Pyle PLG64 (Mid-Range Woofer)

6-1/2" Gear-X Series Mid-Range Woofer Bass Car Speaker

In Stock. Only 1 Left!
|

List price $39.99

$15.99

with warranty

You Save: $24.00 (60.02%)

Order within 68 hrs 13 mins to ship 11/3

Arrives by Thursday, Nov. 6 to zip 07095

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock. Only 1 Left!

Arrives by Thu, Nov. 6

Get FAST answers from customers ASK a Question See questions answers

Pyle’s GEAR Series

Looking for top quality woofers at an affordable cost? Pyle has what you’re looking for. Equipped with a Polypropylene cone, these speakers give off a warm balance of frequencies that you won’t get tired of. The steel basket eliminates sound waves that cause noise cancellation, resulting in a very clear sound output. With a 4 ohm impedance, these speakers pair perfectly with just about any car stereo or aftermarket amplifier. For a quality sound at a price that won’t sink your wallet, look to Pyle Audio.

General Features:

  • 6-1/2" Gear-X Series Car Mid-Bass Driver
  • Power Handling:
    • Peak: 300 watts each
    • RMS: 150 watts each
  • Yellow Polypropylene cone material
  • Treated Rubber speaker surround
  • Edge-driven suspension for maximum excursion
  • 4 ohms impedance
  • 1" high-temperature Aluminum voice coil
  • 30oz. magnet motor structure
  • Rubber magnet boot cover
  • Top-mount depth: 2-7/8"
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Priced Individually

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
300 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
150 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Polypropylene
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Rubber
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Minimum Ported Box Volume
This value indicates the minimum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Ported Box Volume
This value indicates the maximum ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
2-7/8"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 – 10.
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 – 10.
Efficiency Bandwidth Product (EBP)
This number represents the trade off between having an efficient woofer and one with a wide bandwidth. To calculate this number, take the Fs and divide it by the Qes. If the number is below 50, the woofer is designed for a sealed enclosure only. If it's between 50-100 it can be used in either. Lastly, if it's greater than 100 it's designed for vented enclosures.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
60%
4 Star
20%
3 Star
20%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.6
Value
4.6
Features
4.4
Design
4.7
Usability
5.0
Scobra667

Pensacola, Florida

Overall
Durability
Value
Features
Design
Usability
Mid range woofers

September 22, 2014

Product has ok response, good for the cost, but not something I would install in a nicer car/truck. I installed these into a street rally car, and they do fair for drowning out road noise.

0 of 0 found this helpful

Help our customers find the most helpful reviews

thumpin-saturn

santa rosa, CA

Overall
Durability
Value
Features
Design
Usability
i like 'em

March 2, 2014

I purchased two of these speakers for a very reasonable price....they were an upgrade from the previous 5" planet audio mid .bass drivers that were about worn out....I installed these speakers in the rear deck of my Saturn sedan and the fit perfectly with no modifications at all...strictly a bolt in unit....they are powered by a 500 watt rms Auto tek four channel amp on channels 3 & 4....I set the selector switch to full range on the amp and turned the gain up about 1/3 and so far.....so good...they produce the right amount of bass and mids that my system seemed to be missing b4......I ordered a power acoustic sub that will arrive in a couple of days so I haven't really had the chance to really wring them out yet with a full system but I anticipate that they will do just fine....u can't go wrong with the price and the quality is great.....I am going to replace my front speakers with a Pyle component set very soon......

0 of 0 found this helpful

Help our customers find the most helpful reviews

dj

virginia

Overall
Durability
Value
Features
Design
Usability
good price

January 24, 2014

Great design very clear sound all round. I use them with no amp an they beat like a sub

0 of 0 found this helpful

Help our customers find the most helpful reviews

mike

ensenada, PR

Overall
Durability
Value
Features
Design
Usability
great sound

September 18, 2013

Sounds great....super clear with a good bump they look good too.have 8 of these bad boys...and will get another 8 soon..

0 of 0 found this helpful

Help our customers find the most helpful reviews

jose

gardena ca

Overall
Durability
Value
Features
Design
Usability
good

September 17, 2013

Lo reconbiendo por q tiene un buen sonido claro tiene un look bien no cuesta tanto

0 of 0 found this helpful

Help our customers find the most helpful reviews

jose

gardena ca

Overall
Durability
Value
Features
Design
Usability
good

September 17, 2013

Lo reconbiendo por q tiene un buen sonido claro tiene un look bien no cuesta tanto

0 of 0 found this helpful

Help our customers find the most helpful reviews

don

SW, Florida

Overall
Durability
Value
Features
Design
Usability
Nice sounding! Good Value!

July 9, 2013

This woofer fit in my Jeep just where I needed it and sounded great! Thanks.

0 of 0 found this helpful

Help our customers find the most helpful reviews

patrick

sanford, FL

Overall
Durability
Value
Features
Design
Usability
excellent value

July 2, 2013

Needed a mid range speaker to round out my system the sound quality is superb, the price was just an added bonus.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Chaz

Suffolk, Virginia

Overall
Durability
Value
Features
Design
Usability
PLG 64 Mid-Bass

May 13, 2013

Price vs comparable competition. Not the best avaiable but slightly better than OEMs far as stats. Decent mid bass as long as you don't drive it into saturation. Now need to replace the tweets and Mids. May stay all Pyle unless my ADS fit.

0 of 0 found this helpful

Help our customers find the most helpful reviews

slizenyuten

Landover, MD

Overall
Durability
Value
Features
Design
Usability
Awesome speakers for the price!

February 7, 2012

First of all, you have to buy 2 of these because it is sold per piece. The price is a steal if you ask me! The speaker itself looks absolutely cool, durable and powerful. It was easy to install with the help of a pair of speaker adapter brackets (location: rear deck). I combined them with a pair of MTX TN653's (front door). To test the bass, I used my MP3 music collection that has a lot of bass applications and to my absolute amazement, the combination was perfect. Not over nor under bass and that is without an amp and I am just using my factory head unit. I was planning to purchase an amp but after I heard the sound the pyles produced, I am quite happy without an amp.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $44.95

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $59.99

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $109.95

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $69.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $6.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

40" x 15 Ft Piece of Premium Un-Backed Automotive Trim Carpet

Durable design for long life-span, available in many colors and shades.

Your Price $39.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $1.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $14.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $79.99

4 Ft of 1/4" Thick Black Heat Shrink Tubing

Provides abrasion resistance and added protection for your cables.

Your Price $3.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $8.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

Your Price $299.99

Browse 2 questions and 3 answers
Hide answersShow all answers | Sort by
Why did you choose this?
Sonic Electronix Store
very good price & quality I've had Pyle subwoofers yrs ago and they BUMP like crazy!! now I prefer tight cleaner bass w/component set and these have great feedback can't wait to use them in my lil hatchback. =) for the rear area don't want big bass box anymore.
DEAN T on Oct 14, 2014
could this pyle plg64 6.5'' mid fit into the average car door?
not sure on Aug 8, 2014
Best Answer: More than likely i would think .its not a shallow mount speaker but it really not that big of a speaker either... So..define `average"....they do fit good i. The rear deck of my saturn sl2 sedan and they clear my trunk spring bar thingies pretty good and there isn't much room back there......so take a chance.u cant beat the price for the power and sound quality..
Reply · Report · eric b on Aug 9, 2014
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

PLG64

UPC

068888876261

Weight

3.05lbs

Internal SKU

plg64-woofer

Internal Product ID

42927

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Pyle PLG64 (Mid-Range Woofer)