Access exclusive offers, news and more.
Thanks for signing up.You'll be the first to receive updates about new collections, top brands, and exclusive products.
1000W, 2-Channel Mosfet Amplifier with Low and High Pass Filter Controls
• Max Power Output: 500 watts x 2 Channel @ 4 ohms
• Variable Bass Boost
• Soft Start Turn-On
• Gain Adjustment
•
• Max Power Output: 500 watts x 2 Channel @ 4 ohms
• Variable Bass Boost
• Soft Start Turn-On
• Gain Adjustment
•
Internal Product ID:
43987
5 star |
|
40% |
4 star |
|
40% |
3 star |
|
0% |
2 star |
|
0% |
1 star |
|
20% |
Durability |
|
3.6 |
Value |
|
4 |
Features |
|
3.4 |
Design |
|
3.4 |
Usability |
|
4.6 |
True amp that sucks
This amp straight sucks hands down the rms rating for it to be bridged at 4ohm@1000watts produce a sound of 250 watts i do not recommend this amp at all.
15
found this helpful.Does the job!
I have this hooked up to 2 MB Quart RLP304 12 inch subs and it hits really hard. It produces the type of bass that takes your breath away. I have only had one problem with it overheating and that is when I was testing to see how long it could go on full blast. Overall I am very happy with this product. It is small and easy to add to a custom system with limited space. The one thing I wish it had was a remote bass control. Other than that, I like it a lot.
10
found this helpful.Great Value!
Amp works good, doesnt over heat, but I don't blast my music or over extend the bass so... It was easy to set up, and I haven't had any problems w/ it.
9
found this helpful.great value
I've owned a few lanzar amps and I never had any trouble with them. I bought this lanzar as a highs amp and it's doing its job. it sounds great I even put it on my 3 kicker cvrs and I was surprised it put out good bass too.
8
found this helpful.great product
works great, great power for the money. would buy this product again. im running 1 sub and two 6x9s and is about 3/4 power. no problems
6
found this helpful.Controls bass level and frequency and monitor voltage
$29.99
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
$7.99
16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction
$12.99
Great for isolating a second batter making it dedicated to the stereo system
$14.99
Does not create a voltage drop to the second battery like conventional isolators
$65.99
Make installation a breeze with the XBTU
$16.99
No-fail termination and current flow, it helps keep your system protected and running smoothly
$13.99
Great for amplifiers that do not accept a large gauge power wire
$9.99
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
$1.99
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
$2.99
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
$9.99
Marine Grade Bluetooth Audio Controller/Receiver
$48.99
Best selling similar products
• 75 watts x 2 channel @ 4 ohms
• 100 watts x 2 channel @ 2 ohms
• Bridged: 200 watts x 1 channel @ 4 ohms
• Total RMS Power: 200 watts
• Class D 2 ohms Stable 2-Channel Amplifier
(4)
$199.99
• 250 watts x 2 channel @ 4 ohms
• 400 watts x 2 channel @ 2 ohms
• Bridged: 800 watts x 1 channel @ 4 ohms
• Total RMS Power: 800 watts
• Class D 2 ohms Stable 2-Channel-Channel Amplifier
$224.00
• 50 watts x 2 channel @ 4 ohms
• 100 watts x 2 channel @ 2 ohms
• Bridged: 200 watts x 1 channel @ 4 ohms
• Total RMS Power: 200 watts
• Class D 2 ohms Stable 2-Channel Amplifier
$199.99
• 65 Watts RMS x 2 @ 4 ohms
• 100 Watts RMS x 2 @ 2 ohms
• CEA-2006 Compliant
• Refined Heatsink with High Convection Capability
• Automatic Remote Turn-On/Off function
• Dimensions: 8.46" x 7.48" x 1.97"
$199.99
• RMS: 300 x 2 @ 4 ohms, 420W x 2 @ 2 ohms, Bridged 840W x 1 @ 4 ohm
• Total RMS Power: 840W
• CEA-2006 Compliant
• Efficient Full Range Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
(11)
$179.99
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire
4 Gauge Power Amplifier Installation Kit
4 Gauge Power Amplifier Installation Kit
Controls bass level and frequency and monitor voltage
Universal Remote Level Bass Control
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
L.O.C. PRO Series 2-Channel Line Output Converter with Remote Turn On
Add a 2-Channel amp without replacing your factory radio
80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver
Looking to fine tune the bass in your vehicle? Look no further
16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction
25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire
16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
1.0 Farad Capacitor with Digital Red Display for up to 1000W Max
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
Universal Bluetooth Audio Receiver
Marine Grade Bluetooth Audio Controller/Receiver
Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob