200W RMS 10" WXv2 Series Single 4-Ohm Subwoofer
• Sensitivity: 86.06 dB
• Mounting depth: 4.80 "
• Polypropylene woofer cone material
•Foam woofer surround
• Proprietary dynamic motor analysis (DMA) improves motor behavior
• Elevated frame cooling delivers cold air above the top plate to the voice coil
• Recommended Power Range: 75 - 200 watts
• Sensitivity: 86.06 dB
• Mounting depth: 4.80 "
• Polypropylene woofer cone material
•Foam woofer surround
• Proprietary dynamic motor analysis (DMA) improves motor behavior
• Elevated frame cooling delivers cold air above the top plate to the voice coil
• Recommended Power Range: 75 - 200 watts
The WXv2 offers true value through its solid performance, proper JL Audio build quality and reasonable price. The WXv2 is an ideal subwoofer driver for modest power applications where the existing audio system simply needs some proper subwoofer bass. The driver is able to achieve this bass by optimizing its motor, polypropylene cone and foam woofer surround, providing a respectable one-way linear excursion of 10 mm. The driver features excellent suspension linearity and a DMA-optimized motor system to keep distortion low. JL Audio's patented Elevated Frame Cooling design is also on-board for enhanced power handling and reliability. When listening to the strong bass from this driver, its hard to believe that the WXv2 is JL Audio's least expensive subwoofer driver.
Although the WXv2 Subwoofer can be driven with as little as 75 Watts, for best audio performance it is recommended to run an amplifier capable of between 175 - 200 Watts of continuous power per driver, like the JL Audio JX250/1D or JL Audio XD200/2v2. In addition, these subwoofers are optimized to operate in either a ported or sealed enclosure, needing only 0.625 cubic feet of air space in a sealed box and 1.00 cubic feet in a ported/vented enclosure. (Specific dimensions and figures can be found in the user manual, linked further below.)
JL Audio's patented Elevated Frame Cooling design delivers cool air into the heart of the subwoofer in ways no other manufacture's driver can. Purpose-engineered slots located directly above the top-plate stream air to the voice coil. In addition, the upper surface of the top-plate is directly exposed to this air flow, whereas on a conventional design it is isolated from this flow by the lower flange of the frame. This technology not only increases thermal power handling, but also sound quality by minimizing dynamic parameter shifts and power compression. In plain English, this driver keeps itself cool so you can play your system longer, safer and without having to worry about frying the motor.
DMA is JL Audio’s proprietary Dynamic Motor Analysis system and is aimed at improving dynamic motor behavior. As a result of DMA optimization, WXv2 motors remain linear in motor force over an extreme range of excursion and also maintain a highly stable fixed magnetic field in the gap over a wide power range. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass. Its main catalyst is the driver's Ultra-long Voice Coil, that allows extreme linear excursion, phenomenal power handling and control, control, control.
JL Model Comparison | |||||||||
---|---|---|---|---|---|---|---|---|---|
Model | RMS Power | Cone Material | Surround Material | Sensitivity (dB) | Frequency Response | Xmax (mm | Terminals | Made In America | |
W7 Series | 500-1500 Watts | Polypropylene | Foam Overroll | 82.7 - 86.3 | 15-250 Hz | 19-32 | Push Terminals | ||
W6 Series | 600 Watts | Polypropylene | Rubber | 82.7 - 85.4 | 20-200 Hz | 19 | Push Terminals | ||
W3 Series | 150-600 Watts | Polypropylene | Rubber | 80.5-87.90 | 20-250 Hz | 8.89-15.5 | Push Terminals | ||
W1 Series | 150-300 Watts | Polypropylene | Rubber | 83.9-86.1 | 22-200 | 8-11 | Push Terminals | ||
W0 Series | 300-500 Watts | Polypropylene | Foam | 84-88.20 | 20-250 Hz | 11.4-12.7 | Push Terminals | ||
WX Series | 200 Watts | Polypropylene | Foam | 86-87.17 | 22-250 Hz | 10 | Spade Terminals |
This item is currently not eligible for our low price guarantee. This may be due to supply constraints, manufacturer restrictions, or another reason. We're always here to help you get the best price possible so give us a call or email today. Our experts will do their best to build the system that works for you within the rules.
Internal Product ID:
41262
Great Entry Level Sub
I bought this sub after having 2 no name shallow mount 12s in a sealed box with a no name "4000" watt max amp, and this one 10 in a ported truck box getting 200 watts rms was close to as loud if not just as loud and sounded better than those two 12s. This is a great entry level subwoofer definitely recommend it. Your not gonna shake cars next to you but for 1 10" subwoofer it's pretty impressive
34
found this helpful.wx v2 review
I have 1 10" wx v2. This is my first 10" sub I've ever bought. I love 15's, but I bought a '04 Element. I wanted 2 keep the versatility of it and not give up a lotta room. I made a awesome custom box for the sub .64 cu. ft. and I'm only running 200w. I'm soo impressed.! It hits sooo hard. I love this sub. Jl rocks!
32
found this helpful.cheap single voice coil sub with superior sound
JL has been a reputable sub designer for years and will be for the future.. this sub in a sealed custom enclosure gave my subtle system some boost of bass i was looking for.
30
found this helpful.Great Sub
I bought one a year ago and ordered another. Great sound and won't break the bank.
30
found this helpful.Great entry level sub !
I have two of these subs in a custom ported box running off my old carver 250 watts RMS amplifier and they hit hard. Sure they aren't as loud as lets say a JL w3 but they are less than half the price. I am very happy with these subs, they shake everything in my car with a nice clean sound and very low power so its easy on your cars charging system. Also these subs can take a pounding, I've had mine for over a year now and i use them hard everyday and i have never had any problems with them at all. I definitely recommend these for entry level buyers who just want to upgrade their factory stereo's bass.
30
found this helpful.Great entry level subwoofer.
I owned JL audio 10wxv2 in a single Q logic box, pushed by a punch45 classic, its hit hard for a 10 and produced exceptional deep bass in a single cab full size chevy truck.
10
found this helpful.Better Replacement
I had a sub go bad - it's an older model that is no longer made. This 10WXv2-4 is the next item up that is most similar. It has definitely produced the sound I was missing for awhile
5
found this helpful.Best selling similar products