Garage
Shop

2000W Kenwood Subwoofer + Autotek Bass Bundle

Kenwood KFC-W3013PS 12" Performance Series Subwoofer + Autotek ATA1200.2 Amplifier + Amplifier Kit

Kenwood
Shop all Kenwood
EXCLUSIVE
highlight-star-icon

10" Single 4 Ohm KFC Series Subwoofer • 300W RMS • 2-Channel Class AB ATA Series Car Amplifier • MOSFET Power Supply • Variable Bass Boost • Variable Low-Pass Filters • 8 Gauge Amp Kit

Learn more about the kfcw3016ps_ata12002

We apologize

This item has been discontinued

Description


Kenwood brand icon

Authorized dealer

Kenwood and Autotek Bundle

This Sonic Electronix Exclusive Bass package showcases a Autotek ATA1200.2 Amplifier along with a 12" Performance series Kenwood subwoofer. This excellent bass package pushes 400 watts of clean, continuous RMS power. The Kenwood subwoofer has a Single 4 Ohm Voice Coil; meant to be wired directly to the amplifier, to a final impedance of 4 Ohms at the bridged impedance. For more information regarding subwoofer wiring, please check out our Subwoofer Wiring Diagram.

This Kenwood KFC-W3016PS Performance series subwoofer requires 400 watts of RMS power. The included Autotek ATA1200.2 amplifier will compliment this required power by supplying a perfect match-up of certified RMS continuous power. The included 8 gauge amplifier kit is perfect to supply power to the amplifier. With the Kenwood subwoofer, Autotek amplifier, and Belva BAK82 amplifier kit, this bass bundle is great for anyone looking to upgrade their vehicle's audio system

Kenwood KFC-W3016PS Features:
  • 12" Single 4 ohm KFC Series Car Subwoofer
  • Power Handling:
    • Peak: 2000 watts
    • RMS: 400 watts
  • Polypropylene cone woofer
  • Urethane foam surround
  • Linear spider design for increased excursion
  • Spring post terminals
  • Double stacked magnet
  • Dual ventilation system
  • Frequency response: 34-300 Hz
  • Sensitivity: 85 dB
  • 1-year Sonic Electronix warranty
Autotek ATX1000.2 Features:
  • 2-Channel Class AB ATX Series Car Amplifier
  • MAXX Power Rating:
    • 4 ohms: 250 watts x 2 chan.
    • 2 ohms: 500 watts x 2 chan.
    • Bridged, 4 ohms: 1000 watts x 1 chan.
  • Pulse Width Modulated MOSFET power supply
  • LED power green and protect red indicators
  • Bass Boost (0-12 dB @ 45 Hz)
  • Soft Start Turn-on
  • 2 or Mono channel operation
  • Speaker-level (high-level) inputs
  • Preamp RCA outputs to daisy chain multiple amps
  • 4-Way System Protection circuitry (DC, thermal, overload, and speaker short protection)
  • Flat panel heatsink design for extreme heat dissipation
  • Nickel-Plated RCA level inputs
  • Nickel-Plated screw terminals
  • Variable High-Pass Filter (60-1200 Hz)
  • Variable Low-Pass Filter (30-250 Hz)
  • Subsonic Filter (60-1200 Hz)
  • Signal-to-Noise Ratio: >95 dB
  • Damping Factor: >200
  • THD (Total Harmonic Distortion): <0.05%
  • Channel Separation: >70 dB
  • Variable Input Level Control: 0.2V-5V
  • Fuse Rating: 2 x 15 Amp
  • Frequency Response: 30-45,000 Hz
  • Dimensions: 9-7/8"L x 9-3/4"W x 2-3/16"H
  • 4-gauge power and ground wiring is required for installation.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Xscorpion EPAK8BL Features:
  • 8 Gauge Power Amplifier Installation Kit
  • Designed specifically for car audio systems up to 1000 watts
  • Premium power and ground wire provides optimal power transfer
  • Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
  • Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
  • Terminals are nickel-plated for excellent signal transfer
  • AGU Fuse holder offers ideal protection for mid powered systems
  • True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Xscorpion EPAK8BL Includes:
  1. 16 ft. of 8 AWG blue power cable
  2. 3 ft. of 8 AWG platinum ground cable
  3. 15 ft. of 18 AWG blue remote turn-on wire
  4. 15 ft. of blue 2-channel RCA cable
  5. 15 ft. of clear speaker wire
  6. Platinum AGU in-line fuse holder
  7. Platinum AGU fuse
  8. Platinum ring terminals
  9. Platinum spade terminals
  10. Butt connectors
  11. Cable ties
  12. Split loom tubing
  13. Grommets
  14. Self tapping screws

