Expert Service 1-877-289-7664 [Hours]

14th Anniversary Sale--More Products Added

Precision Power PPI PDX-10K

10,000W RMS, Monoblock Class D PDX Series Car Amplifier

In Stock. Only 2 Left!
|

List price $3649.95

$1049.99

with warranty

You Save: $2,599.96 (0.05%)

Arrives by Tuesday, Aug. 26 to zip 20147

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock. Only 2 Left!

Arrives by Tue, Aug. 26

Get FAST answers from customers ASK a Question See questions answers

Bundled Savings with this Product

FREE Bass Reconstruction Sound Processor w/ Amp!

For a limited time only, get a FREE NVX XBBR bass processor which reconstructs and expands your bass with the purchase of select high-powered amplifiers.

99.99

43839

767

Precision Power PPI PDX-10K

$1049.99

+

100% OFF

NVX XBBR

$99.99

Special Price $0 ($99.99 if purchased separately)

NVX XBBR

• Digital Bass Restoration/Booster Processor
• Low Frequency Adjustment
• Flat Frequency Response
• Removable Terminal Block
• 8 Volt Maximum Output Voltage

Get a FREE 5-year Extended Warranty with Purchase

Receive a FREE 5-year Extended Warranty with your purchase of select Car Audio skus.

89.99

43839

652

Precision Power PPI PDX-10K

$1049.99

+

100% OFF

Warrantech RepairMaster A-RMM51000

$89.99

Special Price $0 ($89.99 if purchased separately)

Warrantech RepairMaster A-RMM51000

5-years extended service plan from the date of purchase for car audio and video products under $1000 including GPS, video and navigation products

FREE True 1/0 Gauge Amp Kit with Purchase!

For a limited time, receive a FREE true 1/0 gauge amp kit by NVX when you purchase select car amplifiers. The amp kit uses the finest materials and is valued at $350 Retail Value.

119.99

43839

530

Precision Power PPI PDX-10K

$1049.99

+

100% OFF

NVX XAPK0

$119.99

Special Price $0 ($119.99 if purchased separately)

NVX XAPK0

• Single Amplifier 1/0 Gauge Power Installation Kit
• For Systems Over 1000 Watts RMS
• Includes Speaker Wire
• Silver-Tinned 100% Virgin Copper
• EnvyFlex Technology
• Solid Brass And Satin-Chromed ANL/Mini-ANL Fuse Holder With 150 amp ANL Fuse

(Offer 1 of 3)

Combined Total Price

$1,049.99

You Save $99.99

General Features:

  • Monoblock Class D PDX Series Car Amplifier
  • RMS Power Rating:
    • 2 ohms: 3,700 watts x 1 chan.
    • 1 ohms: 6,100 watts x 1 chan.
    • 0.5 ohm: 10,000 watts x 1 chan.
  • Protection sensing circuit for maximum power
  • Pulse Width Modulated MOSFET power supply
  • Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +18 dB bass boost at 40-120 Hz)
  • Soft start turn-on
  • Mono channel operation
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Heavy duty aluminum alloy heat-sink
  • Nickel-plated RCA level inputs
  • Nickel-plated screw terminals
  • Input sensitivity:
    • Low level: 125mV-5V
  • Variable low-pass filter (35-250 Hz, 24 dB/octave)
  • Variable Subsonic filter (15-50 Hz)
  • Damping factor: >1000
  • CEA-2006 compliant amplifier
  • Frequency response: 15-250 Hz
  • 0 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Dimensions: 12-5/8"W x 23-1/4"L x 2-3/4"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Power Specifications - Subwoofer Channel

RMS Power @ 2 ohms
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
3700 watts x 1 channels
RMS Power @ 1 ohm
The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far. If the final impedance of your speaker(s) or subwoofer(s) equals 1 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound. The 5th channel on these particular amplifiers are usually dedicated for driving subwoofers.
6100 watts x 1 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
PDX (Precision Power)
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

10000 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
1/0 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
0.5 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Not Bridgeable
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
1%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
No
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-pass (LP)
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

35 - 250 Hz
Subsonic Filter
Allows you to block (filter) ultra-low frequencies that your subs cannot reproduce.
15 - 50 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
87 dB
Bass Boost
The objective of the bass boost is to get more kick out of your subwoofer. It is a circuit that emphasizes the lower frequencies at a given point. The bass boost should always be set first before setting the gain. This feature is known for destroying subwoofers and is commonly used incorrectly, so be cautious.
0 - 18 dB
Bass/Gain Remote
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Yes
Fan Cooled
A great feature to have if an amp generates a large amount of heat. Cooling fans can help regulate the temperature to prevent the amp from overheating (burning).
No
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
17%
4 Star
67%
3 Star
17%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
4.2
Value
4.8
Features
4.0
Design
4.2
Usability
4.7

Jim G

Dutch Harbor, AK

Overall
Durability
Value
Features
Design
Usability

very good amp

February 14, 2014

I have two of these bad boy's. one is powering 4 alpine 15" type R in a 06 dodge ram quad cab and it hitting 156.8 db. @ 30 hertz. you need a upgrade mechman alternator and at least 4 extra batteries. warning anything below 12 volts will kill this amp. do not buy this amp and run it an a factor alternator, it will die. Very good, durable, and easy to install. Use at least 1/0 cable for power.

