Autotek Bass Bundle

This Sonic Electronix Exclusive Bass package showcases a Autotek ATX1600.2 amplifier along with a pair 12" KFC Series Kenwood Subwoofers. This excellent bass package pushes 400 watts of clean, continuous RMS power. The Kenwood Subwoofers each have a Single 8 Ohm Voice Coil; meant to be wired in parallel, to a final impedance of 4 Ohms at the Bridged impedance. For more information regarding subwoofer wiring, please check out our Subwoofer Wiring Diagram.

These Kenwood KFC-W112S 12" KFC series subwoofers require 400 watts of RMS power. The included Autotek ATX1600.2 amplifier will compliment this required power by supplying a perfect match-up of certified RMS continuous power. This package also includes a complete 4 gauge amplifier kit, which is perfect to supply power to the amplifier. Also included will be a dual 12" sealed enclosure, this enclosure will come with pre-line Poly-Fil and will be made with durable MDF wood. The sealed design will provide a tighter and quicker responsive bass. With the Kenwood subwoofers, Autotek amplifier, sealed enclosure, and Belva amplifier kit, this bass bundle is great for anyone looking to upgrade their vehicle's audio system

Kenwood KFC-W112S Features:

  • Pair of 12" Single 8-Ohm KFC Series Subwoofers
  • Power Handling:
    • Peak: 1600 watts total / 800 watts each
    • RMS: 400 watts total / 200 watts each
  • Impedance: Single 8-Ohm
  • Polypropylene injection-molded woofer cone
  • High-roll urethane surround
  • Silver-plated terminals
  • Steel frame basket
  • 2" Voice coil
  • 28.9 oz. ferrite magnet structure
  • Frequency response: 28-800 Hz
  • Sensitivity: 90 dB
  • Mounting depth: 5-9/16"
  • Cutout dimensions: 10-13/16"
  • 1-year SonicElectronix.com warranty

Autotek ATX1600.2 Features:

  • 2-Channel Class AB ATX Series Car Amplifier
  • MAXX Power Rating:
    • 4 ohms: 400 watts x 2 chan.
    • 2 ohms: 800 watts x 2 chan.
    • Bridged, 4 ohms: 1600 watts x 1 chan.
  • Pulse Width Modulated MOSFET power supply
  • LED power green and protect red indicators
  • Bass Boost (0-12 dB @ 45 Hz)
  • Soft Start Turn-on
  • 2 or Mono channel operation
  • Speaker-level (high-level) inputs with signal sensing for automatic turn-on
  • Preamp RCA outputs to daisy chain multiple amps
  • 4-Way System Protection circuitry (DC, thermal, overload, and speaker short protection)
  • Flat panel heatsink design for extreme heat dissipation
  • Nickel-Plated RCA level inputs
  • Nickel-Plated screw terminals
  • Variable High-Pass Filter (60-1200 Hz)
  • Variable Low-Pass Filter (30-250 Hz)
  • Subsonic Filter (60-1200 Hz)
  • Signal-to-Noise Ratio: >95 dB
  • Damping Factor: >200
  • THD (Total Harmonic Distortion): <0.05%
  • Channel Separation: >70 dB
  • Variable Input Level Control: 0.2V-5V
  • Fuse Rating: 2 x 20 Amp
  • Frequency Response: 30-45,000 Hz
  • Dimensions: 12-5/8"L x 9-3/4"W x 2-3/16"H
  • 4-gauge power and ground wiring is required for installation.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Belva BAK42 Features:

  • Complete 4 Gauge 2-Channel Amplifier Installation Kit
  • Designed specifically for car audio systems up to 1000 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • In-line Mini-ANL Fuse holder with a 80 amp Mini-ANL fuse offers ideal protection for high powered systems
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Red 4 gauge power wire
  2. 3 ft. (.91 meters) Black 4 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. 20 ft. (6.1 meters) Speaker cable
  6. One In-line Mini-ANL Fuse Holder with a 80 amp Mini-ANL fuse
  7. One Black rubber firewall grommet
  8. One 4 Gauge red chrome plated ring terminals
  9. One 4 Gauge black chrome plated ring terminal
  10. Three 18 Gauge red Spade terminal
  11. Two 18 Gauge black Spade terminal
  12. One 18 Gauge red butt connector
  13. Ten 4" Black zip ties

MDFD12 Enclosure Features:

  • Dual Sealed 12" Enclosure
  • Internal box volume: 2.46 cubic ft. total air space - 1.23 cubic ft. per chamber.
  • High Quality 3/4" MDF Construction
  • Durable black carpeting
  • Pre-lined with Poly-Fil
  • Seams are fully caulked for better efficiency
  • 2 Separate chambers allowing each subwoofer its own air space
  • Gold post terminals for clean and easy wiring access
  • Box Dimensions: 28-1/2"L x 14-1/4"D x 14-1/4"H
  • 30 Day return policy

Amplifier Power Specifications

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

Not specified by manufacturer
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

Not specified by manufacturer
RMS Power @ 1 ohm

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 1 ohm, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

Not specified by manufacturer
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

Not specified by manufacturer
Peak Power Output
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison.

1600 watts x 1 channels

Amplifier Specifications

Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

AB
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
2
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

1600 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

Not specified by manufacturer
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
Not specified by manufacturer
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Yes
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
High-pass (HP)
Full (AP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

60 - 1200 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

30 - 350 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
60 - 1200 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
>95 dB
Channel Separation
Also referred to as crosstalk. The amount of interference on one stereo channel caused by the leaking of the other stereo channel. The higher the rating in decibels (dB), the better the Channel Separation.
>70 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 12 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
No
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
2A x 20 
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

No

Subwoofer Specifications

Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
12"
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Single
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
8 ohms
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
200 watts
Total RMS Power Handling
This is the total RMS power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total RMS power handling for all of the subs combined.

The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend giving your subwoofer(s) 75% - 90% of the recommended RMS rating.
400 watts
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
800 watts
Total Peak Power Handling
This is the Total Peak Power handling of all the subwoofers included in the package or enclosure.

If the loaded enclosure or amplifier and subwoofer package includes more than a single subwoofer, then this is the total peak power handling for all of the subs combined.

Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements.
1600 watts
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Urethane
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
90 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
28 - 800 Hz
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
7.7 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Enclosure Specifications

Box Type
Represents the style of the enclosure. Be sure to purchase the appropriate enclosure type and internal volume that will be compatible with your subwoofer's recommendation.

Sealed - Sealed boxes are those that have no holes or vents in it. The only hole in a sealed box is where the subwoofer is installed. Smaller sealed boxes require more power than a larger sealed box. They provide a tight, accurate bass, while the larger sealed enclosures provide a "boomier" and louder bass.

Ported / Vented - Ported/Vented Enclosures provide an even boomier, louder bass, but less accurate then a small, sealed box. Ported enclosures typically require more airspace per sub and also less power output from an amplifier to perform correctly.

Bandpass - Bandpass enclosures make subwoofers perform efficiently, but loose. The bass is not as "boomy" as a ported enclosure nor as punchy as a sealed enclosure. Bandpass enclosures work well with lower to mid-level subwoofers.
Sealed
Number of Subs/Speakers
This value represents the number of speakers or subwoofers that the enclosure accommodates.
2
Box Style/Shape
The box style or shape refers to the actual shape of the box. Square and rectangular boxes are straight-edged boxes on all sides, whereas hatchback and truck style enclosures feature an angled front or back design that allows for installation in places short on depth such as single cab pickup trucks. You can also use such enclosures in hatchback cars or other vehicles where space is a premium. Tube and cylinder shaped boxes were made popular by Bazooka and are a great option for those looking for a nice amount of bass without sacrificing lots of space. They may even fit in locations that slim truck boxes cannot fit in. If the enclosure is vehicle specific, we encourage you to read the product description to find out which vehicles the enclosure is made for.
Square/Rectangle
Height
The height of the item, measured from top to bottom, in inches.
14"
Width
The width of the item from left to right (side-to-side) measured in inches.
28-1/4"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
14"
Wood Thickness
The thickness of the wood the enclosure is made of, measured in inches.
3/4"
Number of Terminals
The number of terminals the enclosure has. Each terminal represents 1 positive and 1 negative.
2
Terminal Type
Spring clip terminals work best with bare wire connections with small-gauge speaker wire, or pin-type connectors.

Binding post terminals are a sturdier, more versatile type of speaker terminal. Because binding post terminals are are threaded, you can tighten them down against the wire or connector for a tight, clean connection. The most popular style of binding post terminals is known as a "5-way binding post". This type can accept bare wire, or any of the common speaker wire connectors. Binding posts with the option to be used with banana clips are even more versatile

Spring posts are a hybrid of the two. Instead of using a thread and "screwing" them tight, they use a spring to allow the wire to fit and tighten against the terminal.

