Expert Service 1-877-289-7664 [Hours]

NuForce Icon uDAC-2 Special Edition Red

96kHz Sample Rate and 24-Bit Desktop DAC with Asynchronous Audio

List price $249.00

$199.00

with warranty

You Save: $50.00 (20.08%)

Order within 4 hrs 46 mins to ship 7/14

Arrives by Wednesday, July 16 to zip 20147

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Wed, July 16

Bundled Savings with this Product

=

FREE Pair of NuForce Earbuds with DAC!

For a limited time only, get a FREE pair of awesome earbuds with a purchase of a NuForce DAC!

19.95

46763

737

NuForce Icon uDAC-2 Special Edition Red

$199.00

+

100% OFF

NuForce NE600X-LIME

$19.95

Special Price $0 ($19.95 if purchased separately)

NuForce NE600X-LIME

• In-Ear Headphones
• OFC Wire Flat Cable
• Harmonic Tonality
• 11mm Drivers
• Frequency Response: 20-20000 Hz

(Offer 1 of 1)

Combined Total Price

$199.00

You Save $19.95

Product Features:

  • Desktop USB DAC with Asynchronous USB Audio
  • Designed for asynchronous USB Audio model
  • High-performance 24-bit resolution and 96kHz sample rate for immaculate reproduction
  • TOCOS volume control for precise channel tracking
  • Headphone amp circuitry powers headphones with impedance ratings from 16 to 300 Ohms, producing 80mW x 2 channels at 16 Ohms
  • Includes analog RCA, digital coaxial, and 3.5mm outps for a variety of applications
  • Double jitter-reduction mechanism at data level and oversampling filter stages for the best sound quality
  • 2v output
  • No capacitors in any of the signal paths to reduce and prevent signal tarnish
  • Also available in Silver, Red, Black, and Violet

Technical Specifications:

  • Input: USB Digital (1.1 and 2.0 compatible)
  • Sampling Rate: 96 kHz
  • Resolution: 24-bits
  • Analog RCA Output: 2Vrms
  • Dynamic Range: 90 dB
  • SNR: 98 dB
  • THD: 0.05%
  • Digital Output: coaxial RCA 75-ohms
  • 3.5mm Output Power: 80mW x 2 @ 16-Ohm
  • Frequency Response: 20-20000 Hz
  • USB Bus Powered, 80 mA/5V
  • Maximum Power Consumption: 500mW
  • Dimensions: 2-11/16"W x 1-1/2"D x 53/64"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Headphone Amplifier Specifications

Amplifier Style
Some headphone amplifiers are designed to be portable and others are meant to be placed on a desk. This will tell you what style of amplifier this item is.
Desktop
Digital-to-Analog Converter (DAC)
A Digital-to-Analog converter (also known as a DAC) converts a digital audio signal into an analog signal. This is especially helpful for listen to music from digital sources, such as iPods and smart phones.
Built-in
Frequency Response
The range of frequencies the amplifier will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 20000 Hz
THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.05%
Input Connection
This is the manner in which the headphone amplifiers receive an input audio signal.
USB
Output Connection
This is the manner in which the headphone amplifier will output the audio signal.
3.5mm Mini-Jack
Number of Outputs
Some headphone amplifiers have a built-in splitter so multiple pairs of headphones can be connected to it. The number specified here is the number of headphones that can be connected to the amplifier.
3
Output Power
This is the output wattage of the headphone amplifier. It is measured in mW.
80 mW
Power Requirement
This is the required way to give the unit power. Common power sources are 120V AC (Common house plugs), batteries, or a combination of the two. If the headphone amplifier uses batteries, this will list the type of batteries that are required. Please refer to the description to find out how many are required for the unit to be properly powered.
USB
Width
The width of the item from left to right (side-to-side) measured in inches.
2-11/16"
Height
The height of the item, measured from top to bottom, in inches.
1-1/2"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
53/64"

DAC Specifications

THD (Total Harmonic Distortion)
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.05%
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
20 - 20000 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
98 dB
Digital Inputs
The type of digital inputs the digital-to-analog converter features.
USB Type-A
Line Level Outputs
The type of analog line level outputs the DAC features.
3.5mm Headphone Jack
Sample Rate
24-bit at 96 kHz
Power Requirement
This is the required way to give the unit power. Common power sources are 120V AC (Common house plugs), batteries, or a combination of the two. If the headphone amplifier uses batteries, this will list the type of batteries that are required. Please refer to the description to find out how many are required for the unit to be properly powered.
USB

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0

Product Summary

Manufacturer

Model Number

ICON-UDAC2SE-RED

UPC

816924010175

Weight

0.46lbs

Internal SKU

iconudac2se-red

Internal Product ID

46763

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: NuForce Icon uDAC-2 Special Edition Red