1000W 10" Orion + Jensen Bass Bundle

This Sonic Electronix Exclusive Bass package showcases a Jensen Power 900.1 Amplifier along with one 10" XTR PRO series Orion subwoofer. This excellent bass package pushes 450 watts of clean, continuous RMS power. The Orion subwoofer has a Dual 4 ohm voice coil; meant to be wired directly to the amplifier, to a final impedance of 2 Ohms. For more information regarding subwoofer wiring, please check out our Subwoofer Wiring Diagram.

This Orion XTRPRO104 XTR PRO series subwoofer requires 500 watts of RMS power. The included Jensen Power 900.1 amplifier will compliment this required power by supplying a near perfect match-up of certified RMS continuous power. This package also includes a 4 gauge amplifier kit which is perfect to supply power to the amplifier. With the Pioneer subwoofer, Jensen amplifier, and db Link amplifier kit, this bass bundle is great for anyone looking to upgrade their vehicle's audio system

• 10" XTR PRO Dual 4 ohm Subwoofer
• Power Handling:
  • Peak: 1000 watts
  • RMS: 500 watts
• Polypropylene dust cap and paper cone is moisture and UV resistant
• Nitrile-butadiene rubber surround enhances the linear excursion
• Symmetrical tuned long-throw surround
• Dual interlaced conex spider
• Custom cast aluminum frame
• Custom trim ring
• Tinsel leads stitched and looped across spider
• Venting in voice coil former is part of the enhanced voice coil cooling system
• Advanced forced convection cooling system
• Tri-cooling system
• Copper wound voice coil on aluminum former
• Sensitivity: 82 dB
• Two large 48 oz. double stacked ceramic magnets (96 oz. total)
• 1-year Sonic Electronix warranty

• Monoblock Power Series Class AB Car Amplifier
• RMS Power Rating:
  • 4 ohms: 300 watts x 1 chan.
  • 2 ohms: 450 watts x 1 chan.
• Max power output: 900 watts x 1 chan.
• Pulse Width Modulated MOSFET power supply
• Remote input level control with 5m cable
• LED power (green) and standby/fault (red) indicators
• Variable bass EQ (0-12 dB @ 45 Hz)
• Soft Start Turn-on
• Monoblock operation
• Preamp RCA outputs to daisy chain multiple amps
• 3-Way System Protection circuitry (thermal, DC-Offset, and speaker short protection)
• Heavy duty extruded heatsink for extreme heat dissipation
• High current bi-polar output transistors
• Optimized class AB design minimizes distortion and reduces idle current
• Chrome-plated RCA level inputs
• Chrome-plated screw terminals
• Variable Low-Pass Filter (40-300 Hz, 12 dB/octave)
• Subsonic Filter (10-40 Hz @ 12 dB)
• Signal-to-Noise Ratio: >100 dB
• Frequency Response: 5-300 Hz
• Variable Input Level: 400mV - 5V
• THD (Total Harmonic Distortion): 0.02%
• Fuse Rating: 2 x 30 amps
• Dimensions: 9"D x 15-3/4"W x 2-1/2"H
• 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

• 10" Single Sealed Subwoofer Enclosure
• Durable MDF enclosure for car subwoofers
• Covered in a black carpet
• Pre-lined with Poly-Fil
• Gold-plated speakers terminals
• Banana-clip ready
• Subwoofer mounting depth: 11"
• Subwoofer cutout diameter: 9-1/8"
• Box volume: 0.7 cubic feet (per chamber)
• Total box volume: 0.7 cubic feet
• Dimensions: 12-1/2"D x 12-1/2"W x 12-1/2"H

• Complete 4 Gauge Amplifier Installation Kit
• Designed specifically for car audio systems up to 1600 watts
• Premium power and ground wire provides optimal power transfer
• Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
• Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
• Includes everything that you need to install a single amplifier
• Premium power and ground cable
• 1-year Manufacturer's warranty

1. 17 ft. of Blue power cable
2. 3 ft. of Black ground cable
3. 17 ft. of Clear/blue RCA cable
4. 25 ft. of Speaker wire
5. 17 ft. of Remote turn-on wire
6. In-line AGU fuse holder
7. 60 Amp AGU fuse
8. Installation hardware