Garage
Shop

NVX VSW124

600W 12" VS-Series Dual 4 ohm Car Subwoofer

NVX
Shop all NVX
Product videos
highlight-star-icon

• RMS Power: 400-600W
• Hybrid Carbon And Fiberglass Woven Cone With A Pressed Paper Backing
• High Excursion 3-Layer Foam Surround
• Stamped Steel Basket
• Dual Nomex Spiders

Learn more about the vsw124

Good news and a little bad...

This item has been discontinued

But you may be interested in the newest model that's available.

vsw124v2 thumbnail

NVX VSW124 Version 2 (VSW124v2)

OUR PRICE: $94.99

View item

Product Highlights


• RMS Power: 400-600W
• Hybrid Carbon And Fiberglass Woven Cone With A Pressed Paper Backing
• High Excursion 3-Layer Foam Surround
• Stamped Steel Basket
• Dual Nomex Spiders

Description


NVX brand icon

Authorized dealer

Top Quality Bass at an Amazing Price

The NVX VSW124 is the perfect subwoofer solution. The series utilizes excellent engineering found in the higher end NVX subwoofers. It features a hybrid carbon and fiberglass woven cone with a pressed paper backing that is strong and lightweight for accurate response and extreme SPL. Keeping the cone under control is a high-roll 3-layer foam surround with silver stitching that is specially treated to give you maximum excursion. The VSW124 also uses a 2.5" high-temperature aluminum voice coil that provides maximum current distribution and has a power handling range of 400-600 watts RMS. All of these elements combined produce tight, deep and accurate bass that is sought after by bass-heads and audiophiles. If you are looking for an extremely well engineered subwoofer at an amazing price, then the NVX VSW124 is the perfect choice for you.


General Features:

  • 12" Dual 4-ohm VS-Series Car Subwoofer
  • Power Range:
    • RMS: 400-600 watts
  • Impedance: Dual 4 ohms
  • Non-pressed paper cone with woven carbon fiber top
  • High excursion 3-layer foam surround
  • Heavy duty custom textured steel basket for maximum rigidity
  • Dual Nomex Spiders
  • 2.5" High temperature aluminum voice coil
  • Double stacked Ferite magnet motor structure with protective rubber boot
  • Frequency response: 30-500 Hz
  • Resonance Frequency (Fs): 33.6
  • Top-mount depth: 5-15/16"
  • Sensitivity: 86.3dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Additional Information:

*CEA-2031 Compliant: All CEA-2031 compliant loudspeakers adopt the same testing and measurement methods so comparing them side by side is easy. Loudspeakers include car speakers and subwoofers. The Consumer Electronics Association created new testing and measurement methods for mobile loudspeaker systems that define test procedures for rating the performance and physical size of speakers. This is important because you can now compare different speakers on the same playing field. Any manufacturers who adopt the CEA-2031 logo product mark can be compared evenly to other speaker manufacturers with the same mark.

Product history:

NVX VSW124v2 thumbnail
(newest, current model)
NVX VSW124 thumbnail
(previous model, replaced by NVX VSW124 Version 2 (VSW124v2))

Subwoofer Wiring Guide


Wiring Guide to Wire 1 NVX VSW124 Subwoofer

Mono Amp

2 Channel Amp - Bridged

Wiring Guide to Wire 2 NVX VSW124 Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp - Bridged