0 of 0 found this helpful

Help our customers find the most helpful reviews

ERSH

pittsburgh,pa

Overall
Durability
Value
Features
Design
Usability

great price

August 4, 2013

Need lots of power to run this amp. Be careful, read up on this amp before you buy. I have this on 4 re-xxx 18's all it did was clip every time. I turned it up until I got the right power to it.(needs lots of power)

0 of 0 found this helpful

Help our customers find the most helpful reviews

Dark Horse

Canada

Overall
Durability
Value
Features
Design
Usability

PDX-10k

December 15, 2012

John From Dark Horse Car Audio. May I suggest Mechman or DC Power Alternators for the 16 to 18 volts you need to hit the 10,000 watts. There are many battery manufacturers that can also deliver the 16 volts needed to hit 10k. Even at lower voltages its a great amp. Will not hit the full 10k below 16 volts but still a great bargain for dollars to watts. Really stable and a bargain at this price. Done my homework. Would recommend it to anyone. Most amplifier manufacturers rate power at high voltages so be careful no matter what amplifier you buy.

0 of 0 found this helpful

Help our customers find the most helpful reviews

WildBill

Tulsa, Oklahoma

Overall
Durability
Value
Features
Design
Usability

great power for price

December 13, 2012

This amp will produce its rated power "IF".... and that is a very big if you can give it what it needs. It is rated for that output on 16 volts not 12 or 14.4 like most other amps on the market. And you MUST have it wired at .5 ohms that is 1/2 Ohms. Along with 1200 amps of power consumption. That puts any idea of using factory charging systems out the window. DO YOUR HOMEWORK boys and girls this amp is for the serious person not your everyday bass head. Great power for the price. Good luck not breaking your windows with this bad boy.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Dark Horse Car Audio

Canada

Overall
Durability
Value
Features
Design
Usability

Great Amplifier!

December 6, 2012

I own two of these amplifiers and own Dark Horse Car Audio. With good voltage it will hit 10,000 watts easily. That means alternators and several batteries. I have owned and run them in my car for years now without a single problem. I would recommend them to anyone looking for big power at a reasonable price. One of the few amps of this size that will work under 14 volts and not self destruct. I've pulled them down to eleven volts with car off and still no issues. Very solid amplifier.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ground Pounder

ETC

Overall
Durability
Value
Features
Design
Usability

Ppi amp

September 11, 2012

This thing will never hit 10,000 watts unless lightning hits it! Very powerful though, you can get around 6,000 good watts around 1ohm if you have the rite batteries,wiring and alternator. Dollar for dollar i like this amp a buddy has it. Has 12 alpine subs wired to it in a suburban. Personelly im a fosgate amp guy but this thing sounds great for how much power it can produce. Gona need alot of 0guage and beefy connectors, just a heads up.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX XKIT02 True 0-Gauge Wiring Kit

In case you didn't know, NVX has top notch wire for your new amp! Don't forget the RCA's!

Your Price $149.99

Stinger SK6201 0-Gauge Wiring Kit

You only get great sound when you use great wire. This Stinger kit will do the trick! Don't forget the RCA's!

Your Price $149.99

Belva BPK0D Dual Amp 0/4-Gauge Wiring Kit

Enough wire for 2 amps! Don't forget the RCA's!

Your Price $59.99

NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

Your Price $79.99

Kicker Big 3 Package 1/0 Gauge Big 3 Upgrade Kit

Get all you need including wire cutters to upgrade your power and ground wire.

Your Price $149.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $39.99

StreetWires FB0

1/0 Gauge Firewall Bushing

Your Price $6.95

Stinger Gauge Reducer (0/1 AWG to 4 AWG)

Chrome gauge reducer allows 0/1 AWG cable to fit in 4 AWG inputs

Your Price $7.99

NVX XDBU4 - Top of the Line!

Distribution Block with Two 1/0 or 4 AWG Inputs and Four 4 or 8 AWG Outputs

Your Price $17.99

Professional Installation for your Car Power Amplifier

Covers labor charges through our professional installer network.

Your Price $89.99

NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $11.99

NVX XIX25 X-Series RCA Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $26.99

NVX XWS1225 12 AWG Speaker Wire

25 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire

Your Price $39.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBSW167 16 AWG Speaker Wire

16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $12.99

SMD DD-1 Distortion Detector

Set the gain of an audio amplifier quickly and accurately

Your Price $149.99

Scosche SPL Meter SPL1000F

Handheld boomSTICK measures your SPL range from 60 to 135 dB

Your Price $21.99

AutoSound 2000 CD-102

High Frequency Test CD specifically designed for the set-up and evaluation of sound system imaging and placement.

Your Price $11.99

XIX2025 Strapping RCA

0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors

Your Price $12.99

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

PDX-10K

Weight

48.00lbs

Internal SKU

pdx10k

Internal Product ID

43839

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Precision Power PPI PDX-10K