Binding posts (banana clip ready)
Box Exterior Color
The color of the enclosure's exterior/outer finish.
Black
Box Finish
The material used on the outside of the box. Most boxes are carpeted to prevent exterior scratches; however vinyl is popular as it can often be color-matched to a near exact look of your leather factory interior.
Carpet

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
71%
4 Star
29%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.7
Value
5.0
Features
4.6
Design
4.7
Usability
4.8

Tara

San Francisco, CA

Overall
Durability
Value
Features
Design
Usability

love it!

December 11, 2011

I would definitely recommend this. I got it for sale on Black Friday, the total was about $230 (shipping included). Before I saw this deal on Sonic Electronix, a salesman at a local audio shop was trying to sell me 2 kenwood 10's plus an amp for $550. With this bass package i got a WAY better deal and better sound! Definitely recommending it to my friends :)

6 of 6 found this helpful

Help our customers find the most helpful reviews

Armin Salic 817

Fort Worth, TX

Overall
Durability
Value
Features
Design
Usability

These subwoofers are amazing!

April 12, 2012

These subwoofers are amazing. I have it hooked up to my '08 Malibu with the stock radio and it still sounds real loud. I had to bridge them because at first they were weak, but after I was done bridging (5 mins), I made them twice as loud as before!

4 of 4 found this helpful

Help our customers find the most helpful reviews

kevin

Pagosa Springs Colorado

Overall
Durability
Value
Features
Design
Usability

Great System!

February 22, 2012

These are the best sounding subs you'll ever get with that low of a price! Totally worth it! Only problems I've had was hooking them up was a little tricky and the cab in my truck is so small that if i don't roll down the windows they don't work to their full potential!

2 of 2 found this helpful

Help our customers find the most helpful reviews

That guy

Atlanta Georgia

Overall
Durability
Value
Features
Design
Usability

AMAZING SUBS FOR THE PRICE

January 19, 2012

I was able to put these in my self and they were a great christmas present. These subs hit harder then all my friend's subs. This was an A+ find.

2 of 2 found this helpful

Help our customers find the most helpful reviews

Nick

Atlanta, Georgia

Overall
Durability
Value
Features
Design
Usability

Great Deal. Bangs my car.

January 19, 2012

Really good deal here. Everything is super loud and a great price for it. I've already told some of my friends about this deal. Really glad I got this package.

2 of 2 found this helpful

Help our customers find the most helpful reviews

the Duke

conway, AR

Overall
Durability
Value
Features
Design
Usability

awesome

January 17, 2012

They sound amazing and a very good buy for less than $300. I have a little 2010 altima sport and it shakes the whole car. Definitely worth it.

2 of 2 found this helpful

Help our customers find the most helpful reviews

david

gainesville, FL

Overall
Durability
Value
Features
Design
Usability

Great Value

January 10, 2012

This package comes with everything you will need to install the amp and sub. The amp kit is amazing, the sub box is great. I only wish the subs werent both 8 ohm so i didnt have to drill inside the box to connect the two subs in parallel but I guess it has its upside to it because theres 1 less wire to hook up to the amp and sticking out of the enclosure. This was my first time soldering and hooking up an amp and sub in my car and it still wasnt that difficult to do. For the average DIY it can be done in a couple of hours (took me about 7 :). Still havent tuned the amp but it still sounds GREAT, barely have the volume up to max and my whole car is shaking inside. I didnt put the polyfil inside cuz i forgot to and i can also do it later, but the subs still sound great. 400 Watts of RMS is PLENTY for the average joe. Great deal, great subs.

2 of 2 found this helpful

Help our customers find the most helpful reviews

SYED

Virginia

Overall
Durability
Value
Features
Design
Usability

Subwoofer and amp

February 24, 2014

I have bought this bundle two years ago, and it is still going strong. I have compared the Subs and Amp to another models out there, it beat them all. I love this bundle and will keep it for more longer. Great price!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Dan

South Jersey

Overall
Durability
Value
Features
Design
Usability

Best deal for the money and quality

December 2, 2012

When looking around for amplifiers and subwoofers with enclosures the prices were insane. Some stores would charge upwards of $200 dollars for amplifiers that couldn't do much work. This package was way worth the money and the products alone are amazing. it's an easy set up and it hits really hard.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Bryan

Ocala, Fl

Overall
Durability
Value
Features
Design
Usability

Great deal for the money!!!

