Expert Service 1-877-289-7664 [Hours]

Boom. SUBTEMBER is here!

Mackie 1402-VLZ3

14-Channel Compact Recording/SR Mixer

We apologize

This item has been discontinued

Get FAST answers from customers ASK a Question See questions answers

Mackie 1402-VLZ3

The Mackie 1402-VLZ3 is only slightly larger than Mackie's 1202 model, yet delivers even more powerful features, ratcheting it into that next level of professionalism. Enjoy two additional mic/line channels, smooth faders instead of knobs, and an even stronger master section for your tone-sculpting delight. Six of Mackie's acclaimed XDR2 mic preamps are the heart of this mixer, delivering studio-grade sound wherever you take your 1402-VLZ3. On the road, on the stage, or in the studio, you'll always have incredibly powerful, professional sound with your Mackie 1402-VLZ3!

Product Features:

  • 4-channel ultra-low noise compact mixer with highest possible headroom
  • 6 studio-grade XDR2 Extended Dynamic Range mic preamps
  • Ultra-wide 60dB gain range
  • 130dB dynamic range
  • +22dBu line input handling
  • Extended low frequency response
  • Distortion under 0.0007% (20Hz - 20kHz)
  • Phantom power for studio condenser mics
  • 12 high-headroom line inputs
  • Advanced DC pulse transformer RF rejection
  • 2 Aux sends, level, pan and PFL solo on each channel
  • 2 stereo Aux returns + EFX to Monitor
  • 3-band Active EQ (80Hz, 2.5kHz, 12kHz)
  • 18dB/oct. 75Hz Lo-Cut filter on Mic input channels
  • ALT 3/4 stereo bus for added versatility
  • Control Room/Phones source matrix
  • Rack-mountable design using optional rack ears
  • Rugged steel chassis
  • Dimensions: 14"W x 12.9"D x 3.2"H
  • 1-year Manufacturer's Warranty

Mixer Features

Format
The type of circuitry the mixer is comprised of as either Analog or Digital.
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
Channels
The number of individual channels that can simultaneously pass audio.
Rachmountable
The ability to mount the mixer to a 19" rack.
Phantom Power
The +48V of DC power supplied to condenser microphones by all, none, or individual mic preamps on the mixer.
Width
The width of the item from left to right (side-to-side) measured in inches.
Height
The height of the item, measured from top to bottom, in inches.
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.

Connections

Main Outs
The main two channel audio output of the mixer
CRTL Room/ALT Outs
The control room or alternative outputs from the mixer.
Direct Outs
The number of direct outputs from individual channels on the mixer.
Headphone Outs
The number of headphone outputs the mixer supports.
Aux Sends
The number of auxiliary sends available on the mixer.
Inserts
The number of channel inserts found on the mixer. Channel inserts are TRS jacks found inline on the mixer channel strip used to insert signal processing into a mixer channel by transmitting a send and return on the tip and ring of a TRS - x2 TS insert cable.
Bus/Subgroup Outs
The number of bus or subgroup outputs the mixer supports.
Mic-Pre Inputs
The Number of mic level inputs the mixer can accept.
Line Inputs
The Number of line level inputs the mixer can accept.

Digital Features

Digital Recording Interface
The ability for a mixer to be used as a recording interface as well as the required connection.
Digital Signal Processing
On board Digital Signal Processing effects that can be assigned to auxs, busses, channels, or the main mix.
Digital Outs
The number of digital outputs the mixer supports.
Digital Inputs
The number of digital inputs the mixer supports.
Digital Audio Resolution
The sample rates and bit depths supported by the digital converters of the mixer.

Powered Features

Total Max Power
This is the combined max power output of all the amplifier's channels.
Continuous Power @ 8 ohm (Bridged)
This is the continuous (RMS) power output of the amplifier at a bridged 8 ohm impedance.
Continuous Power @ 4 ohm
This is the continuous (RMS) power output of the amplifier at an 4 ohm impedance.
Continuous Power @ 8 ohm
This is the continuous (RMS) power output of the amplifier at an 8 ohm impedance.

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0
Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

1402-VLZ3

Weight

13.00lbs

Internal SKU

1402vlz3

Internal Product ID

45994

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Mackie 1402-VLZ3