Expert Service 1-877-289-7664 [Hours]

NVX VCW104

750W 10" VC-Series Dual 4-ohm Car Subwoofer

In Stock
|

List price $219.99

$179.99

with warranty

You Save: $40.00 (18.18%)

Order within 16 hrs 22 mins to ship 7/14

Arrives by Thursday, July 17 to zip 07095

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Thu, July 17

Bundled Savings with this Product

=

50% Off an NVX Subwoofer with Purchase of Kicker Amplifier!

For a limited time only, receive 50% off the NVX VCW104 subwoofer with the purchase of a Kicker KX800.1 amplifier! This amp-sub combo will give you great bass at a great price!

90.00

69514

379

Kicker KX800.1 (40KX8001)

$429.95

+

50% OFF

NVX VCW104

$179.99

Special Price $89.99 ($179.99 if purchased separately)

NVX VCW104

(Offer 1 of 1)

Combined Total Price

$519.94

You Save $90.00

NVX Store

Incredible Bass with Ability to Perform in a Tight Space!

NVX's VC-Series car subwoofers are about to blow you away. The VCW124 is a jack-of-all-trades and has been engineered to the highest standards. The woven fiber pressed paper cone and custom High Roll foam surround with Nylon stitching help reproduce tight and accurate bass, keeping cone distortion to a minimum even at the highest volume levels. The next key components in the design of the VCW124 are the large dual 3" High Temperature Aluminum voice coils and triple stacked motor structure. With all of these features combined this sub can handle some serious power at 850-1000 watts RMS. The dual voice coils also give you many options for different Ohm load wiring configurations.

With all the above engineering elements combined, the VCW124 subwoofer gives you a better sound and build quality of many subs costing almost twice as much. They even sound amazing in small sealed enclosure for people with limited space!

General Features:

  • 10" Dual 4-ohm VC-Series Car Subwoofer
  • Power Handling:
    • RMS Power Range: 600-750 watts
  • Impedance: Dual 4 ohms
  • Pressed paper cone with woven fiber top
  • Custom High Roll Foam Surround with Nylon Stitching
  • Heavy Duty Die Cast aluminum basket for maximum rigidity
  • Dual Poly-Cotton Spiders
  • 2.5" High Temperature Aluminum Voice coil
  • 127oz. Triple stacked Ferite magnet motor structure with protective rubber boot
  • Frequency response: 20-220 Hz
  • Resonance Frequency (Fs): 31 Hz
  • Optimal sealed box volume: .65 cubic feet
  • Optimal ported box volume: 1.0 cubic feet
  • Top-mount depth: 6"
  • Sensitivity: 83dB
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Additional Information:

*CEA-2031 Compliant: All CEA-2031 compliant loudspeakers adopt the same testing and measurement methods so comparing them side by side is easy. Loudspeakers include car speakers and subwoofers. The Consumer Electronics Association created new testing and measurement methods for mobile loudspeaker systems that define test procedures for rating the performance and physical size of speakers. This is important because you can now compare different speakers on the same playing field. Any manufacturers who adopt the CEA-2031 logo product mark can be compared evenly to other speaker manufacturers with the same mark.

Subwoofer Specifications

Subwoofer Series
Each subwoofer manufactured is part of a series. This is the name of the subwoofer's series.
VC (NVX)
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
10"
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
750 watts
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Dual
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Voice Coil Diameter
Diameter of voice coil, usually measured in inches.
2.5"
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 220 Hz
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
83 dB
Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
20 mm
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Round / Circle
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Dark Gray
Woofer Composition
Lightweight woofer cone materials are essential for efficient operation. Poly cones produce exceptional sound and are sturdy against various changes in temperature. Paper cones are very efficient, and when treated for moisture resistance, will perform at a high level. Poly refers to polypropylene, which is thermoplastic or fibers that are polymers of propylene. IMPP refers to injection molded polypropylene, a commonly used process and material in speakers.
Woven Fiber Pressed Paper Cone
Woofer Surround
A speakers surround is part of the suspension system. The surround protects the cone and prevents it from being displaced as it flexes out from the basket. It is usually made of a durable material like treated foam or rubber in order to withstand the strenuous job of producing bass frequencies.
Foam
Magnet Structure
Defines the overall structure of the subwoofers magnet.
Triple Stacked
Subwoofer Grille
Most subwoofers are able to accommodate a universal grille; however, some subs include a grille and others have a specific, optional grille available for purchase separately. If "yes", then the subwoofer includes a grille. If "optional (sold separately)" the matching grille will need to be purchased in addition to the sub.
No
Re-Cone Kit Available
Some higher end subwoofers have replaceable cone assemblies. In case of a blown woofer, a recone kit allows for a simple replacement, as opposed to purchasing an entire new subwoofer.
No

