Expert Service 1-877-289-7664 [Hours]

Kenwood KAC-7005PS

700W RMS 5-Channel Performance Series Car Amplifier

In Stock. Only 3 Left!
|

List price $400.00

$199.99

with warranty

You Save: $200.01 (50.00%)

Order within 22 hrs 41 mins to ship 10/3

Arrives by Tuesday, Oct. 7 to zip 20147

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock. Only 3 Left!

Arrives by Tue, Oct. 7

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

=

25% Off a 4 Gauge Amp Kit with Purchase!

Save 25% off the Belva BAK44 install kit, you will need an amp kit to install your amp, and this the perfect kit for your amp!

12.50

43779

292

Kenwood KAC-7005PS

$199.99

+

25% OFF

Belva BAK44

$49.99

Special Price $37.49 ($49.99 if purchased separately)

Belva BAK44

• Complete 4 Gauge 4-Channel Amplifier Installation Kit
• Designed Specifically For Car Audio Systems Up to 1000 Watts RMS
• Premium Power and Ground Wire Provides Optimal Power Transfer

(Offer 1 of 1)

Combined Total Price

$237.48

You Save $12.50

General Features:

  • 5-Channel Performance Series Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 40 watts x 4 chan. + 300 watts x 1 chan.
    • 2 ohms: 50 watts x 4 chan. + 500 watts x 1 chan.
    • Bridged, 4 ohms: 100 watts x 2 chan.
  • Pulse Width Modulated MOSFET power supply
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +18 dB bass boost at 50 Hz)
  • Soft start turn-on
  • 5/4/3/2 or Mono channel operation
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Input sensitivity:
    • Low level: 125mV-5V
    • High level: 250mV-10V
  • Variable high-pass filter (50-200 Hz, 24 dB/octave)
  • Variable low-pass filter (50-200 Hz, 24 dB/octave)
  • CEA-2006 compliant amplifier
  • Frequency response: 5-50000 Hz
  • 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Dimensions: 13-2/10"W x 7-2/3"D x 2-2/10"H
  • 1-year Sonic Electronix Warranty

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

40 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

50 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

100 watts x 2 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
Performance (Kenwood)
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
5
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

700 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
.5%
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
High-pass (HP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 200 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

50 - 200 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
80 dB
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
Yes
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
60%
4 Star
40%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.4
Value
4.6
Features
4.2
Design
4.4
Usability
4.6
richard

Wichita, KS

Overall
Durability
Value
Features
Design
Usability
This amp sounds awesome

September 28, 2014

This amp was a great price. It is really to install and sounds great. 5 channel is the way to go to complete a system without the worry of using a ton of space with multiple amps. I only buy Kenwood for a reason. Top quality all the time

0 of 0 found this helpful

Help our customers find the most helpful reviews

Tinde

Finland

Overall
Durability
Value
Features
Design
Usability
Good Kenwood

September 18, 2013

I ordered this amplifier from Finland, it came to me very soon and i´m more than happy what the sounds are. Really good amplifier 4 me.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Elliot

Suwanee, GA

Overall
Durability
Value
Features
Design
Usability
KAC-7005PS

June 10, 2013

Looking for a 5 channel amp with some power for the sub and good clean sound for my interior set. The KAC-7005PS filled all of those requirements wonderfully. Enough power to handle all of my speakers but extremely clean and not overpowering. Highly recommended.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Alex

West Sacramento, CA

Overall
Durability
Value
Features
Design
Usability
Nice output

February 3, 2013

I was looking for a 5 channel amp and this one seemed to be in my budgetand gives a clean output to my speakers.. It does the job its supposed to

0 of 0 found this helpful

Help our customers find the most helpful reviews

Christopher

Elkhart, IN

Overall
Durability
Value
Features
Design
Usability
Good Amp for the value

March 13, 2012

I bought this amp for my 97 Ford Ranger truck. It really does the job for my highs. I have 4 Kenwood 6x8's two in the doors and two in the back behind the seat. Great amp for the mono channel sub. I have a Kicker 12" CVT behind the seats. It slams hard.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX XKIT44 4-Gauge 4-Channel Wiring Kit

4-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire

Your Price $99.99

T-Spec V8-4DAK 4-Channel 4-Gauge Wiring Kit

Get everything you need to hook up your new amplifier!

Your Price $89.95

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $59.99

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

Get all you need including wire cutters to upgrade your power and ground wire.

Your Price $149.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $39.99

StreetWires FB4

4 AWG / 4 Gauge Firewall Bushing

Your Price $6.95

NVX XDBU4 - Top of the Line!

Distribution Block with Two 1/0 or 4 AWG Inputs and Four 4 or 8 AWG Outputs

Your Price $17.99

Stinger SI4617 4000 Series Interconnect Cable

17 ft. 6-Channel 4000 Series Audio Interconnect Cable

Your Price $41.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

NVX XWS1250 Speaker Wire

50 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $29.99

NVX XWS1625 16 AWG Speaker Wire

25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $13.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

Your Price $149.99

Scosche SPL Meter SPL1000F

Handheld boomSTICK measures your SPL range from 60 to 135 dB

Your Price $21.99

Browse 1 question and 6 answers
Hide answersShow all answers | Sort by
can i connect 2ohm load for the subs and 4ohm for my mids?
Dannis L on Sep 20, 2014
Best Answer: Yes
Reply · Report · brandi e on Sep 21, 2014
· Add Answer · I Have This Question Too (0)

Product Summary

Manufacturer

Model Number

KAC-7005PS

UPC

019048197597

Weight

7.00lbs

Internal SKU

kac7005ps

Internal Product ID

43779

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Kenwood KAC-7005PS

  • Kenwood KAC Performance Series Amplifiers
  • How to Install a Car Amplifier