Wiring Guide to Wire 3 NVX VSW124 Subwoofers

Mono Amp

4 Channel Amp

Wiring Guide to Wire 4 NVX VSW124 Subwoofers

Mono Amp

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Specifications & Details


Subwoofer Specifications
Series
VS Series
Subwoofer Size
12"
RMS Power Handling
600 watts
Voice Coil(s)
Dual
Impedance (Per Voice Coil)
4 ohms
Voice Coil Diameter
2.5"
Frequency Response
30 - 500 Hz
Sensitivity
86.3 dB
Xmax (millimeters)
12 mm
Subwoofer Design
Round / Circle
Main Cone Color
Black
Dark Gray
Woofer Composition
Non-Pressed Paper With Woven Carbon Fiber Top
Woofer Surround
High Roll Foam
Magnet Structure
Double Stacked
Subwoofer Grille
No
Re-Cone Kit Available
No
Recommended Enclosure Specifications
Recommended Enclosure Type
Ported / Vented
Sealed
Optimum Sealed Box Volume
1.5 cubic feet
Optimum Ported Box Volume
1.75 cubic feet
Top-Mount Depth (Mounting Depth)
5-15/16"
Cutout Diameter
9-27/32"
Shallow Mount Installation
No
Electromechanical Parameters
Free-Air Resonance (Fs)
33.6 Hz
Equivalent Compliance (Vas)
35.36 liters
Total Speaker Q Value (Qts)
0.533
Electrical Q Value (Qes)
0.604
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

NVX

Model Number:

VSW124

Weight:

18.00lbs

Internal SKU:

vsw124

Internal Product ID:

46321

Product and How-to Videos


  • NVX VS Series Car Subwoofers
  • Car Subwoofer Size Buying Guide | What Size of Sub Should I Get?

Customer Ratings & Reviews



5 star
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%



Durability
5
Value
5
Features
5
Design
4.8
Usability
5

Customer Reviews

Sort by:

Loading...

OH YEAH

Paired this up with my NVX MPVA1 and NVX XBBR with a lime adapter to my 2013 Scion tC release 8.0 series, I think my Moonroof is going to leake soon due to the vibration....#beastmode

By Corey on July 4, 2014

62

found this helpful.

These things HIT!

I bought two of these to replace an old Alpine that had blown and let me tell you, these are the hardest hitting subs Ive ever heard for the price. Got them wired up to a Hifonics brx1000 @ 1ohm and you can hear me coming from the next block. I would definitely recommend these to anyone who wants loud, clean, bass.

By Brannon on September 5, 2014

60

found this helpful.

pretty good sub

This is a great buy. Put it with the Belva 2000.1. Running it at 2ohms in a 1999 es300 Lexus. Just the right bass for that type of car. I would definitely recommend this sub. I was thinking about putting 3 of these in my Tahoe.

By MIKE D. on January 5, 2015

56

found this helpful.

SOLID

I have two of these bad boys on 1 Ohm on a Hifonics 1400.1D in a ported box. Gets pretty damn loud. Ran one of them on 900W at 2 Ohms for about a month and it took it like a champ.

By Brad on January 8, 2015

56

found this helpful.

You will not find a better sub for the price!

I had a JL 10w3 and was never really satisfied with the output, so I decided to upgrade to a 12. I looked around and didn't want to spend a ton of money, so after reading all the good reviews on these, I decided to take the chance. WOW am I glad I did! I have 1 of these running on 800 watts at 2 ohm load and it slams! It sounds better than a lot of dual 12 setups that I've heard. I built a ported box tuned at 32 HZ and it loves it! The overall size is 22Wx15Tx15D and a 26" long L port 1.5"wide. I almost went with the VCW, but I think it would have been too much for what I need. I'm just used to spending 200 or more on a sub. Not anymore!

By Kyred on July 29, 2014

53

found this helpful.

great subwoofer

i had mine wired 2ohm on a pioneer premier stage 4 1200 Watt RMS mono amp and i loved it !!! ive also have the nsw and vcw and the x series 12". they all are awesome for the price if your looking for the loudest get the vcw. if you want the best sounding get the x series. these are a mid level and are a great budget subwoofer for everyday use. the nsw is one of the best subs in its price range and are impressive for an "entry level" sub.

By Brad on August 20, 2013

54

found this helpful.

GOOD

THE NVX VSW124 IS A GREAT SUB I HAVE ONE IT HAS BEEN DROPED TO 2 OHMS AND IT IS IN A .95 PORTED BOX TUNED TO 63 HZ HOOKED TO A CEA COMPLIANT 400@2OHMS RMS AMP HAD IT RAN TO A 1000@2OHMS BUT WELL I HAD TO ORDER BIGGER WIRES FOR THAT AMP IT DID TAKE IT AND IF TUNED RIGHT CAN TAKE IT ALL DAY BUT ON THE 400 WATTS RMS IT HITS AND HITS HARD MY WIFE HATES IT AND ME AND MY KIDS LOVE IT...HAVE ORDERED A NEW BOX AND POWER WIRES SO THAT I CAN RUN THAT 1000 WATTS RMS TO IT WITHOUT HURTING MY CAR ONCE I HAVE DONE THAT WILL REVIEW AGAIN THIS REVIEW IS BASED ON 400 WATTS RMS AND WELL IT LOVES IT AND IT SEEMS TO BE HUNGRY FOR MORE

By Raymond on December 31, 2014

54

found this helpful.