October 29, 2012

I purchased this system because i was on a bugget. They slam pretty good. But if you get a chance get rid of the autotek amp. I had to send mine back the first time. All in all great deal for the money.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Big worm

roxboro nc

Overall
Durability
Value
Features
Design
Usability

good as fudge

June 20, 2012

Hit hard... sounds good... all that needs to be said.

0 of 0 found this helpful

Help our customers find the most helpful reviews

justin

ashland, MA

Overall
Durability
Value
Features
Design
Usability

subs are good, chords arent

June 11, 2012

This is a great sub i have in my 2011 honda civic, and a great deal, however the chords it comes with only go up to 1000 watts, and it is a 1600 watt sub, so you need to buy new cords with proper power output for it to work to full potential. I didn't and now i am stuck uninstalling and re installing this package, but if you do that then this is a great subwoofer, it bumps.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Aubree

Lubbock, TX

Overall
Durability
Value
Features
Design
Usability

Love it!

June 4, 2012

I ordered this set and got it put in this weekend and I already love them! Tight system and great choice of subs and amp!

0 of 0 found this helpful

Help our customers find the most helpful reviews

uoyoma

phoenix az

Overall
Durability
Value
Features
Design
Usability

Great Deal and Sound

May 30, 2012

I drive almost 60 miles a day from work to my house, and I constantly have these things blaring. set up was simple, I had never installed anything involving car audio. It took all of a couple hours. you really have to mess with the amp to get it tuned to what you really want it to sound. I have had these subs for up to half a year now and I still dont have any issues with them. I did get a new amp and a new head unit and that made a WORLD of difference. but for the standard car audio setup these are nothing but perfect. Would highly recommend for anyone who is just wanting to add some bass to their car.

0 of 0 found this helpful

Help our customers find the most helpful reviews

D

Wisconsin

Overall
Durability
Value
Features
Design
Usability

Great value

May 21, 2012

I bought these for Christmas, and all I can say is Wow! For 270 bucks this is a great deal. I have the amp on half power and my head unit on half volume and it flexes the roof of my explorer and rattles just about everything. If you are unsure whether to buy this or not, you definitely should get it!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Spencer

Lincoln, NE

Overall
Durability
Value
Features
Design
Usability

BEST SUBS EVER FOR PRICE!!!

April 28, 2012

This subwoofer package is the best deal ever for your money! Even though shipping was a little spendy, it came in the mail in 4 days, take into consideration though that this subwoofer package is around 75 lbs. It hits so hard, I love it! I got it installed with a lifetime warranty and couldn't be happier! Thank you Sonic.

0 of 0 found this helpful

Help our customers find the most helpful reviews

luke

Conway, AR

Overall
Durability
Value
Features
Design
Usability

these are legit

April 24, 2012

i bought these because i was looking for more bass in my car and was impressed immediately when i heard them. they hit so hard and for the price its awesome definitely two thumbs up

0 of 0 found this helpful

Help our customers find the most helpful reviews

Devindra

New Port Richey, FL

Overall
Durability
Value
Features
Design
Usability

Awsome

December 26, 2011

It's an awsome kit, the bass is nice and clean and very deep. Def a bang for your buck! Best gift I ever got myself.

0 of 0 found this helpful

Help our customers find the most helpful reviews

KING

Austin Tx

Overall
Durability
Value
Features
Design
Usability

Good stuff!

November 30, 2011

Great deal and the bass is off da chain. Would recommend.

0 of 0 found this helpful

Help our customers find the most helpful reviews

The Rosk

Goshen, CT

Overall
Durability
Value
Features
Design
Usability

Awsome Deal!

October 26, 2011

I was searching the internet for the best deals for a good sound system for my 98 Explorer without spending a ton of money. Well this right here is the best i can find. They sound amazing and you can't go wrong with anything here! Sonic Electronix is the BEST!

0 of 0 found this helpful

Help our customers find the most helpful reviews

Items we think you might want

KFC-W112S thumbnail

Kenwood KFC-W112S

• 800W Peak
• 200W RMS
• Polypropylene Woofer Cone
• Urethane Surround
• Steel Frame Basket

Your Price $59.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

2-KFC-W112S_ATX1600.2

Weight

66.00lbs

Internal SKU

2-kfcw112s_atx16002

Internal Product ID

39293

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: 1600W Kenwood + Autotek Bass Package