Recommended Enclosure Specifications

Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Ported / Vented
Sealed
Optimum Sealed Box Volume
This value indicates the ideal sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
0.65 cubic feet
Optimum Ported Box Volume
This value indicates the ideal ported box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
1.0 cubic feet
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
6"
Cutout Diameter
The actual diameter of the hole you will need to cut out if you are creating a new mounting location for this speaker, or if you are mounting a subwoofer in a box.
9.61"
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.

No

Electromechanical Parameters

Free-Air Resonance (Fs)
The free-air resonance frequency of the subwoofer, measured in Hz. At this frequency the weight of the moving parts is perfectly balanced with the subwoofers suspension system.
31 Hz
Equivalent Compliance (Vas)
This is the amount of air that has the same stiffness as the subwoofers suspension. The greater the rating, the lower the stiffness and larger recommended enclosure. It is measured in Liters.
24.96 liters
Total Speaker Q Value (Qts)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including all dimensionless losses. Essentially, a high Qts value (closer to 1.0) means the subwoofer is great for sealed enclosures and a low Qts value (closer to 0) means the woofer is great in vented enclosures. A Qts of around 0.45 means the woofer will work decently in either enclosure type.
0.45
Electrical Q Value (Qes)
The subwoofers relative damping (Q) at the resonance frequency (Fs), including electrical losses. Also called the mechanical damping of the subwoofer. The unitless measurement usually varies from 0.5 10.
0.526
Electrical Resistance of Voice Coil (Re)
Amount of DC resistance of the subwoofer when measured with an ohm meter. Typically, this will read less than the impedance rating of the subwoofer.
6.4 ohms
Mechanical Q Value (Qms)
This is the subwoofers relative damping (Q) at the resonance frequency (Fs), including mechanical losses. Also called the mechanical damping of the subwoofer. This unitless measurement usually varies from 0.5 10.
2.981

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
4.9
Features
4.9
Design
5.0
Usability
5.0

Joseph

Milwaukee, WI

Overall
Durability
Value
Features
Design
Usability

JUST AS GOOD AS THE BIGGER BOYS

September 18, 2013

When it comes to sub I listen for deep, clean bass. These do the job. Sonic Electronix is awesome for recommending these for me. Thanks. Ppl ask where can they find this sub. I send them here

1 of 1 found this helpful

Help our customers find the most helpful reviews

Bryan

crown point, IN

Overall
Durability
Value
Features
Design
Usability

BIG sound front the small sub..

September 18, 2013

I had a JL 12W7 in a ported box and got tired of not having any trunk space. So I sold that off and got one 10" NVX dvc sub in the free sealed box (ported boxes were backordered)... I prefer to maximize the sound out of a sub with a ported box but, all I can say is WOW.. This little 10 in a sealed box thumps almost AS-GOOD as the 12w7 I had.. NVX uses a similar magnet frame setup as some other high end subs, which is typical of new brands. I am hooked, AND I have trunk space!! Kinda wish I had bought a second one.. Don't look any further, BUY ONE (or two) and you won't regret it. The ONLY drawback was the sub did not come with mounting screws, and the opening on the free sealed box had to be enlarged because the sub would not fit.. minor problems..no biggie.

1 of 1 found this helpful

Help our customers find the most helpful reviews

Rickey

Hurst,tx

Overall
Durability
Value
Features
Design
Usability

awesome new line!!!

May 4, 2014

After a 20 hour breakin of this product, I recommend it to anyone looking for solid bass while saving space. Nvx is now my #1 product. Thank u sonic electronix for this product.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Ben

Anaheim, CA

Overall
Durability
Value
Features
Design
Usability

Powerfull.

January 9, 2014

I have 1 of this 10" sub's in a ported box, & its loud...The bass is deep & clean. At first I was looking for a more popular brand (JL, Kicker, Pioneer...) but went for NVX brand & I love it. The design of this sub is great quality. It's heavy & beefy looking for a 10" sub.

0 of 0 found this helpful

Help our customers find the most helpful reviews

D ROC

ATLANTA GA

Overall
Durability
Value
Features
Design
Usability

AWSOME SUBS

March 22, 2013

ONLY 1 WORD DESCRIBES THIS SUB..... AWESOME!!! . I PURCHASED 2 AND PUT THEM IN A PRO BOX POWERED BY A HIFONICS BRUTUS MONO BLOCK AMP AND THEY PLAY LIKE HELL. I SAY TO ANYONE , THEY ARE WORTH EVERY PENNY AND THEN SOME. NVX IS THE $H@T.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Robert

currie, NC

Overall
Durability
Value
Features
Design
Usability

great sound

February 11, 2013

After talking to the sales rep I decided to purchase two vcw.tens.having never heard of nvx i was kinda skeptical.my expectations werent really That high Considering they were going into a box with .55 air space While also going under my rear seat in a crew cab.i can honestly say they far exceded my expectations.sound great and i havent even got them broken in yet.pushing them with jad1200.1 with gain on low.once broken in shop will set amp to where it needs to be.cant wait to drive them hard to c how theyll hold up.so far a great buy compared to the competition.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Rob

currie, NC

Overall
Durability
Value
Features
Design
Usability

nice sound

February 10, 2013

I was looking to purchase the jlw3's.after talking to the service/support group at sonic they recommended the nvx brand. I was sceptical because I hadn't heard of nvx before.I decided to take their advice.I'm running two vcw104 in a .55 cut ft box per speaker in a GMC 1500hd crew cab powered by a jad1200.1. My expectations weren't really to high with the small enclosure and it bn down fire under my rear seat. Just had everything installed several hours ago and they honestly far exceded my expectations.even with this being break in period subs sound great.cant waittill next saturday to go back And get amp set up tO really drive them.Great sounding speaker for the price,mounting depth is good.will fit in spaces other speakers in its class wont.seems to be made pretty good and sturdy.cons-dont really have any that i see of.as far as durabitity time will tell,if they dont hold up ill update.great sound for a pretty good price.i would recommend I'm running a pioneer 3400bvh deck with 4 focal door speakers Powered by the nvx jad800.4,two Vcw104 powered by the 1200.1 with nvx 1/0 gauge ampifier wiring kit.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Dennie E

Santa Clarita, CA

Overall
Durability
Value
Features
Design
Usability

Deep lows, outstanding SQL and a value that's unrivaled

January 18, 2013

The VC10 sub is designed to sound great and play loud with a price tag that beats its competition by a mile. I'm running this sub in a sealed .75cf box powered with a solid 800 watts continuous and I haven't been able to even get a hint of bottoming out. Even with its massive triple stacked BL motor the mounting depth is only 6" which will fit in just about every box. Thats not happening with a JL w6, a Hertz sx10 or a focal k2?sub. But the power handling of the VCW beats them all despite its compact size resulting in very deep lows. And it's dual spiders give it extremely good damping for fast response, outstanding sound quality and accurate reproduction. You can be assured that the specs are accurate in real world use. Before you buy do yourself a favor and compare the well known competition and you'll see that the VCW is a clear winner in price per performance. Doing your homework will only make you feel better when you hook this equipment up in your system. I couldn't be happier with my purchase and I'm willing to bet you'll feel the same way.

0 of 0 found this helpful

Help our customers find the most helpful reviews

Accessory Tools and Products

Accessories added

NVX 25 ft. of True Spec 12 Gauge Speaker Wire

100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.

Your Price $39.99

25 ft. of Streetwires 12 Gauge Speaker Cable

You'll need speaker wire to hook up that new subwoofer!

Your Price $44.95

Belva 23 ft. of 12 Gauge Speaker Wire

Ultra-flexible PVC blended jacket for easy installation.

Your Price $14.99

Single 10" Subwoofer Angled Truck or Hatchback Box Enclosure

CARB Compliant, 5/8" MDF Shallow Sub Enclosure Lined with Polyfil.

Your Price $34.99

Single 10" Sealed MDF Subwoofer Enclosure

10-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil.

Your Price $34.99

Single 10" Ported Enclosure Custom Black Baffle

Durable 3/4" Medium Density Fiberboard (MDF) construction.

Your Price $54.99

20 Square Feet of Sound Dampening Material

NVX Sound dampening is thicker than competitors, eliminates rattles and gives you bigger bass!

Your Price $59.99

Dynamat Sound Dampening Trunk Kit

Did you know sound dampening will reduce those annoying rattles and even increase your SPL?

Your Price $109.95

Stinger Sound Dampening Trunk Kit

Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!

Your Price $69.99

12 oz. Can of Adhesive Spray

Spray adhesive used for adhering carpet to subwoofer boxes without bubbles.

Your Price $6.99

Spring Post Terminal Cup

Makes adding a spring post terminal to an enclosure simple! Banana clip ready!

Your Price $3.99

40" x 15 Ft Piece of Premium Un-Backed Automotive Trim Carpet

Durable design for long life-span, available in many colors and shades.

Your Price $39.99

Gold Plated Dual Terminal Banana Plug Connector

Enables an expandable, secure connection accepting up to 8 gauge wire.

Your Price $3.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Xscorpion 9-Piece Nylon Plastic Pry and Chisel Tool Set

Easily removes dash/trims, door clips, panels and pins, rubber grommets and vehicle emblems.

Your Price $14.99

Cordless Multi-Functional Heat Tool Soldering Iron Kit

Continuous working lock allows you to work without holding down trigger.

Your Price $79.99

2" Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

Universal rubber roller to make it easy to install sound dampening.

Your Price $7.99

1mm All Purpose Solder

Solder is all purpose for use on most projects where solder is needed.

Your Price $8.99

Universal 10" Subwoofer Grille

Keep your subwoofer safe from accidental damages with this amazing grill.

Your Price $13.99

10" Protective Waffle Subwoofer Grille

Keep your subwoofer looking amazing while keeping it safe.

Your Price $4.99

Scosche SPL Meter

Monitor the noise level of your new car audio system with this SPL meter measuring from 60-135 dB.

Your Price $21.99

AutoSound 2000 CD-101

Low frequency test CD

Your Price $11.99

Impedance Meter / Signal Generator

Easy to locate tuning frequencies of passive radiators and ported enclosures

Your Price $299.99

1 NVX VCW104 Subwoofer

Mono Amp

2 Channel Amp - Bridged

2 NVX VCW104 Subwoofers

Mono Amp

Mono Amp - Option 1

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp - Bridged

3 NVX VCW104 Subwoofers

Mono Amp

4 Channel Amp

4 NVX VCW104 Subwoofers

Mono Amp

2 Channel Amp

2 Channel Amp - Bridged

4 Channel Amp

Product Summary

Manufacturer

Model Number

VCW104

UPC

818060011351

Weight

19.00lbs

Internal SKU

vcw104

Internal Product ID

46592

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: NVX VCW104

  • NVX VCW12 Bass Demo
  • NVX VC Series Car Subwoofers
  • Three 15" NVX VCW Subwoofers Flexing Sunroof!
  • Subwoofer Size Buying Guide