Expert Service 1-877-289-7664 [Hours]

Boom. SUBTEMBER is here!

Pyle PL683BL

6" x 8" 3-Way Blue Label Series Coaxial Car Speakers

In Stock
|

List price $79.99

$29.95

with warranty

You Save: $50.04 (62.56%)

Arrives by Wednesday, Sept. 24 to zip 07095

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Will this fit my ride?

Check Vehicle

In Stock

Arrives by Wed, Sept. 24

Get FAST answers from customers ASK a Question See questions answers

Pyle Blue Label Series

Pyle has manufactured the perfect balance of quality and cost. These attractive speakers are the perfect replacement for your factory speakers. Available in most sizes and styles, they are built with good quality, low-cost materials to keep the cost as low as possible. The Poly injected speaker cones will produce a warm natural sound. This warm sound will naturally roll off into the subtle presence of soft frequencies produced by the tweeter. The second tweeter made of Piezo completes the over-all sound by introducing a super-high frequency spectrum that's blended into the rest of the sound. The Silk Dome tweeter is designed with a small, yet highly efficient magnet motor structure in order to produce frequencies up to 20,000 Hz, which is about the extent the human ear can hear up to. These speakers offer a truly non-fatiguing sound at a very reasonable price. Look no further than the Blue Label Series, by Pyle.

General Features:

  • 6" x 8" Blue Label Series 3-Way Car Speakers
  • Power Handling:
    • Peak: 720 watts per pair / 360 watts each
    • RMS: 360 watts per pair / 180 watts each
  • Poly injected cone material
  • Non-fatiguing Butyl Rubber surround
  • 1" Neodymium Film Dome midrange
  • 3/4" Piezo tweeter
  • 4 ohms impedance
  • 1" high-temperature ASV voice coil
  • 40oz. magnet motor structure
  • Includes grills, wires and mounting hardware
  • Sensitivity: 91dB
  • Frequency response: 70-20,000 Hz
  • Top-mount depth: 2-3/8"
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Priced Per Pair

Speaker Specifications

Series
This is the manufacturer product line of speakers.
Blue Label (Pyle)
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Pair
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6" x 8"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
3-way
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Neodymium Film
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Not Specified by Manufacturer
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Butyl Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
360 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
180 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
91 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
70 - 20000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-5/16"
Bottom-Mount Depth
The depth when installed from the bottom of the mounting surface. Measured from the bottom of the speaker's magnet to the top of the mounting holes on the rim of the speaker.
2-11/16"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
5-1/2" x 7-3/4" 
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
45%
4 Star
36%
3 Star
9%
2 Star
0%
1 Star
9%

Average Attribution Rating

Durability
4.2
Value
4.5
Features
4.1
Design
4.1
Usability
4.4
Rdmitch

Lorain, ohio

Overall
Durability
Value
Features
Design
Usability
There alright, a good deal for the price

September 9, 2014

For the price they do the job pretty well. Frankly I only picked these because they were the only 6x8's that came with a grille! Since they were going on the back doors of a cargo van and the real speakers are in the front door, I was not too picky. The rear doors have no finish panel on them and I had to have a grille....so these were the choice. Took all of 10 minutes to install, had all the needed wire and hardware and surprisingly they sound pretty decent. Overall I am pleased with these.

0 of 0 found this helpful

Help our customers find the most helpful reviews

tinylocs

sun valley

Overall
Durability
Value
Features
Design
Usability
good value

April 18, 2014

These sound good for the price very loud still sounds good.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Zeek

covington, GA

Overall
Durability
Value
Features
Design
Usability
the blue label

April 6, 2014

Bought 4 of these and first off ill say there power rating isnt quite on, in fact not close. can not handle as much as they say, however they can still handle a good bit and sound very clean and loud. bass surprised me to and i only had it on hi pass. i would recommend these speakers, still a good by for the $. put them in one of my friends cars and he loves it.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Marcos/Elizabeth

Moultrie, GA

Overall
Durability
Value
Features
Design
Usability
Everything is good

January 27, 2014

Bought these for my Ford Ranger ext. cab. Crisp clear sound with no cracking sounds when I have my system turned up. I have a Boss with a 3400 watt amp and an e.q. attached to a compositor and 15 inch speaker.

