Garage
Shop

MB Quart ONX1.1600D

1600W RMS ONYX Series Class D Monoblock Amplifier (ONX-1.1600D)

MB Quart
Shop all MB Quart
Product videos
highlight-star-icon

ONYX Series Monoblock Class D Car Amplifier • 1600W x 1 Chan @ 1 Ohm • 1100W x 1 Chan @ 2 Ohm • Dual Speaker Terminals • Preamp RCA Outputs • 4-Way System Protection Circuitry • Piano Black Gloss Finish

Learn more about the onx11600d

We apologize

This item has been discontinued

Product Highlights


ONYX Series Monoblock Class D Car Amplifier • 1600W x 1 Chan @ 1 Ohm • 1100W x 1 Chan @ 2 Ohm • Dual Speaker Terminals • Preamp RCA Outputs • 4-Way System Protection Circuitry • Piano Black Gloss Finish

Description


MB Quart brand icon

Authorized dealer

Success is a Measurement of Quality and Power

The success of any car audio amplifier depends on system quality and construction, ease of installation and configuration, and sound enhancing features. MB Quart engineers built the all new Onyx series amplifiers from the ground up to be an affordable amplifier with the audiophile and performance enthusiast in mind. This series is composed of value-packed class-D and A/B class amplifiers that boast affordability without sacrifice to power or quality. All Onyx Amplifiers come clothed in a beautiful new age piano black finish which accents interiors and brings a whole new level of sophistication to swallow. To match, the line of Onyx Speakers shows off the same piano black finish applied to their polypropylene cone woofers. It’s a perfect match every time.

Speaking of features, Onyx amplifiers bring the full tuning spectrum to your fingertips with variable high-pass, low-pass and subsonic filters built-in. To increase endurance, MB Quart designed Onyx amplifiers with military grade printed circuit boards and built-in system diagnostics that keep these amps running strong. High speed MOSFET output devices are used in the power supply to give you the best watts-per-dollar ratio. It’s not hard to see how success has been written all over these amplifiers, though with a piano finish that looks that good, we know you will be staring.

  • ONYX Series Monoblock Class D Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 550 watts x 1 chan.
    • 2 ohms: 1100 watts x 1 chan.
    • 1 ohm: 1600 watts x 1 chan.
  • CEA-2006 compliant amplifier
  • PWM (Pulse Width Modulated) MOSFET power supply
  • MB QR-2 Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +10 dB bass boost at 45 Hz
  • Mono channel operation
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Preamp RCA outputs to daisy chain multiple amps
  • 4-Way System Protection circuitry (DC, thermal, overload, and speaker short protection)
  • Piano black gloss finish with illuminated logo
  • Heavy duty aluminum alloy convection heatsink for superb heat dissipation
  • Silver-plated RCA level inputs
  • Silver-plated screw terminals
  • Input sensitivity:
    • Low level: 200mV-6V
  • Variable low-pass filter (30-250 Hz, 24 dB/octave)
  • Subsonic filter (24 dB at 15-35 Hz)
  • Damping factor: >200
  • Frequency response: 15-250 Hz
  • Dimensions: 14-7/8"L x 9"W x 2-1/2"H
  • 2-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Product history:

MB Quart ONX1.1600D thumbnail
(newest, current model)
MB Quart ONX1.1500D thumbnail
(previous model, replaced by MB Quart ONX1.1600D)
MB Quart DSC-1500.1D thumbnail
(previous model, replaced by MB Quart ONX1.1500D)

Specifications & Details


Power Specifications - Subwoofer Channel
RMS Power @ 4 ohms
550 watts x 1 channel
RMS Power @ 2 ohms
1100 watts x 1 channel
RMS Power @ 1 ohm
1600 watts x 1 channel
Amplifier Specifications
Amplifier Class
D
Number of Channels
1 - Mono
Total RMS Power Output
1600 watts
Maximum Input Gauge Size
2 AWG
Minimum Impedance Unbridged
1 ohms
Minimum Impedance Bridged
Not Bridgeable
THD at Rated RMS Power
0.10%
Speaker Level Inputs
No
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
Low-Pass Crossover Frequency
30 - 250 Hz
Subsonic Filter
15 - 35 Hz
Signal-to-Noise Ratio
>95 dB
Bass Boost
0 - 10 dB
Remote bass/level controller
Yes
Fuse Rating
70A x 2 
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

