Expert Service 1-877-289-7664 [Hours]

NVX XFLOC2

80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver

In Stock
|

List price $19.99

You Save: $7.00 (35.02%)

Thanks , You Pay:

$12.99

with warranty

Order within 59 hrs 11 mins to ship 5/31

Arrives by Tuesday, June 7 to zip 20147

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Tue, June 7

Get FAST answers from customers ASK a Question See questions answers

NVX Store

Add An Amplifier To Your Stereo System!

The NVX XFLOC2 Premium line-out converter is the perfect solution for adding an aftermarket amplifier to your stock or aftermarket stereo system. The XFLOC2 uses the signal from your stock stereo or amplifier by tapping into the stock speaker wire and converting it to a 2-channel RCA signal output. This allows you to add an amp simply and effectively. It features a 6:1 Step down with an adjustable gain output, DC amplifier turn-on trigger and a 80 watt total maximum input (40 watts per channel). The XFLOC2 uses a digital noise filter to reduce static and other noises that sometimes occur when adding a line out converter. The end result is a high quality line out converter with super low distortion, and as with all NVX products the engineering and build quality is second-to-none.

Product Features:

  • 2-channel Premium adjustable line output converter
  • Digital Noise Filter + Line Driver
  • 6:1 Step Down With Adjustable Output
  • 80w Maximum Input Total (40w Per Channel)
  • DC Amplifier Turn On Trigger
  • Super Low Distortion
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Line-Out Converter Specifications

Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
2
Maximum Power Input
This is the maximum amount of power (measured in watts) that the unit is designed to handle. Exceeding this amount can void warranties and damage the unit.
80 watts

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
60%
4 Star
20%
3 Star
13%
2 Star
7%
1 Star
0%

Average Attribution Rating

Durability
4.1
Value
4.7
Features
4.5
Design
4.3
Usability
4.3
Nicholas

Castle Pines, CO

Overall
Durability
Value
Features
Design
Usability
So easy to use

August 19, 2014

I used this LOC to connect a RCA cable to my stock head unit. The diagram that comes with it is so great. It has a remote wire that you can connect it to your amp for when the loc/head unit the amp powers on. I love this and i have had no lose of power to rear speakers as well. I highly recommend this when you are adding an amp to your stock stereo.

64 of 75 found this helpful

Was this review helpful to you?

Anthony

Minot, ND

Overall
Durability
Value
Features
Design
Usability
Great LOC

February 27, 2014

Great instructions, very detailed. Works perfectly. Highly recommend to anyone integrating a factory system.

63 of 73 found this helpful

Was this review helpful to you?

ew4hybrid

Naples,Fl

Overall
Durability
Value
Features
Design
Usability
Its been working perfect !!

January 15, 2014

The NVX XFLOC2 its a great product, it works great, easy to install, also has adjustments for high and low and for the price, nothing bad to say.

62 of 74 found this helpful

Was this review helpful to you?

Juan munoz

South gate ca

Overall
Durability
Value
Features
Design
Usability
Nvx xfloc2

March 7, 2014

I love this product very easy to use simple love the feature of the remote shut off for the amp

57 of 71 found this helpful

Was this review helpful to you?

Andy

Flint, mi

Overall
Durability
Value
Features
Design
Usability
Eh

April 11, 2014

One of the level adjustment knobs broke fell out. I had to take the case off to adjust the output level. The sound quality is alright.

55 of 69 found this helpful

Was this review helpful to you?

rotornaut

Denver co

Overall
Durability
Value
Features
Design
Usability
Good purchase

July 16, 2013

This was a cheap and easy solution for adding a sub to a stock system. No need for an expensive head just to get the amp RCA's and trigger. made my sub pound over speaker level input on kenwood amp.

53 of 66 found this helpful

Was this review helpful to you?

Matthew

Safford AZ, AZ

Overall
Durability
Value
Features
Design
Usability
Great value

June 10, 2015

Worked great sounds great has built in noise filter have it running a planet audio 3000 watt and a MOFO 12 bumps good

30 of 34 found this helpful

Was this review helpful to you?

Alienx2053

rochester, NY

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Good for the price

May 24, 2015

This is my second converter. I definitely like this one better than the last one I had bought several years ago. However, I forgot how much I dislike line input converters. They are good for keeping stock stereo. However, if you can its better to put in an aftermarket stereo. Aftermarket stereo has much better sound control as well as quality.
I consider this converter to be a temporary fix for me. My sub is running - Yay! But I will be upgrading the stereo in the next month or two.

28 of 36 found this helpful

Was this review helpful to you?

Coco

Van nuys

Overall
Durability
Value
Features
Design
Usability
Great value

July 27, 2015

Just the best items I could get for my cars, Im getting more for shure

19 of 25 found this helpful

Was this review helpful to you?

Alex

San Diego, ca

Overall
Durability
Value
Features
Design
Usability
good product

June 23, 2015

i decided to try out this brand and after using it i liked the quality of this product.

17 of 22 found this helpful

Was this review helpful to you?

Ritty975

Indianapolis, IN.

Overall
Durability
Value
Features
Design
Usability
Works Great

July 2, 2015

Best one I ever used and easy to hook up

18 of 25 found this helpful

Was this review helpful to you?

stephen

Spokane , WA

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
nvx xfloc2

November 8, 2015

Works really good. like the line driver part of it.

3 of 4 found this helpful

Was this review helpful to you?

Matthew

NJ

Overall
Durability
Value
Features
Design
Usability
Can't go wrong for the price.

