Expert Service 1-877-289-7664 [Hours]

Boom. SUBTEMBER is here!

Crossfire CFQ31M

31-Channel Graphic Mono EQ

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Fine Tuning

The CFQ31M is a mono equalizer designed with the audiophile in-mind. It was designed for maximum equalization per channel, thus creating a need for two CFQ31M's to operate in a stereo mode. Multiple units may be used for equalizing rear and center channels as well. If you're into seriously fine tuning your system, then this is the EQ for you.

General Features:

  • 31-Band Constant Q Graphic Mono Equalizer
  • PWM (Pulse Width Modulated) power supply
  • Gold-plated contacts for optimum signal transfer
  • Master volume control
  • Mono set of 8V preamp outputs
  • Mono gain adjustments
  • Differential inputs and outputs
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Product Specifications:

  • Number of Bands: 31
  • Input sensitivity: 6V
  • Signal-to-noise ratio: >110dB
  • Output level: 8V
  • Frequency response: 10 Hz, 40KHz
  • Range: +6dB or +12dB selectable
  • Accuracy: 3% of center frequency

Equalizer Specifications

Type of Equalizer
This determines the way the equalizer processes the signal from the source unit. A parametric equalizer allows to you adjust the center point of the frequency band you are adjusting as well the bandwidth which can be narrowed or widened. A graphic equalizer has fixed frequency bands and bandwidth and only the frequency bands can be adjusted. A digital equalizer uses a software program to tune your system.
A graphic equalizer typically has more adjustable bands and is less expensive, whereas a parametric will have fewer bands but offer a greater level of control and provide more tuning options. Digital equalizers will tune your system with the most detail and precision but require a computer and are typically a little higher in price.
Equalizer Bands
The number of graphic or parametric equalizer bands the receiver has. The better the EQ, the more likely you will be able to "tweak" your sounds to your desire.
Equalizer Frequencies
The frequency range that allows control of the center frequency of each equalization band.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Built-in Bass Reconstruction
Bass reconstructors, or bass enhancers, improve low frequency reproduction in a car audio system with at least one subwoofer. These bass expander products will help your subs produce accurate bass thumps.
Line Driver
A line driver is a small amplifier used to support the strength of the audio signal coming from the source unit.
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
Total Number of Inputs
This is the total number of input connections that go into the unit.
Total Number of Outputs
This is the total number of output connections that the unit will produce.
Display Color
The display color refers to the color of the text and or graphics on the receiver.

Multi-Color: When more than one color is on the display, for example one part of the text is white, while the other part is blue.

Variable-Color: The display colors can be changed by the user. If the default color of text/display is blue for example, the user can change the settings to where the color turns to red. Variable color displays are typically described in detail in the item's description.

TFT-LCD Display: In-dash receivers with a video screen that display multiple colors and often times video such as DVD, navigation or other video sources.

Button Color
Refers to the color of the physical buttons on the unit.
Signal Boost/Cut
The available signal boost or cut for each of the frequency bands.
Max Output Level
The maximum level (in volts) of signal output. A higher level will increase the clarity and boost your signal.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
Width
The width of the item from left to right (side-to-side) measured in inches.
Height
The height of the item, measured from top to bottom, in inches.
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

CFQ31M

Weight

6.00lbs

Internal SKU

cfq31m

Internal Product ID

44207

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Crossfire CFQ31M