Cerwin-Vega and RE Audio Complete Bass Bundle
Shopping for an amplifier and subwoofer can be daunting at times. Which sub should I get? What amplifier is best for this subwoofer? What else do I need? All these questions can pretty much drive you nuts when looking to add some bass to your car audio system. Here at Sonic Electronix our dedicated specialist have taken the time to create a high performing bass bundle, giving you a tremendous amount of bass and best of all doing all the annoying work for you. A better car audio system is just a click away.
This Sonic Electronix Exclusive Bass Bundle showcases a RE Audio XT-800.2V3 amplifier along with a pair of 12" VEGA series, Cerwin-Vega subwoofers. This excellent bass package pushes 500 watts of clean, continuous RMS power. The Cerwin-Vega subwoofers each have a Dual 4 Ohm Voice Coil; meant to be wired together in series/parallel, to a final impedance of 4 Ohms at the bridged impedance. For more information regarding subwoofer wiring, please check out our Subwoofer Wiring Diagram.
These Cerwin-Vega VEGA124.2 12" VEGA series subwoofers require 500 watts of RMS power. The included RE Audio XT-800.2V3 amplifier will compliment this required power by supplying a perfect match-up of certified RMS continuous power. This package also includes a 4 gauge amplifier kit which is perfect to supply power to the amplifier. Also included will be a dual 12" sealed enclosure, this enclosure will come with pre-line Poly-Fil and will be made with durable MDF wood. The sealed design will provide a tighter and quicker responsive bass. With the Cerwin-Vega subwoofers, Cadence amplifier, sealed enclosure, and Elite Audio amplifier kit, this bass bundle is great for anyone looking to upgrade their vehicle's audio system.
Cerwin-Vega VEGA124.2
12" Dual 4 ohm VEGA Series Car Subwoofer
Quantity: 2
- Pair of 12" VEGA Series Dual 4 Ohm Subwoofers
- Power Handling:
- Peak: 1000 watts total / 500 watts each
- RMS: 500 watts total / 250 watts each
- Impedance: Dual 4 ohm
- Composite polypropylene cone design provides the perfect weight to strength ratio & excellent durability
- Red rubber surround allows high amounts of excursion
- Radial contact convex domes geometrical design minimizes cone flex to reduce distortion
- Rolled aluminum former for superior thermal capabilities and increased power handling
- Linear rolled spider provides unmatched cone assembly control at all volume levels
- Nickel-Plated pushpin terminals provide low-resistance connection & corrosion resistance
- 2" Dual 2 ohm high-grade temperature aluminum voice coil
- Cross-flow window framed venting reduces VC temperatures for increase power handling
- Forged alloy yoke for superior magnetic field retention
- Sensitivity: 84.2 dB
- Mounting Depth: 6-1/4"
- Cutout Diameter: 11"
- 1-year Manufacturer's warranty
RE Audio XT-800.2V3
1000W, XT Series Class DE 2-Channel Amplifier
Quantity: 1
- XT V3 Series 2-Channel Class DE Car Amplifier
- RMS Power Rating:
- 4 ohms: 100 watts x 2 chan.
- 2 ohms: 200 watts x 2 chan.
- Bridged, 4 ohms: 400 watts x 1 chan.
- Dynamic (Max) power output: 1000 watts
- High speed digital stereo amplifier
- Elevated Efficiency Platform guarantees the abundance of power, without a heavy drain on the vehicles charging system
- Remote bass level input (remote level control sold separately)
- Pulse Width Modulated MOSFET power supply
- LED power (green) and protect (red) indicators
- Variable Bass Boost (0 to +12 dB bass boost at 45 Hz)
- Screw terminal barrier strip speaker connector accepts 8-18 AWG speaker wire
- Soft start turn-on technology
- 2/1 channel operation
- 1 RCA Pair of preamp RCA outputs to daisy chain multiple amps
- 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
- Heavy duty aluminum alloy heatsink for excellent heat dissipation
- Convention cooling system
- Nickel-plated RCA level inputs
- Nickel-plated screw terminals
- Maximum Input Signal: 6V
- Maximum sensitivity: 200 mV
- Fully adjustable butterworth high and low pass crossover filters
- Variable high-pass filter (40-1,000 Hz, 12 dB/octave)
- Variable low-pass filter (40-250 Hz, 24 dB/octave)
- Subsonic filter (15-40 Hz, 24 dB/octave)
- Average Efficiency:
- Damping factor: 300 @ 4 ohm
- Output Regulation: 0.12dB @ 4 ohms
- Signal-to-Noise Ratio: 110 dB
- Frequency response: 5-50,000 Hz
- Dimensions: 9-3/4"L x 10"W x 1-7/8"H
- 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
- Also Found As: RE Audio, US Amps, XT8002V3, XT-8002V3, XT800 2V3, XT-800.2V2
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
Elite Audio EA-KIT4
4 Gauge Complete Pro Series Amplifier Installation Kit
Quantity: 1
- 4 Gauge Complete Pro Series Amplifier Installation Kit