Specifications & Details


Amplifier Power Specifications
RMS Power @ 4 ohms
150 watts x 2 channel
RMS Power @ 2 ohms
300 watts x 2 channel
Bridged RMS Power
600 watts x 1 channel
Peak Power Output
1200 watts x 1 channel
Amplifier Specifications
Amplifier Class
A/B
Number of Channels
2-Channel
Total Peak Power Output
1200 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
.05%
Speaker Level Inputs
Yes
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
High-Pass Crossover Frequency
60 - 1200 Hz
Low-Pass Crossover Frequency
30 - 250 Hz
Signal-to-Noise Ratio
>90 dB
Bass Boost
0 - 9 dB
Remote bass/level controller
No
Fuse Rating
30A x 2 
Subwoofer Specifications
Number of Subwoofers
1
Subwoofer Size
12"
Voice Coil(s)
Single
Impedance (Per Voice Coil)
4 ohms
RMS Power Handling
400 watts
Total RMS Power Handling
400 watts
Peak Power Handling
1200 watts
Total Peak Power Handling
1200 watts
Woofer Surround
Urethane
Woofer Composition
Polypropylene
Minimum Sealed Box Volume
1.25 cubic feet
Maximum Sealed Box Volume
1.75 cubic feet
Minimum Ported Box Volume
2.0 cubic feet
Maximum Ported Box Volume
2.5 cubic feet
Sensitivity
85 dB
Frequency Response
34 - 300 Hz
Xmax (millimeters)
15.1 mm
Top-Mount Depth (Mounting Depth)
6-1/4"
Cutout Diameter
11"
Recommended Enclosure Type
Ported / Vented
Sealed
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Item Details


Manufacturer:

Model Number:

KFC-W3016PS_ATA1200.2.2

Weight:

20.57lbs

Internal SKU:

kfcw3016ps_ata12002

Internal Product ID:

39366

Customer Ratings & Reviews



5 star
71%
4 star
23%
3 star
6%
2 star
0%
1 star
1%



Durability
4.6
Value
4.7
Features
4.6
Design
4.6
Usability
4.7

Customer Reviews

Sort by:

Loading...

BAK 82

The following review is for BAK82, which is a part of the bundle you are viewing.

Nice package, quality wire but could more end connectors for the larger wire.

By Sam on June 19, 2014

159

found this helpful.

Good product

The following review is for BAK82, which is a part of the bundle you are viewing.

It's exactly what you need for your car amp installation. I bought this kit with Kenwood KAC-1502S amp for 75 bucks. Good deal from Sonic Electronix.

By Collins on January 6, 2014

147

found this helpful.

Don't know what the other guy is talking about.

The following review is for BAK82, which is a part of the bundle you are viewing.

This kit was awesome and included with my package that I bought. In comparison to others for the same price, there is simply not a comparison and the other review is just wrong on so many levels I felt compelled to write this.

The reality is there are a lot of real shoddy amp kits and wire as a whole being used in car audio in terms of cheap amp kits that have over-insulating wires and fake gauge ratings, huge amounts of aluminum, lousy RCA cables, fuse holders and other accessories. BUT and a BIG BUT, this kit excels in those areas where others fall flat on their face. I have bought a few inexpensive 8 gauge kits in my day and XScorpion, Raptor, Install Bay and others haven't even given me the 8 gauge of wire that I paid for, and in some cases gave me wire that heated up to a dangerous level due to the actual make up of the wire.

I also literally laughed when I see that the other reviewer was intending to use spade terminals to connect his amp power and ground wire... It is for the SPEAKER wire knucklehead :-). I am an installer and the smaller accessories work just fine when you use them correctly. Most amps will still work with them when used with the speaker wire. Of course one can be used for the remote wire connection to the amp and the other end with the butt connector being used to connect to the stereo. The funny thing is, if you do not need them, who cares? It is like ordering this kit for a compact car or single cab pickup. You will not use all of the power wire for these applications, so do you complain that the manufacturer gave you extra wire? That just made me laugh.

