Dynamat Xtreme 20' Trunk KitDynamat Xtreme is a patented, lightweight elastomeric butyl and aluminum constrained-layer vibrational damper. The Xtreme Series adapts and conforms easily to sheet metal and other hard metals vehicles are made of. This material works best for temperature ranges between 14° – 140° but can withstand ranges between -65° - 300°.
Xtreme Applications
The Xtreme Trunk Kit is great for improving the overall sound quality in your vehicle by cutting out unwanted road noise. It is typically used on vehicles to reduce vibrations and rattles in the trunk. This kit comes in five 18" x 32" sheets combining for a total of 20 square feet which should be plenty for any size trunk your vehicle may have.
Easy to Install
Use scissors, a knife or a die to cut the Xtreme to the desired size and shape before removing the release liner. Next, remove dust, grease, moisture, and other foreign matter from the application surface. Now it’s time to peel off the release liner and start applying. The easiest way to apply is to bend the mat slightly and attach it along its shortest edge. Using a roller, press the mat tightly into place, the roller will help eliminate unwanted air pockets. There is no need for heating the material, for best results the application surface should not be below room temperature.
Product Features
- Dynamat Xtreme Trunk Kit
- Five 18" x 32" sheets (20 Square Feet Total)
- For the trunk floor, side panels, and trunk lid
- Add SPL to your vehicle
- Improves bass quality
- Reduces bass distortion
- Reduces trunk panel vibrations and road noise which helps to clarify the overall tone of your subwoofer
- Easy self-adhesive application
|
Average Customer Rating is 4.9 out of 5 stars:
Share your thoughts with others:
|
|
Average Attributes Rating:
| Durability |
|
4.8 |
| Value |
|
4.6 |
| Features |
|
4.7 |
| Design |
|
4.6 |
| Usability |
|
4.5 |
|
what's this?
|
|
|
Most Helpful Customer Reviews:
|
Review by
andrew from des plaines, IL
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
Does exactly what its supposed to do. F***** is a cheap ripoff that provides no sound dampining and falls off in cold weather. S****** R******* works just fine but material is folded which being stacked causes it to stick together and will take you 30 min to peel backing off.
1 sheet of Dynamat is rolled, not folded. Made installation a breeze but the wooden application roller is a must have!
|
|
Review by
big kevy from folsom, ca
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
It is well worth it. From a small system all the way up to the whole trunk filled with subs. I have 2 15"s and it works great. Of course its not going to take care of all the rattle with that much power but it sure does help. I would recommend getting the tools with it or use something similar that you may have laying around the house. It gets tricky if you dont when you get into corners and awkward spots. It was a little small for my trunk in a 2007 mustang so another pack would have been helpful but I most def recommend it.
|
|
Review by
Jose from Brownsville, TX
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
My trunk sounded like I had kidnapped Bruce Lee now with this Dynamat it sounds like I got Chuck Norris in there. It still rattles but not as much it went down about 60% might order another one to finish the job.
|
|
Review by
THUMPER from Ooltewah, Tn
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I bought 3 of these kits to do my truck. I still need 2 more kits. Easy to apply but, make sure you clean the areas where your applying or it will not work as good. Found out Mr. Clean and then rubbing alcohol works best. This stuff will cut ya so have a first aid kit handy. My cab is pretty solid and has a thud sound now. The back cab and floor still needs deading. I still have the 1/2" dynaliner to apply on top. My gas mileage has almost doubled since adding dynamat. Make sure to check out www.dynamat.com to get an idea. I covered pretty much every hole with strips and then layed my whole sheets. You'll see when you see the SPL section on doors. Mine is just as good without the dynaplate. Dynamat support said it would be like having the dynaplates installed. Course I'm building a compitition system for Iasca. I still need total of about $700.00 more dynamat, dynaliner, and another door kit. My doors outer skin, roof, king cab area took me about 8 hrs with small breaks, cleaning, applying and putting back together.
|
|
Review by
Ryan from Toronto, ON, Canada
| Overall |
|
| Durability |
|
| Value |
|
| Features |
|
| Design |
|
| Usability |
|
|
I used this Dynamat in the trunk of my '97 Honda Prelude (small trunk) and I was able to cover the entire inside, including the trunk lid and still had one sheet left. The result has been incredible. The bass is warmer and louder, and there is absolutely no rattle. Not only that, you can barely hear the bass outside the car when the music is cranked. I'm running 1000 watts RMS to a single 12" ported box.
|
