Reverse Wire Harness to Connect an Aftermarket Stereo Receiver to Select 1987-2008 Toyota Vehicles
Product highlights
• Reverse Wiring Harness For Select 1987-2008 Toyota Vehicles
• Plugs Into Car Harness At Radio
• Power/4 Speaker
• One 10-pin Plug And One 6-Pin Plug
• Allows For Installation Of Aftermarket Radio Using Existing Factory Wiring
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Best selling similar products
Crux DKGM-49 Stereo Replacement Interface
• Stereo Replacement Interface with Dash Kit
• Fits select 2006-2020 vehicles from GMC, Chevrolet, Buick Vehicles
• Accommodates ISO Double DIN Mount
• Retain steering wheel controls and chime functions
(41)
$129.60
List price $201.60
• Direct connection to the factory radio harness
• Color coded wires for easy installation
• No cutting or splicing required
(97)
$5.99
List price $6.99
iDataLink Maestro RR Interface Module
• Universal stereo replacement interface module
• Connects to iDataLink-compatible stereos
• Retains SWC, voice commands, etc.
• Enhances multimedia experiences with exclusive gauges, vehicle info, parking assistance, climate control, and radar detection
(35)
$189.99
List price $229.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(51)
$12.99
List price $6.99
• Direct connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(12)
$152.99
List price $379.00
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(56)
$9.95
List price $6.99
iDataLink Maestro RR2 Interface Module
• Advance stereo replacement interface for select vehicles
• Offers exclusive infotainment retention
• Adds support for additional vehicles
• Enables Bluetooth programming directly from mobile device
• Retains OnStar, SYNC, Uconnect, and more
(5)
$259.99
List price $319.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(246)
$7.95
List price $8.99
• Direct Connection to the factory harness
• Color coded wires for easy installation
• No cutting or splicing required
(63)
$9.95
List price $6.99
• Provides 12-Volt accessory power (RAP)
• Designed for non-amplified and amplified models
• Retains balance and fade
• Pre-wired for steering wheel audio controls
(25)
$99.99
List price $299.00
Manufacturer:
Model Number:
TA02RB
Weight:
0.50lbs
Internal SKU:
ta02rb
Internal Product ID:
4568
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Amp install w/o cutting factory harness
I purchased both the Reverse Wire Harness and Standard harness.
For my project I wanted to retain my factory radio with BT and hands free calling, plus steering wheel controls.
I was able to create a harness where I ran low level outputs, remote turn on. Plus ran the high outputs direct to a amp, and then right back into the harness. Complete plug an play installation for a sub amp, and high pass amp.
Color coding made it a breeze to manage the creation of a custom harness. No factory wires were cut. Very pleased and would use this product again. I already purchased both again to use on my wife's car!
20 found this helpful
wiring connector
I used the male and female scosche connectors to install a power amp to my factory head unit but wanted to make sure none of the factory wiring was disturbed.worked like a charm after I discovered toyota power antenna leads go off when switvh functions such as to cd or aux,this caused amp I had installed to go off every time I tried to play a cd.I ended up running amp switch on power to a ignition on source instead and worked fine
21 found this helpful
Worked as expected.
I am building a receiver using mobile components, and since everything is hardwired for Toyota I need something to plug into that would be neat in appearance and easy to disconnect. This item met those requirements.
10 found this helpful
Scosche BOBAZT Stereo Connector Kit
• Designed to connect in-dash receiver wiring harness to vehicle wiring harness
(27)
$9.95
List price $9.95
JVC HA-EBX85-W (HAEBX85 White) Sport Clip Ear Buds
Sports In-Ear Clip Headphones
$17.99
List price $19.95
Monster Gratitude (MG GTR IE RGLD CT WW) Rose Gold In-Ear Headphones by Earth Wind & Fire
Gratitude In-Ear Headphones Designed and Tuned by Earth, Wind & Fire & Noel Lee
$59.95
List price $229.95
Plateau SL-THS-B (Clear Glass Top)
Black Satin Finish SL Series Accent Table with a Clear Glass Top
$399.99
List price $499.99
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