0 of 0 found this helpful

Help our customers find the most helpful reviews

T

Saginaw, MI

Overall
Durability
Value
Features
Design
Usability
Adequate

October 5, 2013

The Pyle PL683BL are an adequate speaker and a good value at the price. The only complaint is the wire provided with the speakers is too short, wire is cheap, and should be lengthened about 10 feet to provide enough length for proper routing.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Leo

Coral Springs

Overall
Durability
Value
Features
Design
Usability
Great price and sound

September 15, 2013

I put these speakers on my front doors and they sound great. The quality is good, price is very good and they look very nice.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Larry

Canada

Overall
Durability
Value
Features
Design
Usability
pyle

August 12, 2013

Great double din deck. Easy install, lots of features, great value for the money. Would buy again not a problem.

0 of 0 found this helpful

Help our customers find the most helpful reviews

brooklyn ny

Overall
Durability
Value
Features
Design
Usability
strong lil thangs

July 17, 2013

Looked around and came across these. Liked the specs and watts. Read the reviews here and on other sites that sold them also. A lot of positive reviews. When I got them, as with any speakers.. I hooked them up to my home stereo. I was happy that I had only one hooked up, unhooked all the other speakers to isolate just one pyle, and I could hear it from the back all the way through my house and outside the door. Couldnt wait to throw them in my expedition. Fit was exact. Did the swap myself on watching a how to vid on youtube. Awesome sound running from the stock mach system. Shout out to Sonic Electronix and youtube for saving me a lot of money and time. I recommend these speakers

0 of 0 found this helpful

Help our customers find the most helpful reviews

preston

Garland, TX

Overall
Durability
Value
Features
Design
Usability
Great Product

May 15, 2013

Bought this for a single cab truck and wow what an amazing performer. For a basic 3-way off the head unit, it rocks as loud and clear.

0 of 0 found this helpful

Help our customers find the most helpful reviews

John

Dunedin, FL

Overall
Durability
Value
Features
Design
Usability
Big improvement over stock for the price

August 3, 2012

For the price these are a pretty good value. These really made the higher frequencies come alive. I put 2 pairs in a 2001 F150 super cab. The originals are 1 way cheap paper cones. Nothing compared to these 3 way speakers. Not sure if these can actually handle the wattage claimed. I will find out when I add a second 4 channel amp to boost these to keep up with a pair of 10" Kenwoods under the rear bench. Pushing 300 watts rms each. 1 negative is the cheesy looking built in tweeter, but not an issue under stock speaker covers. Stealth.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Robert

Philadelphia, PA

Overall
Durability
Value
Features
Design
Usability
DO NOT WASTE YOUR MONEY

February 14, 2012

Do not buy these pyle they are very bad and a waste of my money and time. My walkman back in the day sound better. I am sending them back to get me some Kicker.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $44.95

Belva 23 ft. of True Spec 12 Gauge Speaker Wire

100% Copper Clad Aluminum, high strand count with ultra-flexible PVC blended jacket for easy installation

Your Price $14.99

12-10 AWG Butt Connectors

These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

Your Price $6.99

12-10 AWG Yellow T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

12-10 AWG Quick Disconnect Connectors

These yellow quick disconnect connectors make it easy to connect and disconnect speaker wire your to your new aftermarket speakers!

Your Price $6.99

NVX SDSK2 Speaker Kit

Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!

Your Price $14.99

Dynamat Xtreme Speaker Kit 10415

Enough sound dampening for 2 speakers!

Your Price $17.95

Stinger Roadkill Speaker Kit

Use this to eliminate rattle from your speakers!

Your Price $13.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

Browse 1 question and 2 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
i was skeptical at frst, but after i got these installed i was pleasantly surprised at the quality of these speakers. i put them in a 97 ford ranger regular cab and they are just amazing. im thinking about getting another set and hooking them up to my home theater system.
Brad H on Aug 30, 2014
Reviews are positive and specifications for range and RMS rating are great for this price range. Great value for a great price. On top of all this, Sonic electronix has free shipping.
john p on Aug 14, 2014

Product Summary

Manufacturer

Model Number

PL683BL

UPC

068888721097

Weight

4.35lbs

Internal SKU

pl683bl

Internal Product ID

42284

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Pyle PL683BL