March 19, 2016

While the price is pretty nice, I did notice a feedback loop after the install. Only happens every now and again, and when it does, I found that if I crank the volume, then drop it back down, it goes away. But otherwise a decent product for factory-aftermarket integration.

0 of 0 found this helpful

Was this review helpful to you?

william

Wichita Falls, TX

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Good Product

February 22, 2016

Have have this over a year now with no issues. Good buy.

0 of 0 found this helpful

Was this review helpful to you?

Jamie

vancouver, WA

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Not for me

October 26, 2015

I attempted to use this with an audiobahn amp. It worked, however I had an issue with a feedback loop or something. When turning off my car, the subwoofer would start making noise and getting louder as if it was going to blow. I noticed if I cut the gain on the amp way down and played with the gain on the XFLOC2, I could keep the issue at bay. Although, I could still ever so slightly hear the humming noise. I checked and re-grounded without success. I removed this device and simply went straight speaker level to the amp. The issue is no longer present. Anyone want a practically new NVX XFLOC2? lol.

1 of 2 found this helpful

Was this review helpful to you?

Browse 9 questions and 35 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
NVX is the best brand for stereo installation.
Thomas S on Apr 1, 2016
I needed a converter for a factory head unit.
Dan D on Oct 30, 2015
Price was right and unit looks well made.
Kelvin W on Jan 18, 2016
need
Christopher M on Oct 12, 2015
I don't want to use the trigger feature. Can I just leave the trigger input disconnected?
A shopper on Aug 4, 2015
Best Answer: Yes, you can leave the remote wire disconnected and it will work just fine.
Reply · Report · Chris S on Aug 4, 2015
· Add Answer · I Have This Question Too (0)
Does this product come with installation Instructions?
A shopper on Mar 20, 2015
Best Answer: It did come with instructions and if you have any 12v electrical experience it will be a quick easy install. Still working perfectly in my sentra.
Reply · Report · JoAnn C on Mar 21, 2015
· Add Answer · I Have This Question Too (0)
How would I wire this into a car that has a factory amplifier. I have a 2007 Explorer Eddie Bauer. I would like to be able to add a mono amp and some 12''s?
therealest on Mar 20, 2016
Best Answer: If you have a factory amplifier you can still use this. All you need to do is tap into a set of speakers like your rear door speakers. Match the +'s and the -'s. The other wires aren't really necessary. If the factory speakers aren't marked take a 9 volt battery and hook a wire to the + and a wire to the -. Now touch the wires to the speaker terminals. If the speaker cone moves in you are backwards. If the cone moves out then whichever wire is + on the battery is touching the + of the speaker. Now one last thing. If your factory amp is more powerful than 40w per channel then this is not a good solution because the maximum input power is 40w per channel on this. You would need a converter capable of more power input.
Reply · Report · Craig H on Mar 21, 2016
· Add Answer · I Have This Question Too (0)
Can you run both inputs on a mono 60watt RMS factory amp channel? As if the mono channel operated as (stereo) both rear speaker channel inputs. Or would I have to use only 1 set of input wires with such configuration?
Billy on Apr 7, 2016
Best Answer: To be safe, I would run one input from the LOC to a mono amp which means you would get one output(red or black RCA) active. If your goal is to have two active RCA's out, put a Y splitter on the one active RCA making it two. That way, the LOC is being used per designed and you should not have any problems with it.
Reply · Report · Kelvin W on Apr 7, 2016
· Add Answer · I Have This Question Too (0)
Does this have the soft turn on feature ,where it eliminates turn-on pop in aftermarket amplifiers or incorporates a 2-3 seconds delay before triggering the output to prevent turn-on noise like the NVX XTRI1?
A shopper on Sep 14, 2015
Best Answer: I dont have noise in mine when it turns on . But to answer your question , the amplifier is where the soft turn on is located . This wire just powers up with radio like a remote on and and triggers the amp to turn on . Once the amp is triggered if the amp has soft turn on it will do so . But if amp doesnt have soft turn on it might pop . I dont know of any amps without soft turn on .
Reply · Report · Chris A on Sep 14, 2015
· Add Answer · I Have This Question Too (0)
How do I install this?
A shopper on Mar 20, 2015
Best Answer: You need to connect the gray wire + to the rear right + output of your head unit or the right rear speaker +. then connect the gray/black wire - to the right rear - output of your head unit or right rear speaker -. wire the left side the same way white is + and white/black is -. the yellow is constant +12v you connect it to yellow constant of your head unit or if you have an amplifier connect it to the + wire of the amp. the black wire is ground just simply ground it. the blue wire needs to be connected to the remote wire on the head unit or amplifier. the brown wires are only used if you have no sound. if you have no sound on both channels ground the brown wires. I hope this helps.
Reply · Report · conway h on Mar 22, 2015
· Add Answer · I Have This Question Too (0)
How do I tune the gain on a line output converter without clipping the signal?
Jovanny R on Aug 10, 2014
Best Answer: No problem . I just leave them alone because at the factory where they are made they match them at 2.0v per channel and it takes a high dollar tool like i posted to get them perfectly matched . Also you may check with some local installation shops and see if they have the equipment to do it and it may save you some money , but if not i would buy steve meades tool and do it myself .
Reply · Report · Jovanny R on Aug 11, 2014
· Add Answer · I Have This Question Too (0)
what is the spec for the output line (ohms/volts) ?
R S on Sep 14, 2014
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

XFLOC2

UPC

818060010606

Weight

0.40lbs

Internal SKU

xfloc2

Internal Product ID

40540

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: NVX XFLOC2