Now, onto the other accessories. The AFS fuse and holder that are included are so far superior to others in this price range and the amount of copper (albeit CCA) is much better than others in the price range. Lastly, the RCAs included are awesome for the price. I cannot find ANYTHING to complain about here for $21.99.

All in all, you will not get a better value for the money.

By Double Down on August 14, 2012

137

found this helpful.

Great kit for the cost

The following review is for BAK82, which is a part of the bundle you are viewing.

Very nice kit for $18.
Wire seems adequately thick. Good quality fuse (not AGU) and fuse holder. RCA's feel durable. Decent assortment of accessories. All together a solid budget kit IMO.

By n2audio on September 24, 2014

142

found this helpful.

Good product for the price

The following review is for BAK82, which is a part of the bundle you are viewing.

Good wiring package, good quality fuse holder and wires, I would like more connectors on it and maybe some tube for the power wire, but overall is a good kit.

By Alfredo on October 29, 2014

137

found this helpful.

Good Purchase

The following review is for BAK82, which is a part of the bundle you are viewing.

I used this kit to install a 2 channel Boss amp. The quality of the pieces in this kit is five stars, but I'm giving it 4 because it is my belief that to do a clean install you need (4) 8 gauge terminals (one at the batt, one at the amp, one at ground, one at the amp), not just two. I had to spend an extra six bucks at Orchard for the extra terminals, but since the cost of the kit here at Sonic was only $20 at the time, it was still a good deal.

By Jumbo Dumbo on December 19, 2013

129

found this helpful.

Good kit

The following review is for BAK82, which is a part of the bundle you are viewing.

Good kit for basic setups. Using it right now in my mothers system powering a simple 12. Could handle more if needed.

Pros: Handles power, Wires are HQ, More copper than rubber, Wires are good length, Fuse is HQ, Comes with lots of ties and rubbers.

Cons: None

I would recommend this kit to anyone who has a simple system. All around good kit.

By Mitch on January 31, 2014

136

found this helpful.

Great wiring kit

The following review is for BAK82, which is a part of the bundle you are viewing.

works great on my MB Quart 2x100 watt amp.

By Eric on November 29, 2013

127

found this helpful.

Good Kit

The following review is for BAK82, which is a part of the bundle you are viewing.

Great kit for the price. the price is good. Long wires.

By Joshua on December 8, 2013

128

found this helpful.

Belva BAK82

The following review is for BAK82, which is a part of the bundle you are viewing.

Worked very well for the money, great value for my system! Only thing that kept me from giving this 5 stars across the board is the design of the fuse holder and how you have to change/connect the fuse, minimal complaint.

By Dwight on April 9, 2014

124

found this helpful.

Add-ons


Similar Products

Best selling similar products

NVX QBUS8P

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

(6)

$129.99

Pioneer TS-WX1210AM

• 350 watts Single 12" Subwoofer Enclosure
• 4 ohms Impedance
• Spring-loaded Terminal Posts
• Enclosure Dimensions: 10" TD x 12-1/2" BD x 19-3/4" W x 14-7/8" H

(2)

$179.99

MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier

• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting

(153)

$279.95

Belva BPKG210v2 Dual 10" Subwoofer and Amp Package with Box and Wiring Kit

• Works with both Factory and Aftermarket Audio Systems
• Dual 10" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit

(27)

$214.99

MTX F-150EX-09A

• 250W Single 10" Sealed Subwoofer Enclosure with Built-In Amplifier
• 10" Terminator Subwoofer
• Built-In 250W Terminator Amplifier
• Sealed enclosure with aviation grade carpet finish
• Enclosure Dimensions: 36-1/3" L x 7-1/4" H x 14-1/8" D

$579.95

Related Searches


KFC-W3016PS_ATA1200.2.2 small

Item added to your cart.

Price: $137.59

Essential add-ons
20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

$89.99

$59.99

Add to cart
Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$236.95

$149.95

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

$9.99

$7.99

Add to cart
Five Piece Installer Panel Removal Tool Kit

Installer's Panel Removal Installation Tool Kit for Car Stereo, Speakers and Car Audio Installs

$18.99

$11.99

Add to cart
SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

$207.99

$199.99

Add to cart
Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

$461.99

$451.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon