Expert Service 1-877-289-7664 [Hours]

JBL JRX-115 and CROWN XLS1000

Complete Pro P.A. System with World Class Products

We apologize

This item has been discontinued

The Perfect Performance Package!

JBL speakers are the industry professionals choice for pro sound reinforcement and nothing pushes JBL speakers better than a rock solid Crown amplifier. Coupled with the Alesis Multimix 8 mixer and four ATM-410 microphones you have everything you need to equip your venue, school, or house of worship with some serious sound. Including Free Mic Stands!

Crown XLS 1000 Features:
  • XLS High Performance, Lightweight Class D Amplifier
  • RMS Power Rating:
    • 8 ohms: 215 watts x 2 chan.
    • 4 ohms: 350 watts x 2 chan.
    • 2 ohm: 550 watts x 2 chan.
    • Bridged, 8 ohms: 700 watts x 1 chan.
    • Bridged, 4 ohms: 1100 watts x 1 chan.
  • Integrated PureBand™ Crossover System for better performance and control
  • Peakx Limiters provide maximum output while protecting your speakers
  • XLR, 1/4", RCA inputs provide outstanding flexibility
  • Efficient forced-air fans prevent excessive thermal buildup
  • Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
  • Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel
  • 1-year Manufacturer's warranty
Specifications:
  • Sensitivity (for full rated power at 4 ohms): 1.4 Vrms
  • Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB
  • Signal-to-Noise Ratio Rated as dBr to full rated 8Ω power output (A-Weighted):
    • XLS1000: > 97 dB
    • XLS1500, XLS2000, XLS2500: > 103 dB
  • Damping Factor (8 ohm) - 10 Hz to 400 Hz: > 200
  • Crosstalk (below rated 8Ω power):
    • At 1kHz: > 85dB
    • At 20kHz: >55dB
  • Input Impedance (nominal): 20 kΩ balanced, 10 kΩ unbalanced
  • Load Impedance:
    • 2 to 8 Ω per channel in Stereo
    • 4 to 8 Ω in Bridge Mono
  • AC Line Voltage and Frequency Configurations Available (± 10%):
    • 120 VAC 60 Hz
    • 100 VAC 50/60 Hz
    • 220 and 240 VAC 50 Hz
  • Ventilation: Flow-through ventilation from front to back
  • Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation
  • Air Volume Requirements (per minute per unit): 80.15 ft³ (2.27 m³)
  • Integrated Processing:
    • PureBand™ Crossover System
    • Crossover Filter: Linkwitz-Riley 24dB per Octave
    • Crossover Frequency Range: 50 HZ - 3 kHz
    • Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channels LPF), HighPass (both channels HPF), Bridge (LPF or HPF)
    • Peakx™ limiters: Channel independent clip limiter designed to provide maximum output while protecting your loudspeakers
  • Input/Output:
    • Input Connectors: XLR (one per channel), 1/4-Inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to distribute signal to additional amplifiers
    • Output Connectors: Two 4-Pole Speakon® Output Connectors accept 2-pole or 4-pole Speakon® connectors. The top Speakon connector is wired for both channels so it can be used for bridgemono wiring or for stereo wiring of two speakers to a single Speakon connector
    • One pair of back-panel binding posts per channel; accepts banana plugs or bare wire. (European models do not accept banana plugs.)
  • Construction:
    • XLS1000/XLS1500: 8.12-Inch (20.62cm) depth
    • XLS2000/XLS2500: 10.35-Inch (26.29cm) depth
  • Dimensions:
    • EIA Standard 19-inch (48.3-cm) rack mount width (EIA RS-310-B), 3.5-inch (8.9-cm) height.
    • XLS 1000/1500: 7.7-inch (19.6-cm) depth.
    • XLS 2000/2500: 10.7-inch (27.2-cm) depth.
  • Net Weight, Shipping Weight:
    • XLS1000: 8.6 lb (3.9kg), 13.6 lb (6.2 kg)
    • XLS1500: 8.6 lb (3.9kg), 13.6 lb (6.2 kg)
    • XLS2000: 10.75 lb (4.9kg), 15.8 lb (7.1 kg)
    • XLS2500: 10.75 lb (4.9kg), 15.8 lb (7.1 kg)
JBL JRX115 Features
  • 15" 2-Way Trapezoidal Loudspeaker
  • Power Handling
    • Peak: 1000 watts
    • RMS: 250 watts
  • 15" Low frequency driver with a 2-1/2" diameter edgewound ribbon voice coils
  • Ferro-fluid cooled compression driver with titanium diaphragm
  • Advanced network topology crossover design
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire
  • Progressive Transition high frequency waveguide
  • Rugged, acoustically superior 3/4" MDF enclosure
  • SonicGuard protects the high frequency driver from excess power without interrupting the performance
  • Non-resonant, all-steel handles
  • 18-Gauge perforated steel grille
  • Dual-angle pole-mount socket
  • Neutrik Speakon NL-4 input connectors
  • Frequency Range: 38-16,000 Hz
  • Frequency Response: 50-12,500 Hz
  • Max SPL: 128 dB
  • Sensitivity: 98 dB
  • Nominal Impedance: 8 ohms
  • Nominal Dispersion: 90° x 50°
  • Crossover Frequency: 1600 Hz
  • Dimensions: 17"D x 18-1/8"W x 27-1/2"H
  • 1-year Manufacturer's warranty
Alesis Multimix Features
  • 8-Channel DJ Effects Mixer
  • Mic, line, and guitar-level inputs
  • 16-Bit, 44.1/48 kHz stereo USB output for easy recording and playback from your computer
  • XLR inputs with gain trim, switchable high-pass filters, and 48V phantom power
  • 1/4" Line-Level inputs for instruments and high-impedance guitar input for direct-connecting guitars
  • Powerful EQ: three-band with sweepable parametric mids on channels 1 and 2, three-band on 3 and 4, two-band on 5 – 8
  • Built-in DSP effects with footswitch bypass control and Aux buss for external processing
  • Multicolor LED metering for visual level feedback
  • Main and headphone outputs with independent level controls
  • Class compliant, plug-and-play USB for Mac and PC interface without installing drivers
  • Includes Cubase LE software
  • Dimensions: 10-3/4"D x 10-1/4"W x 3-1/4"H
  • 1-year Manufacturer's warranty
ATM410 Features:
  • Tailored for smooth, natural vocal reproduction
  • Durable performance for professional applications
  • Superior anti-shock engineering for low handling noise
  • Excellent off-axis rejection for minimum feedback
  • Hi-ENERGY® neodymium magnet for improved output and transient response
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
  • Quiet-Flex™ stand clamp provides silent, flexible microphone positioning
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Rugged, all-metal design and construction for years of trouble-free use
  • Dimensions: 6-11/16"L x 2-1/8"W
  • 1-year Manufacturer's warranty
Technical Specifications:
  • Element: Dynamic
  • Polar Pattern: Cardioid
  • Frequency Response: 90-16,000 Hz
  • Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa
  • Impedance: 300 ohms
  • Weight: 8.2 oz (233 g)
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0

Product Summary

Manufacturer

Model Number

JRX-115 and XLS1000

Weight

190.12lbs

Internal SKU

jrx115_xls1000

Internal Product ID

39854

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JBL JRX-115 and CROWN XLS1000