ONX1.1600D

Weight:

11.00lbs

Internal SKU:

onx11600d

Internal Product ID:

52884

Product and How-to Videos


Customer Ratings & Reviews



5 star
50%
4 star
50%
3 star
0%
2 star
0%
1 star
0%



Durability
4.8
Value
5
Features
4.3
Design
4.8
Usability
4.8

Customer Reviews

Sort by:

Loading...

This amp is a BEAST

Alright let me get down to it. I just got the new alpine swr-12d4 12" sub with a new enclosure. They mounted the amp perfectly and man this thing for its price and its whistles blows other amps out the water. Yeah its a maxxsonics product but German engineered. Lets call it the euro hifonics lol. I got it hooked up to 1100 watts to my sub and I'm careful to not blast it that high but its a typeR and it takes it like a BOSS.

By Deez on December 2, 2012

22

found this helpful.

Good Amp

I bought this amp and have been very happy with it. I was using it at first just to drive a cheap Sony sub from Wal-mart. It made that 12'' hit harder than i knew a wal-mart Sony could but it was not enough bass for me then tried 2 12'' Sony's a lot better but still not enough but not the amps fault. Finally I bought 1 Digital Designs 9512 sc and finally I almost have the bass I was looking for. Next I think I'll buy Maxx Link and another MB 1.1600 for my DD sub because with just one MB 1.1600 I am barely over the minimum recommended rms watts. This amp put out the power and looks very nice! The only thing I wish this amp had is the ability to strap.

By Joe N on February 24, 2013

15

found this helpful.

Awesome sounding amp.Rivals my $1500 Rockford!

I'm running it at 1 ohm requiring 800 rms. Of course its way to much power but that's what I want in order to not have to use bass boost. Very clean power. Bought a Boss- weak amp so I sold it, bought a Hifonics-power was there but not clean so sold it as well. This one I think I'll be hanging on to for a while. For the price you can't go wrong in my opinion and I've seen a lot in 30 years of car audio. I'm happy I don't have to pay $1500 to get great sound anymore. I have a small problem with recessed adjustment knobs as you always need a tool but I guess that's the way most amps are these days.Not a big deal.

By Darren on January 20, 2013

13

found this helpful.

Good value for the money

Never had any experience with MB Quart products. Bought to power two Sundown Audio SA 8 v2. Wired to 1 ohm. Not too bad. I have not clamped the amp to check power rating but so far it seems to pushes the subs hard. AMP never gets hot. Doesn't even get warm. Just wish they came up with a better power and ground solution. One, on an angle. Straight would have been nicer. Two, 2 gauge in/out? Go try to find 2 gauge wire... Specs are good. Has a slight hum but not noticable unless you put your ear up to the subwoofer. Only had for a few months so lets see how durable it really is. Remember, it is rated for 14.4v so do the math to reach max RMS limit of your speakers.

By South Shore on December 16, 2012

11

found this helpful.

Add-ons


Similar Products

Best selling similar products

Alpine MRV-M500

• 300 watts x 1 channel @ 4 ohms
• 500 watts x 1 channel @ 2 ohms
• Total RMS Power: 500 watts
• Class D 2 ohms Stable Monoblock Amplifier

(38)

$164.95

NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

(28)

$214.99

JL Audio JD1000/1

• 600 watts x 1 channel @ 4 ohms
• 1000 watts x 1 channel @ 2 ohms
• Total RMS Power: 1000 watts
• Class D 2 ohms Stable Monoblock Amplifier

(2)

$399.99

Kicker CXA1800.1 (46CXA18001T)

