Expert Service 1-877-289-7664 [Hours]

Shipping Promo

Pyle PL573BL

5" x 7" 3-Way Blue Label Series Coaxial Car Speakers

In Stock. Only 1 Left!
|

List price $59.99

You Save: $39.00 (65.01%)

$20.99

with warranty

Arrives by Monday, Dec. 22 to zip 07095

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Will this fit my ride?

Check Vehicle

In Stock

Arrives by Mon, Dec. 22

Get FAST answers from customers ASK a Question See questions answers

Buy 2 Pairs of the PL573BL + the NVX SDSK2 Sound Dampening Kit & Save $14.00 + Receive a FREE Speaker Harness!


Click here to buy the combo package!

Pyle Blue Label Series

Pyle has manufactured the perfect balance of quality and cost. These attractive speakers are the perfect replacement for your factory speakers. Available in most sizes and styles, they are built with good quality, low-cost materials to keep the cost as low as possible. The Poly injected speaker cones will produce a warm natural sound. This warm sound will naturally roll off into the subtle presence of soft frequencies produced by the tweeter. The second tweeter made of Piezo completes the over-all sound by introducing a super-high frequency spectrum that's blended into the rest of the sound. The Silk Dome tweeter is designed with a small, yet highly efficient magnet motor structure in order to produce frequencies up to 20,000 Hz, which is about the extent the human ear can hear up to. These speakers offer a truly non-fatiguing sound at a very reasonable price. Look no further than the Blue Label Series, by Pyle.

General Features:

  • 5" x 7" Blue Label Series Coaxial Car Speakers
  • Power Handling:
    • Peak: 600 watts per pair / 300 watts each
    • RMS: 300 watts per pair / 150 watts each
  • Poly injected mid-woofer cone material
  • Non-fatiguing Butyl Rubber surround
  • 1" Neodymium Film Dome midrange tweeter
  • 3/4" Piezo super tweeter
  • 4 ohms impedance
  • 1" high-temperature ASV voice coil
  • 20oz. magnet motor structure
  • Includes Grills, Wires And Mounting Hardware
  • Sensitivity: 90dB
  • Frequency response: 80-20,000 Hz
  • Top-mount depth: 2-1/4"
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Priced Per Pair

Speaker Specifications

Series
This is the manufacturer product line of speakers.
Blue Label (Pyle)
Priced Per
Car Speakers are typically sold in pairs so you will receive 2 speakers for each speaker purchase on speakers marked "Priced Per Pair". If a speaker is marked "Priced Per Each" then the speaker is sold individually and each purchase you make will result in 1 speaker. High-powered tweeters, midrange and full-range pro audio for car speakers are typically sold per each speaker.
Pair
Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
5" x 7"
Design
The number of individual drivers in a car speaker. Speakers with 2 drivers are known as a 2-way, and 3 drivers are known as a 3-way. Component systems are often referred to as "separates" because the tweeter is not attached to the midwoofer (main speaker driver) and mounts separately in a location such as a door post. Component systems typically come with an external crossover so you can easily adjust the high and low frequencies sent to both the midwoofer and the tweeter. Center channel speakers are great for those looking to have surround sound in their vehicle.
3-way
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Neodymium Film
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Butyl Rubber
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
300 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
150 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
90 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
80 - 20000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-1/16"
Bottom-Mount Depth
The depth when installed from the bottom of the mounting surface. Measured from the bottom of the speaker's magnet to the top of the mounting holes on the rim of the speaker.
2-3/8"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
5-1/2" x 7-1/2" 
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
43%
4 Star
57%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.1
Value
4.7
Features
4.0
Design
4.7
Usability
4.9
Richman716

Buffalo, NY

Overall
Durability
Value
Features
Design
Usability
Great Speaker for the $

November 21, 2014

Great Price for a Good Quality Speaker, Looks nice too

0 of 0 found this helpful

Help our customers find the most helpful reviews

Gary

Doylestown, Oh

Overall
Durability
Value
Features
Design
Usability
pyle speakers

July 28, 2014

I bought these speakers for 2004 ford ranger. thus far they sound real good, and I seem to be very satisfied. Thank you for the product, and following up on my purchase.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Nick James

aurora, CO

Overall
Durability
Value
Features
Design
Usability
great budget speakers!

February 13, 2014

These speakers sound amazing powered with only 80 watts off my 5 channel hifonics Brutus amp. If you can afford the little extra in money and can make them fit I would recommend the 6x9 of theses cause they have an extra tweeter.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Matthew

Parkersburg, WV

Overall
Durability
Value
Features
Design
Usability
Good deal

September 24, 2013

This is a decent speaker but the reality is when installed in the back it isn't that loud. But aside from high end speakers with an amp you wont be disappointed with these speakers for the price just understand what you are getting.

0 of 0 found this helpful

Help our customers find the most helpful reviews

preston

Garland, TX

Overall
Durability
Value
Features
Design
Usability
Great Product

May 15, 2013

Bought this for a single cab truck and wow what an amazing performer. For a basic 3-way off the head unit, it rocks as loud and clear.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Brian

Springfield, Oregon

Overall
Durability
Value
Features
Design
Usability
Pyle PL573BL

March 27, 2013

This is an excellent replacement speaker for the price and quality.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Jim

Waldo, Florida

Overall
Durability
Value
Features
Design
Usability
Pyle PL573BL Speakers a great Value

December 5, 2012

I replaced the speakers in my daughters car with a pair of these speakers. They sound great and the install was really easy. Her speakers mount in the doors. The quality and craftsmanship of the speakers far exceeded my expectations as the price was so low. I am very happy with my purchase and got a second set for her back doors as they sound so much better the the OEM speakers. I am also going to buy a set for my truck.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

Streetwires 25 ft. of True Spec 12 Gauge Speaker Wire

You need speaker wire to connect your speakers!

Your Price $44.95

12-10 AWG Butt Connectors

These yellow butt connectors are ideal when connecting thicker speaker wire your new aftermarket speakers.

Your Price $6.99

12-10 AWG Yellow T-Tap Adapters

Allows for fast and easy splicing of wires by easily tapping into the cable.

Your Price $4.49

Dynamat Xtreme Speaker Kit 10415

Enough sound dampening for 2 speakers!

Your Price $17.95

Stinger Roadkill Speaker Kit

Use this to eliminate rattle from your speakers!

Your Price $13.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $14.99

Xscorpion WDCR2 Window and Door Clip Remover

Removes and installs handle and window crank clips.

Your Price $6.99

3 in 1 Wire Quick Splice T-Tap and Butt Connector Crimper + Wire Cutter

Used for cutting copper and aluminum wires up to 8 gauge.

Your Price $21.99

NVX SDRLR1 Sound Dampening Rubber Roller

Install your Sound Dampening with ease! This heavy duty rubber roller is designed specifically to install your NVX products!

Your Price $7.99

Items we think you might want
HS-574 thumbnail
Hitron HS-574

• 350 Watts Max
• 60 Watts RMS
• Injection Cone Woofer
• Rubber Surround
• Mylar Dome Tweeter and Piezo SuperTweeters
• 1" Voice Coil

Your Price $19.99

F257 thumbnail
SoundStorm (SSL) F257

• 115W Max
• 58W RMS
• Blue metallic poly-injection cone woofer
• Butyl rubber surround
• 1" Polymide dome tweeter
• 1" High-temperature voice coil
• 4 ohms impedance

Your Price $16.95

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

PL573BL

UPC

068888721080

Weight

3.86lbs

Internal SKU

pl573bl

Internal Product ID

42288

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Pyle PL573BL