Garage
Shop

Precision Power PPI PDX-10K (Rare Competition Amplifier)

10,000W RMS, Monoblock Class D PDX Series Car Amplifier

Product videos
highlight-star-icon

• RMS: 3700W x 1 @ 2 ohms, 6100W x 1 @ 1 ohms, 10000W x 1 @ 0.5 ohm
• Total RMS Power: 10000W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB
• Class D Circuitry
• Dimensions: 12-5/8"W x 23-1/4"L x 2-3/4"H

Learn more about the pdx10k

We apologize

This item has been discontinued

Product Highlights


• RMS: 3700W x 1 @ 2 ohms, 6100W x 1 @ 1 ohms, 10000W x 1 @ 0.5 ohm
• Total RMS Power: 10000W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB
• Class D Circuitry
• Dimensions: 12-5/8"W x 23-1/4"L x 2-3/4"H

Description


Precision Power brand icon

Authorized dealer

General Features:

  • Monoblock Class D PDX Series Car Amplifier
  • RMS Power Rating:
    • 2 ohms: 3,700 watts x 1 chan.
    • 1 ohms: 6,100 watts x 1 chan.
    • 0.5 ohm: 10,000 watts x 1 chan.
  • Protection sensing circuit for maximum power
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +18 dB bass boost at 40-120 Hz)
  • Soft start turn-on
  • Mono channel operation
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Heavy duty aluminum alloy heat-sink
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Input sensitivity:
    • Low level: 125mV-5V
  • Variable low-pass filter (35-250 Hz, 24 dB/octave)
  • Variable Subsonic filter (15-50 Hz)
  • Damping factor: >1000
  • CEA-2006 compliant amplifier
  • Frequency response: 15-250 Hz
  • 0 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Dimensions: 12-5/8"W x 23-1/4"L x 2-3/4"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 2 ohms
3700 watts x 1 channel
RMS Power @ 1 ohm
6100 watts x 1 channel
Amplifier Specifications
Series
PDX Series
Amplifier Class
D
Number of Channels
1 - Mono
Total RMS Power Output
10000 watts
Maximum Input Gauge Size
1/0 AWG
Minimum Impedance Unbridged
0.5 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
1%
Speaker Level Inputs
No
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
35 - 250 Hz
Subsonic Filter
15 - 50 Hz
Signal-to-Noise Ratio
87 dB
Bass Boost
0 - 18 dB
Remote bass/level controller
Yes
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

PDX-10K

Weight:

48.00lbs

Internal SKU:

pdx10k

Internal Product ID:

43839

Product and How-to Videos


Customer Ratings & Reviews



5 star
29%
4 star
57%
3 star
14%
2 star
0%
1 star
0%



Durability
4.2
Value
4.9
Features
4
Design
4.3
Usability
4.5

Customer Reviews

Sort by:

Loading...

wow

I just finished installing this amp after days of electrical upgrades and testing with my lanzar 4k just to see if I could hold good voltage and break in my sq hdc3 15s in the new 11 CU ft box tuned to 31 Hz. The first thing I noticed was that the low notes were way stronger and absolutely everything is flexing and bouncing stuff out of my center console. It is a much cleaner amp than the lanzar 4k and with voltage makes enough power to distort my subs but thats probably because they're not even close to broke in after about a month of use,still stiff as he'll. I did a lot of research before I bought this beast and sonic was great getting it to me fast. Too bad it was way too cold here to install until today and it was icy as helll trying to do all the crazy wiring required for such a big amp. Be prepared to do the same and spend a lot on batteries and alternators if you're thinking of buying this beast.

By George on January 26, 2015

41

found this helpful.

PDX-10k

John From Dark Horse Car Audio. May I suggest Mechman or DC Power Alternators for the 16 to 18 volts you need to hit the 10,000 watts. There are many battery manufacturers that can also deliver the 16 volts needed to hit 10k. Even at lower voltages its a great amp. Will not hit the full 10k below 16 volts but still a great bargain for dollars to watts. Really stable and a bargain at this price. Done my homework. Would recommend it to anyone. Most amplifier manufacturers rate power at high voltages so be careful no matter what amplifier you buy.

By Dark Horse on December 15, 2012

23

found this helpful.

great power for price

This amp will produce its rated power "IF".... and that is a very big if you can give it what it needs. It is rated for that output on 16 volts not 12 or 14.4 like most other amps on the market. And you MUST have it wired at .5 ohms that is 1/2 Ohms. Along with 1200 amps of power consumption. That puts any idea of using factory charging systems out the window. DO YOUR HOMEWORK boys and girls this amp is for the serious person not your everyday bass head. Great power for the price. Good luck not breaking your windows with this bad boy.

