Expert Service 1-877-289-7664 [Hours]

Memorial Day Clearance

JL Audio MX770-CCX-CG-WH

7-3/4" MX Series Marine Speakers w/ White Grille

In Stock. Only 1 Left!

List price $319.95

You Save: $50.00 (15.63%)


with warranty

+ FREE Shipping in US 48

Order within 2 hrs 6 mins to ship today

Arrives by Thursday, May 28 to zip 07095

Add an Extended Warranty

SquareTrade Product Warranty
Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Thu, May 28

Get FAST answers from customers ASK a Question See questions answers

JL Audio MX Series

The JL Audio MX Series speakers are engineered for the best quality sound when your on the water. These certified oversized marine speakers give you greater cone area, resulting in higher output and better bass response than your typical 6-1/2" speaker. Although these speakers require a slightly larger mounting hole, they are well worth the small modification for the amount of sound they can produce. Even when cruising across the water you will have no problem cranking these up and listening to your jams with little distortion and excellent response that no other marine speakers can match. Get JL quality sound with the 2011 MX series speakers!

Speaker Features:

  • 7-3/4" MX Series 2-way Marine Speakers
  • Power Handling:
    • Peak: 300 watts per pair / 150 watts each
    • RMS: 150 watts per pair / 75 watts each
    • Recommended Minimum Power: 25 - 150 watts RMS each
  • Injection-molded mica-filled polypropylene cone
  • Precisely engineered dust cap for smooth upper-end response
  • Synthetic optimized rubber surround for marine duty
  • UV-Resistant polymer speaker baskets
  • 0.75" Silk dome tweeter that is formulated to withstand UV and salt-spray exposure
  • Ferrofluid-cooled and damped tweeter for improved response and thermal power handling
  • Natural woofer rolloff with 2nd order high-pass filter on tweeter
  • Built-in tweeter protection prevents tweeter failures due to abuse
  • Optimized for cockpit-mounting or infinite baffle
  • Long excursion design for enhanced output and bass extension
  • 4 ohms impedance
  • Synthetic fiber spider with progressive roll design
  • Neodymium magnet structure
  • Permanent grille design ensures optimal high-frequency performance with no loss of woofer radiating area
  • Top-mount depth: 3-3/16"
  • System frequency response: 45-25,000Hz
  • Also found as: SKU# 052820, 029346
  • 1-year warranty

Priced Per Pair

Speaker Specifications

Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
7-3/4" (7.7")
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Soft Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Mica Injected Polypropylene (MIPP)
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Synthetic Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
150 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
75 watts
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
90 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
45 - 25000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
6-1/4 x 6-1/4 
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches, required to contain the speaker.
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Number of Speakers
This is the number of speaker that is included in the package. Each purchase will result in receiving the number of speakers indicated here. Please note that some items will have multiple woofers in the same enclosure. For sets of component speakers, this number will refer to the number of sets of speakers (For example, 2 would indicate the purchase includes 2 woofers and 2 tweeters).

Please refer to the product image and description for further details about the speaker.


Specials with this Item

Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
4 Star
3 Star
2 Star
1 Star

Average Attribution Rating


Moss Point, Mississippi

Love them

July 28, 2012

I put two pair of these JL speakers in my Boston Whaler with a JL M600/6 amp. It sounds awesome!! I had to cut just a small amount out to enlarge the hole from the 6.5" speakers that were already there. It amounted to about 1/4" more of a hole than the existing. The bass was much better than the 6.5" speakers but I think I will still put a subwoofer in at some point.

3 of 6 found this helpful

Was this review helpful to you?


Miami, Fl

JL Audo Speakers

August 22, 2012

I would recommend purchasing from Sonic, the experience and website was very easy and forthcoming. My boat has never sounded better with the speakers I purchased from Sonic, and at a savings that I couldn't get locally. I will never buy any other speakers for my boat that don't say JL Audio on it.

3 of 7 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

23 ft. Belva Speaker Wire (CCA)

23 ft 16 Gauge Speaker Wire (CCA)

Your Price $12.99

50 ft. NVX 16 Gauge Speaker Wire (OFC)

50 ft. of True Spec 16 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

Your Price $29.99

75 ft NVX 16 Gauge Speaker Wire (OFC)

75 ft. of True Spec 16 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

Your Price $39.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary


Model Number






Internal SKU


Internal Product ID


Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JL Audio MX770-CCX-CG-WH