- Designed specifically for car audio systems up to 2000 watts
- Premium power and ground wire provides optimal power transfer
- Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
- Includes 2-channel RCA interconnect cable for the audio signal connection from the receiver to the amplifier
- RCA Interconnects are made with twisted-shielding technology for noise reduction
- Terminals are nickel-plated for excellent signal transfer
- Mini ANL Fuse holder offers ideal protection for high powered systems
- 17 ft. of 4 gauge orange power cable
- 3 ft. of 4 gauge black ground cable
- 17 ft. of remote turn-on wire
- 17 ft. of twisted pair shielded RCA cable
- 17 ft. of 12 gauge speaker wire
- Nickel Plated In-line Mini ANL fuseholder
- 60 Amp mini ANL fuse
- 2 x 4 gauge ring terminals
- 6 ft. of 4 gauge split loom tubing
- 2 x 14-16 gauge spade terminals
- 10 x 6" cable ties
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
12SQB MDF Enclosure
Dual 12" Sealed Subwoofer Enclosure
Quantity: 1
- Internal box volume: (2) separated 1.21 cubic feet chambers.
- High Quality 3/4" MDF Construction
- Holds 2 12" subwoofers
- Seams are fully caulked for better efficiency
- Durable black carpeting
- Separated middle allowing each subwoofer its own air space
- Gold post terminals for clean and easy wiring access
- Dimensions: 14-1/8"D x 28-1/8"W x 14-1/4"H
- 30 Day return policy
20 oz of Polyester Fiber Fill
Polyfil Stuffing for Subwoofer Enclosure Box
Quantity: 1
- 20 oz of Polyester Fiber-fill for sub boxes
- Adds better bass to your system by making your sub "think" it is in a larger enclosure...get more from your small space!
- Made with newer, state-of-the-art processes that offer a very durable batt with little or no fiber migration
- Works great in smaller enclosures
- Adds better bass to your system by making your sub think it is in a larger enclosure
|
Average Customer Rating is 5.0 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability | | 5.0 |
| Value | | 5.0 |
| Features | | 4.8 |
| Design | | 5.0 |
| Usability | | 5.0 |
| what's this? |
|
|
Most Helpful Customer Reviews:
|
Review by
Chandler from Newnan, GA
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
These subs will really slam!!! I have them bridged at 4 ohms and they will knock in my 2001 Dodge Dakota! I have the amp screwed to the top of the sub woofer box and I will play my subs for an hour and the amp will barley get warm, but yet it provide LOTS of power to the subs! This combo is definitely a great value and the quality is incredible. It is hard hitting, yet at the same time doesnt overpower your speakers. JUST BUY IT.
|
|
Review by
Spanky from Ft Wayne,In
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I just bought this package deal and I'm glad I did!!! Great set-up from Sonic Electronis.....The only thing I don't like about it is the amp! It's a good amp (RE Audio = Cadence) but I'm more of a mono amp guy. I have it bridged just like the diagram says (400watts RMS) but the amp gets HOT quick! I think I'm going to try to hook them up to the Precision Power mono amp and see how that goes? Overall rating....9.5 out of a 10....mostly because of the amp! The power matching is great with the subs/amp I just feel it will sound better (hit harder) with another amp! Keep in mind this is a whole system that is under 1,000 RMS....so if your looking for that "glass breaker" system....this isn't it! But I am impressed with the sound quality and would buy this all over again!!!!
|
|
Review by
Curt from St.Louis
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
They send you everything you need in the package! I had everything hooked up at a installation shop and this system hits real, real hard. It shook my mirror of windshield, so I had to get some super glue to secure it. lol wow! The amp and the subs work very good together. I have a lot of people asking me what I have. I can turn it up to about 42 - 46 on my radio and still sound clear and loud with people hearing me coming way down the block. Really hope that you try this out. By the way, I got my order fast and everything was in there and it worked perfect!
|
|
Review by
Adam from chattanooga tn
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I had this kit professionally installed last week and it really slams! I have a little 2005 Suzuki Aerio and the whole car, mirrors, everything shakes. You can feel the bass in your chest for sure! I have it bridged at 4 Ohms. Make sure when you put the subs in the sealed box to hook them up bridged. look at the wiring diagram, for the price, it slams! I might upgrade in a few years or so but for now I'm very pleased with this system. Will do business again! Fast shipping!
|
Customer Service