By WildBill on December 13, 2012

23

found this helpful.

very good amp

I have two of these bad boy's. one is powering 4 alpine 15" type R in a 06 dodge ram quad cab and it hitting 156.8 db. @ 30 hertz. you need a upgrade mechman alternator and at least 4 extra batteries. warning anything below 12 volts will kill this amp. do not buy this amp and run it an a factor alternator, it will die. Very good, durable, and easy to install. Use at least 1/0 cable for power.

By Jim G on February 14, 2014

19

found this helpful.

Ppi amp

This thing will never hit 10,000 watts unless lightning hits it! Very powerful though, you can get around 6,000 good watts around 1ohm if you have the rite batteries,wiring and alternator. Dollar for dollar i like this amp a buddy has it. Has 12 alpine subs wired to it in a suburban. Personelly im a fosgate amp guy but this thing sounds great for how much power it can produce. Gona need alot of 0guage and beefy connectors, just a heads up.

By Ground Pounder on September 11, 2012

20

found this helpful.

Great Amplifier!

I own two of these amplifiers and own Dark Horse Car Audio. With good voltage it will hit 10,000 watts easily. That means alternators and several batteries. I have owned and run them in my car for years now without a single problem. I would recommend them to anyone looking for big power at a reasonable price. One of the few amps of this size that will work under 14 volts and not self destruct. I've pulled them down to eleven volts with car off and still no issues. Very solid amplifier.

By Dark Horse Car Audio on December 6, 2012

19

found this helpful.

great price

Need lots of power to run this amp. Be careful, read up on this amp before you buy. I have this on 4 re-xxx 18's all it did was clip every time. I turned it up until I got the right power to it.(needs lots of power)

By ERSH on August 4, 2013

16

found this helpful.

Add-ons


Similar Products

Best selling similar products

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(38)

$164.95

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(28)

$214.99

JL Audio JD1000/1

• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier

(2)

$399.99

Kicker CXA1800.1 (46CXA18001T)

• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier

(10)

$399.96

Crunch GP-3500.1D

• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier

(6)

$99.99

Related Searches


PDX-10K small

Item added to your cart.

Price: $899.95

Essential add-ons
NVX XKIT02 True 0-Gauge Wiring Kit

Full Spec 1/0 Gauge 100% (OFC) Oxygen Free Copper Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 4000 Watts

$199.99

$149.99

Add to cart
Stinger SS2400XS

1/0 Gauge Amplifier Power Kit w/ Blue Twisted RCA & Satin Acc w/ Anl Fuse Stinger

$229.00

$109.99

Add to cart
T-Spec V8-AK1

1/0 Gauge Amplifier Wiring Kit with 2-Channel RCA's

$257.00

$139.99

Add to cart
NVX XAPK0

Full Spec 1/0 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire

$174.99

$147.99

Add to cart
Stinger SK4201

1/0 Gauge Power Amplifier Wiring Kit

$279.00

$147.99

Add to cart
Stinger SK6201

1/0 Gauge Power Amplifier Wiring Kit

$309.00

$159.99

Add to cart
T-Spec V10-AK1

1/0 Gague Amplifier Wiring Kit with 2-Channel RCA's

$149.95

$163.99

Add to cart
NVX XLCA2X

2-Channel Line Out Converter

$159.99

$79.99

Add to cart
NVX XLCA2

2 Channel Line Out Converter with xBOOST

$62.49

$49.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

$149.00

$149.00

Add to cart
X Series RCA Interconnect Cable

16.4 ft. of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors

$29.99

$18.99

Add to cart
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$14.99

$6.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
Rockford Fosgate RFC10HB

Hybrid 10 Farad Digital Stiffening Capacitor

$589.99

$339.95

Add to cart
Stinger SPC5010

10 Farad Pro Digital Hybrid Capacitor

$349.00

$179.99

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal

Make installation a breeze with the XBTU

$24.99

$16.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

$24.99

$13.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

$14.00

$7.99

Add to cart
0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

$9.99

$4.99

Add to cart
2pk - 1/0 Gauge Ring Terminals w 5/16" Opening

2pk - 1/0 Gauge Ring Terminals w 5/16" Opening

$9.99

$4.99

Add to cart
(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing

(4-pack) 1/0 Gauge Solid Copper 5/16 Ring Terminals with Shrink Tubing

$11.99

$9.99

Add to cart
XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

$19.99

$12.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon