Expert Service 1-661-257-9993 [Hours]

Cadence CVLT45

300W 1" CVL Series 4-Ohm Aluminum Bullet Super Tweeters

Discontinued
|

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

xt45 thumbnail

Cadence XT45 (CVLT45)

OUR PRICE: $24.99

View item

Item Added to Cart

Cadence CVLT45

300W 1" CVL Series 4-Ohm Aluminum Bullet Super Tweeters

$21.95

Keep Shopping

NVX XWS1625

25 ft. of True Spec 16 Gauge EnvyFlex Speaker Wire

$15.99

Add
Dynamat Xtreme Wedge Pak

Just enough Dynamat to install around tweeters and speakers.

$24.99

Add
Door Panel & Upholstery Remover Tool

Easily remove your door panels and other panels to make the installation of your new tweeters easy.

$6.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Cadence CVLT45.

Get FAST answers from customers ASK a Question See questions answers

General Features:

  • 1" CVL Series 4-Ohm Aluminum Bullet Super Tweeters
  • Power Handling:
    • Peak: 300 watts per pair / 150 watts each
    • RMS: 150 watts per pair / 75 watts each
  • Aluminum Diaphragm
  • Cast Aluminum Frame
  • 1" High Temperature Kapton Voice Coil
  • 4 ohms impedance
  • Frequency Response: 3-23,000 Hz
  • Top-mount Depth: 1.50"
  • Cutout Diameter: 3.00"
  • Magnet Weight: 10 oz
  • Structure Weight: 20 oz
  • Sensitivity: 102dB
  • Packed in Pairs with Mylar Bass Blocking Capacitors
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Priced Per Pair

Product History:

Cadence XT45 thumbnail
(newest, current model)
Cadence CVLT45 thumbnail
(previous model, replaced by Cadence XT45 (CVLT45))

Tweeter Specifications

Priced Per
Car Tweeters are typically sold in pairs so you will receive 2 tweeters for each purchase on tweeters marked "Priced Per Pair". If a tweeter is marked "Priced Per Each" then the tweeter is sold individually and each purchase you make will result in 1 tweeter. High-powered tweeters are typically sold per each tweeter.
Pair
Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
1"
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Bullet
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Aluminum
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
150 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
75 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
102 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
3 - 23 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
1.50"
Bottom-Mount Depth
The depth when installed from the bottom of the mounting surface. Measured from the bottom of the speaker's magnet to the top of the mounting holes on the rim of the speaker.
3.00"
Hi-Res Audio Compatible
This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
100%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
4.0
Usability
5.0
Wojo007

Modesto, CA

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Cadence CVLT45

February 1, 2016

For the price and durability not to shabby,a little bulky but shit it goes well with my chev 4x4, they will give you loud highs just don't put to much power to them,they will overheat and fry,but I really like them because voice coil is simple to replace and cheap. Can't go wrong.

0 of 0 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

NVX XWS1625

25 ft. of True Spec 16 Gauge EnvyFlex Speaker Wire

Your Price $15.99

Belva BBSW167

16 Gauge 7 Meter (23 Ft) Speaker Wire

Your Price $12.99

Dynamat Xtreme Wedge Pak

Just enough Dynamat to install around tweeters and speakers.

Your Price $24.99

Door Panel & Upholstery Remover Tool

Easily remove your door panels and other panels to make the installation of your new tweeters easy.

Your Price $6.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $7.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $18.99

Browse 1 question and 1 answer
Hide answersShow all answers | Sort by
I have a 1988 Ford Ranger that I am restoring, I was fortunate to get (4) Q-power 10" woofers in an enclosure that fits comfortable to my liking and it bangs just needing the correct amps to push these subs. I am thinking about purchasing (2) of these amps just for the low end and maybe (2) Power Acoustik RZ4-2000D for all of the Coaxials and additional tweeters.

What are your thoughts?
A shopper on Jul 11, 2015
Cadence CVLT45
Cadence CVLT45
Power Acoustik RZ4-2000D
Power Acoustik RZ4-2000D
Power Acoustik XP-402K
Power Acoustik XP-402K
Power Acoustik RZ1-2300D
Power Acoustik RZ1-2300D
Best Answer: Hello,

We can't speak on the subwoofer vs amplifiers, because we don't know what subwoofers you are referring to, as you've only provided a description. We would need a proper model number to provide an accurate answer. As for the Speakers/Tweeters vs Amplifier, four speakers on one amplifier and four tweeters on one amplifier will work well. The system would have to be fine tuned, consult an installer for that, and would require a steady steady from the source. The figures provided by this manufacture can be a bit ambitious and often only reached at very high voltage level, but this works in your favor, as long as the system is properly tuned.
Reply · Report · Rick MStaff on Jul 11, 2015
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

CVLT45

Weight

2.70lbs

Internal SKU

cvlt45

Internal Product ID

43256

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Cadence CVLT45