Expert Service 1-877-289-7664 [Hours]

2nd Annual Warehouse Sale- more products added!

SoundStorm SX310

3-Way Electronic Crossover

Discontinued
|

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Product Features:

  • 3-Way Electronic Crossover, Remote Subwoofer Level Control
  • Front, rear and sub inputs
  • Selectable crossover frequencies:
    • Front high pass: 32Hz to 250Hz
    • Rear High pass: 40Hz to 400Hz
    • Subwoofer: 40Hz to 400Hz
  • Frequency multiplier: x1 or x20
  • Selectable crossover slope: 6 dB/octave or 12 dB/octave
  • Remote subwoofer level control
  • Parallel input switch (permits feeding multiple Channels from one input)
  • Bass boost: variable 0 to +12DB
  • Bass boost frequency selector: 25Hz to 250Hz
  • Phase shift switch
  • Stereo/mono switch (subwoofer)
  • independent front, rear and subwoofer output level controls
  • Speaker input level adjustment
  • Output voltage: 8 Volts (max)
  • Signal-to-noise ratio: 110 dB
  • Dimensions: 8-1/2" (W) x 7-3/8" (L) x 1-5/8" (H)
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Crossover Specifications

Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

Equalizer Bands
The number of graphic or parametric equalizer bands the receiver has. The better the EQ, the more likely you will be able to "tweak" your sounds to your desire.
Built-in Bass Reconstruction
Bass reconstructors, or bass enhancers, improve low frequency reproduction in a car audio system with at least one subwoofer. These bass expander products will help your subs produce accurate bass thumps.
Line Driver
A line driver is a small amplifier used to support the strength of the audio signal coming from the source unit.
Display Color
The display color refers to the color of the text and or graphics on the receiver.

Multi-Color: When more than one color is on the display, for example one part of the text is white, while the other part is blue.

Variable-Color: The display colors can be changed by the user. If the default color of text/display is blue for example, the user can change the settings to where the color turns to red. Variable color displays are typically described in detail in the item's description.

TFT-LCD Display: In-dash receivers with a video screen that display multiple colors and often times video such as DVD, navigation or other video sources.

Button Color
Refers to the color of the physical buttons on the unit.
Equalizer Frequencies
The frequency range that allows control of the center frequency of each equalization band.
Signal Boost/Cut
The available signal boost or cut for each of the frequency bands.
Max Output Level
The maximum level (in volts) of signal output. A higher level will increase the clarity and boost your signal.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
Width
The width of the item from left to right (side-to-side) measured in inches.
Height
The height of the item, measured from top to bottom, in inches.
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
100%
1 Star
0%

Average Attribution Rating

Durability
2.5
Value
3.5
Features
4.0
Design
4.0
Usability
4.5

Beef

Atlanta

Overall
Durability
Value
Features
Design
Usability

Not so great

March 2, 2013

After just 2 days of lite using it the front channel went out! By the end of the week it has a heartbeat with no music playing.

0 of 0 found this helpful

Help our customers find the most helpful reviews

ced

waycross ga

Overall
Durability
Value
Features
Design
Usability

sx310 crossover

December 22, 2012

I had one before it worked pretty good but this one i got the sub remote had a short in it.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Product Summary

Manufacturer

Model Number

SX310

UPC

791489104784

Weight

2.90lbs

Internal SKU

sx310

Internal Product ID

43752

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: SoundStorm SX310