Great sub!

This little sub has some power! Clean, tight bass, and it hits the lows great! Would definitely reccomend this sub to anyone looking to get the best bang for their buck!

By audiophiles anonymous on October 29, 2012

52

found this helpful.

Great Subwoofer !

I love this subwoofer, makes great massage and I only have one ! I reccomend going with two for optimal wow factor !

By nelson on October 11, 2013

50

found this helpful.

Awesome subs from NVX and at a great value

I used to be skeptical about this particular type of brand, cause i've never heard of them or had any friends who own this brand of sub; but after reading these reviews online. I decided to take a bet and let me tell u these subs POUND, everything is there SPL as well as sound quality these things can get crazy loud! i have a pair of them hooked up to a hifonics brutus 1200.1 in a sealed probox with about 1.5 cubic ft each. Furthermore these subs put my kicker cvr's 12 to shame and finally, yes i would recommend these subs as "mid-level" sub for value.

By Gerardo on October 2, 2014

50

found this helpful.

Add-ons


Similar Products

Best selling similar products

Kicker CWR122 (48CWR122)

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 2 ohms
• Polypropylene Cone
• Santoprene Rubber Surround
• Mount depth: 5-3/4"
• Sensitivity: 86.9 dB

(6)

$127.96

NVX VCW124 Version 3 (VCW124v3)

• RMS Power: 1200 Watts
• 3” 4-Layer High Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple stacked High Energy ferrite magnet
• Die Cast aluminum vented basket

(118)

$189.99

JL Audio 12W0v3-4

• RMS Power: 300 watts
• Impedance: Single 4 ohms
• Polypropylene Cone
• Foam Surround
• Mount depth: 5.40"
• Sensitivity: 85.64 dB

(40)

$159.99

Kicker Solo-Baric L7S122 (44L7S122)

• Peak Power: 1500 watts
• RMS Power: 750 watts
• Impedance: Dual 2 ohms
• Injection Molded Polypropylene - IMPP Cone
• Ribbed Santoprene Surround
• Mount depth: 6-11/16"
• Sensitivity: 88.6 dB

(3)

$262.96

Rockford Fosgate Punch P3D4-12

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohms
• Anodized Aluminum Cone
• Santoprene Rubber Surround
• Mount depth: 6.66"
• Sensitivity: 85 dB

(121)

$219.99

Related Searches


VSW124 small

Item added to your cart.

Price: $89.99

Essential add-ons
Single 10" Sealed Subwoofer Enclosure

Durable 3/4" Medium Density Fiberboard (MDF) Construction

$99.99

$79.99

Add to cart
Single 12" Sealed Subwoofer Enclosure

Durable 3/4" Medium Density Fiberboard (MDF) Construction

$109.99

$69.99

Add to cart
Dual 12" Sealed Subwoofer Enclosure

Durable 3/4" Medium Density Fiberboard (MDF) Construction

$119.99

$119.99

Add to cart
Single 12" Venteded MDF Subwoofer Enclosure

Durable 3/4" Medium Density Fiberboard (MDF) Construction

$109.99

$69.99

Add to cart
Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

$14.99

$6.99

Add to cart
NVX SDTK20

20 Square Feet of Sound Damping Material

$89.99

$59.99

Add to cart
Dynamat Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

$236.95

$149.95

Add to cart
NVX SDRLR1 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$9.99

$7.99

Add to cart
NVX SDRLR2 Sound Damping Rubber Roller

Universal Professional Heavy Duty Roller for Sound Damping

$11.24

$8.99

Add to cart
Belva BAMMD1

Six Function Digital Multimeter

$14.99

$6.99

Add to cart
Belva BAMMD3

Nine Function Digital Multimeter

$29.99

$9.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon