• 12" Single 2 Ohm Competition (Comp) Series Subwoofer
• Power Handling:
  • Peak: 300 watts
  • RMS: 150 watts
• Impedance: Single 2 ohm
• Injection molded SoloKon cone
• Optimized Polyfoam Ribbed Surround
• Extremely rigid cone, along with 360 degree back bracing eliminates distortion
• Double stitched surround for enhanced durability
• Tinsel leads woven into the spider with Kicker's Spiralead technology
• Single high-temperature voice coil
• 45oz. Magnet structure
• Frequency response: 27-500 Hz
• Sensitivity: 88.3 dB
• Mounting depth: 5-7/8"
• Also found as: 10C12-2 ohm, C12-2, Comp 122, Comp 12" 2 ohm, 2010 C124
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

• 2-Channel Class AB ATX Series Car Amplifier
• MAXX Power Rating:
  • 4 ohms: 400 watts x 2 chan.
  • 2 ohms: 800 watts x 2 chan.
  • Bridged, 4 ohms: 1600 watts x 1 chan.
• Pulse Width Modulated MOSFET power supply
• LED power green and protect red indicators
• Bass Boost (0-12 dB @ 45 Hz)
• Soft Start Turn-on
• 2 or Mono channel operation
• Speaker-level (high-level) inputs with signal sensing for automatic turn-on
• Preamp RCA outputs to daisy chain multiple amps
• 4-Way System Protection circuitry (DC, thermal, overload, and speaker short protection)
• Flat panel heatsink design for extreme heat dissipation
• Nickel-Plated RCA level inputs
• Nickel-Plated screw terminals
• Variable High-Pass Filter (60-1200 Hz)
• Variable Low-Pass Filter (30-250 Hz)
• Subsonic Filter (60-1200 Hz)
• Signal-to-Noise Ratio: >95 dB
• Damping Factor: >200
• THD (Total Harmonic Distortion): <0.05%
• Channel Separation: >70 dB
• Variable Input Level Control: 0.2V-5V
• Fuse Rating: 2 x 20 Amp
• Frequency Response: 30-45,000 Hz
• Dimensions: 12-5/8"L x 9-3/4"W x 2-3/16"H
• 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

General Features:

• Complete 4 Gauge 2-Channel Amplifier Installation Kit
• Designed specifically for car audio systems up to 1000 watts RMS
• Premium Powerflex power and ground wire provides optimal power transfer
• Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
• Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
• In-line Mini-ANL Fuse holder with a 80 amp Mini-ANL fuse offers ideal protection for high powered systems
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. (5.2 meters) Red 4 gauge power wire
2. 3 ft. (.91 meters) Black 4 gauge ground wire
3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
5. 20 ft. (6.1 meters) Speaker cable
6. One In-line Mini-ANL Fuse Holder with a 80 amp Mini-ANL fuse
7. One Black rubber firewall grommet
8. One 4 Gauge red chrome plated ring terminals
9. One 4 Gauge black chrome plated ring terminal
10. Three 18 Gauge red Spade terminal
11. Two 18 Gauge black Spade terminal
12. One 18 Gauge red butt connector
13. Ten 4" Black zip ties