Expert Service 1-877-289-7664 [Hours]

Fall Blow Out Dot Sale

Rockford Fosgate M600-4D

600W RMS 4-Channel Full Range Class D Marine Amplifier

In Stock
|

List price $599.95

$269.99

with warranty

You Save: $329.96 (55.00%)

Order within o hrs 23 mins to ship 10/27

Arrives by Wednesday, Oct. 29 to zip 20147

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Wed, Oct. 29

Get FAST answers from customers ASK a Question See questions answers

General Features:

  • 4-Channel Full Range Class D Marine Amplifier
  • RMS Power Rating:
    • 4 ohms: 100 watts x 4 chan.
    • 2 ohms: 150 watts x 4 chan.
    • Bridged, 4 ohms: 300 watts x 2 chan.
  • UV resistant and Salt-fog marine protection
  • Pulse Width Modulated MOSFET power supply
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +18 dB bass boost at 50 Hz)
  • Soft start turn-on
  • 4/3/2 channel operation
  • Preamp RCA output to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • High-density split-dome convection heat-sink for extreme heat dissipation
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Input sensitivity:
    • Low level: 125mV-5V
    • High level: 250mV-10V
  • Variable high-pass filter (50-500 Hz, 24 dB/octave)
  • Variable low-pass filter (50-500 Hz, 24 dB/octave)
  • CEA-2006 compliant amplifier
  • Frequency response: 20-20000 Hz
  • 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Dimensions: 6-7/10"W x 11-1/16"L x 2"H
  • 1-year SonicElectronix.com Warranty

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

100 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

150 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

300 watts x 2 channels

Amplifier Specifications

Marine Certified
Marine certified means that the unit has been designed and manufactured with a marine use in mind. It will withstand the harsh conditions that come from marine use. Generally, they are treated against UV rays and treated with special protective coatings.
Yes
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
4
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

600 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
High-pass (HP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 200 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 200 Hz
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 18 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
No
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
71%
4 Star
0%
3 Star
29%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
3.7
Value
4.7
Features
4.3
Design
4.9
Usability
4.7
Clark

Fullerton, CA

Overall
Durability
Value
Features
Design
Usability
Great sound

August 22, 2014

Have only had for a few weeks but so far everything works great. The sound is much better than my old Sony amp. Clearer sound especially at high volume. The amp has plenty of power for my small open boat even in wind and at 30mph. Instalation was easy. Had to install heavier wire and a bigger fuse.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Frank

Miramar, FL

Overall
Durability
Value
Features
Design
Usability
Giving it a second shot

May 20, 2014

Received it from Sonic installed it and it sounded excellent. It's been 1 year and 2 months and now the unit stopped working. The unit powers on but there's no output to the speakers. I have it installed to a Clarion M502 and 4 Polk Audio MM6501. I'm giving it a second chance and ordering another since the sound quality was so good. I'm really hopping this one last a long time.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Fernando

Puerto Rico

Overall
Durability
Value
Features
Design
Usability
Super Value!

February 20, 2014

Bought the Amp a month ago and I am very satisfied with both Sonic and Rockford Fosgate. Did not rate high for durability since its a brand new item for me.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Mike

Atchison Ks

Overall
Durability
Value
Features
Design
Usability
Second try

September 17, 2013

I bought this product twice and the first one burnt up!! I reordered and the second unit works well but gets very hot!!!! Lots of air space around it!!! It will definitely crank out the sound!!! I have a all Rockford system the M1200 mono amp is great !!! 2 Rockford marine 10" subs 2 marine 8" and 2 marine 6.5 speakers !!! It sounds great!!!

0 of 0 found this helpful

Help our customers find the most helpful reviews

$torm

Canada

Overall
Durability
Value
Features
Design
Usability
Rockford Fosgate Marine Amp

June 11, 2013

Runs 600 watts to my cadence comp 6x9s Beast set up

0 of 0 found this helpful

Help our customers find the most helpful reviews

Jay

Bostic, NC

Overall
Durability
Value
Features
Design
Usability
Another home run!

January 17, 2013

i have 3 of these in my boat. and they just flat out jam. its another great product from RF. i would recommend this to anyone with out hesitation or delay.

0 of 0 found this helpful

Help our customers find the most helpful reviews

freddie

kodak, TN

Overall
Durability
Value
Features
Design
Usability
this is a monster amp

September 21, 2012

I have had this amp in the back of my chevy caprice, the trunk leaked and even with the water from the rain i never missed a beat. I would recomend besides rockford makes top notch equipment. I would recomend this amp to anyone whether boat leaky trunk or car looks great in a car as well.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX XKIT42

Complete 4 Gauge Amp Wiring Kit with RCA Interconnect Cables and Speaker Wire!

Your Price $69.99

The InstallBay AK4 by Metra

4 Gauge Amplifier Installation Kit with RCA Interconnect Cable

Your Price $24.99

StreetWires ZN1K-04

4 Gauge (AWG) ZN1 Series Single Amplifier Installation Kit for Systems up to 1000 Watts

Your Price $49.95

Kicker Q-Series RCA Interconnect Cable

19 ft. of 4-Channel Q-Series RCA Cable with dual twisted-pair conductors, hyper-flex technology, and gold-plated k-cut collars for excellent signal transfer.

Your Price $59.95

Kicker 4-Channel RCA Audio Interconnect Cable

4 Meters (13 ft.) 4-Channel K-Series RCA Audio Interconnect Cable

Your Price $19.95

StreetWires ZN9 Series Interconnect Cable

16.4 ft. of 4-Channel RCA Cable with Rhodium-plated contacts and ZeroNoise construction for clear signal transfer!

Your Price $99.95

StreetWires SCP1215BL - 12 AWG Speaker Wire

12 Gauge Wire - 15 ft. of Speaker Cable with Twisted Construction

Your Price $24.95

StreetWires FB4

4 AWG / 4 Gauge Firewall Bushing

Your Price $6.95

Car/Marine Audio Installation Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $14.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

M600-4D

UPC

633621475638

Weight

6.55lbs

Internal SKU

m6004d

Internal Product ID

43379

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Rockford Fosgate M600-4D