Expert Service 1-877-289-7664 [Hours]

Technical Pro WASP400

400W 6.5" Active Battery Powered PA System w/ Wireless VHF Mic, USB/SD Inputs & Much More!

Out of Stock - Backorder
|

List price $199.99

$89.99

with warranty

You Save: $110.00 (55.00%)

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

Product Features:

  • 400W 6.5" Active Battery Powered PA System
  • 1" Compression driver
  • USB flash drive & SD Card inputs accept drives up to a maximum of 8GB and will playback MP3 files
  • Play/Pause, Previous & Next Track buttons for USB flash drive and SD Card inputs
  • One VHF wireless microphone with 50 foot range included
  • ¼" microphone input
  • Individual volume controls for wireless and wired microphones
  • Microphone echo control
  • Bass & Treble Controls
  • Compatible with AC & DC (12V) Car Power
  • Microphone Inputs & Controls
  • Rechargeable Battery with Low Battery, Charging & Full Battery LED indicator
  • Perforated steel grill
  • Integrated top carry handle
  • Built-in rechargeable battery fully charges in approximately 8 hours
    For maximum battery life the battery should be fully charged prior to its initial use
  • Also found as: WASP 400, WASP-400
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Specifications:

  • Woofer: 6.5" woofer, 1" voice coil
  • Inputs: USB flash drive, SD Card, ⅛" AUX, RCA
  • Impedance: 4 ohms
  • Sensitivity: 93 ±2dB (1W@1M)
  • Frequency response: 40Hz - 20KHz
  • Dimensions: 10" H x 7" W x 11-1/2" D
  • Weight: 13 lbs
  • 110V or 12V

General Features

Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

400 watts
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
1 - Mono
DVD Audio
The unit will playback audio files burned onto a DVD disc.
Yes
MPEG-1 (VCD)
The unit will play Video Compact Discs (VCD). VCD are videos that are stored on regular compact discs (CD) and use a MPEG-1 compression.
No
CD
The unit will play CDs, also known as Compact Discs. This is the standard format for audio optical discs.
Yes
CD+G
Also known as CD+Graphics and often used for karaoke machines to present on-screen lyrics for the song on the disc.
No
MP3 Playback
This feature refers to whether or not the CD player will play discs encoded with MP3 files. To burn a MP3 encoded disc, use the "data" mode on your CD Recorder and finalize the session and/or CD.
Yes
Memory Card Reader
Whether or not the receiver has a built-in input for removable memory cards such as SD (Secure Digital) cards or MMC (Multimedia) cards.
SD Card
Microphone Included
Some units that require a microphone come with one, while others do not. This designates whether the item includes a microphone.
Yes
Number of Microphones
Some Bluetooth headsets will use multiple microphones to more efficiently capture the users voice.
1
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
40 - 20000 Hz
Height
The height of the item, measured from top to bottom, in inches.
10"
Width
The width of the item from left to right (side-to-side) measured in inches.
7"
Depth
The front-to-rear depth of the item, in inches. If the item is angled or slanted, this value is the bottom measurement.
11-1/2"

Speaker Features

Speaker Size
Refers to the size of the speaker measured in inches. Every vehicle has standard application sizes. Please use our vehicle fitment guide for your vehicle's specific speaker sizes if you do not know them.
6-1/2"
Peak Power Handling (Subwoofer)
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
400 watts
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
4 ohms
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
93 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
40 - 20000 Hz
Speaker Grilles
A grating or screen of metal or plastic bars or wires, mounted in front of a speaker as protection. If yes, the speakers will include matching speaker grilles. If no, there are no grilles included.
Yes

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0

Product Summary

Manufacturer

Model Number

WASP400

UPC

859789007065

Weight

13.50lbs

Internal SKU

wasp400

Internal Product ID

48440

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: Technical Pro WASP400