• 900 watts x 1 channel @ 4 ohms
• 1800 watts x 1 channel @ 2 ohms
• 1800 watts x 1 channel @ 1 ohm
• Total RMS Power: 1800 watts
• Class D 1 ohms Stable Monoblock Amplifier

(10)

$399.96

Crunch GP-3500.1D

• 875 watts x 1 channel @ 4 ohms
• 1750 watts x 1 channel @ 2 ohms
• 3500 watts x 1 channel @ 1 ohm
• Total RMS Power: 3500 watts
• Class D 1 ohms Stable Monoblock Amplifier

(6)

$99.99

Related Searches


ONX1.1600D small

Item added to your cart.

Price: $169.99

Essential add-ons
Belva BAK02 1/0 Gauge Amp Wiring Kit

The perfect kit for your perfect amp!

$69.99

$44.99

Add to cart
Belva BAK02BL

1/0 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 2000 Watts - BLUE

$69.99

$44.99

Add to cart
Stinger SSK0

1/0 Gauge Amplifier Wiring Kit with 2-Channel RCA's

$93.00

$39.95

Add to cart
NVX XLCA2X

2-Channel Line Out Converter

$159.99

$79.99

Add to cart
NVX XLCA2

2 Channel Line Out Converter with xBOOST

$62.49

$49.99

Add to cart
NVX XBBR2

Looking to fine tune the bass in your vehicle? Look no further

$149.99

$69.99

Add to cart
The Epicenter - Black

Maximize Your Bass Potential with an Audio Control’s legendary Bass Restoration Processor

$149.00

$149.00

Add to cart
NVX XIV25 V-Series 2-Channel RCA Cable

16.4 ft of V-Series 2-Channel RCA Audio Premium Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$18.99

$12.99

Add to cart
12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

$14.99

$6.99

Add to cart
NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit

Comes with everything you need to upgrade your power and ground wire.

$114.99

$99.99

Add to cart
SHURiKEN SK-BT100

12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts

$349.99

$329.99

Add to cart
80 Amp Smart Relay Isolator (XSBI80)

Smart isolator - Monitors and auto-charging feature!

$49.99

$24.99

Add to cart
80 Amp Relay Isolator (BIR80)

Great for isolating a second batter making it dedicated to the stereo system

$19.99

$14.99

Add to cart
200 Amp Smart Relay Isolator (XSBI200)

Smart isolator - Monitors and auto-charging feature!

$79.99

$54.99

Add to cart
500 Amp Smart Relay Isolator (XSBI500)

Smart isolator - Monitors and auto-charging feature!

$99.99

$74.99

Add to cart
500 Amp Relay Isolator (BIR500)

Does not create a voltage drop to the second battery like conventional isolators

$89.99

$65.99

Add to cart
Belva BB2D

2.0 Farad Capacitor with Digital Red Display

$89.99

$39.95

Add to cart
Belva Nine Function Digital Multimeter

Perfect for any installation and troubleshooting

$29.99

$9.99

Add to cart
Six Function Digital Multimeter

Perfect for every toolbox

$14.99

$6.99

Add to cart
Steve Meade Designs IM-SG

Impedance Meter / Signal Generator

$461.99

$451.99

Add to cart
SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

$207.99

$199.99

Add to cart
SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

$195.99

$192.99

Add to cart
High Quality Element Resistant AGU Fuse Holder

Belva BAGUH2 AGU Fuse Holder

$9.99

$4.99

Add to cart
Modular Linkable ANL Fuse Block

Modular Linkable ANL Fuse Block

$59.99

$16.99

Add to cart
4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

$8.99

$3.99

Add to cart
4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

$8.99

$3.99

Add to cart
2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

$7.99

$3.99

Add to cart
2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

$7.99

$3.99

Add to cart
2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

$7.99

$3.99

Add to cart
Save up to 10 different vehicles in your garage

Loading...
Identify your vehicle and submodel details
  • Owner’s manual
  • Vehicle’s insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver’s side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon