Expert Service 1-877-289-7664 [Hours]

JBL GTO19T

3/4" GTO Series Car Tweeters with Passive Crossover Network

List price $129.95

$89.95

with warranty

You Save: $40.00 (30.78%)

Arrives by Friday, Sept. 5 to zip 20147

Add an Extended Warranty

Fast, Free Shipping

Within the US 48

60-Day Money-Back

Hassle Free Returns

Low Price Guarantee

Seen it for less? Click here

365-Day Coverage

Warranty assistance for a year

In Stock

Arrives by Fri, Sept. 5

Get FAST answers from customers ASK a Question See questions answers


 

General Features:

  • 3/4" GTO Series Car Tweeters
  • Power Handling:
    • Peak: 270 watts per pair / 135 watts each
    • RMS: 90 watts per pair / 45 watts each
    • Recommended Power: 5 - 75 watts RMS each
  • Edge-driven, Fabric Soft Dome tweeter construction
  • 3 ohms impedance
  • High-temperature voice coil
  • Three-ohm voice coils allow compensation for added resistance by thin factory speaker wiring
  • Surface or Flush mountable with included I-Mount hardware
  • Dedicated 12dB/octave high-pass crossover filters
  • Sensitivity: 93dB
  • Frequency response: 2,500-21,000 Hz
  • Top-mount depth: 13/16"
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Priced Per Pair

Product History:

JBL GTO19T thumbnail
(newest, current model)
JBL GTO18T thumbnail
(previous model, replaced by JBL GTO19T)
JBL GTO17T thumbnail
(previous model, replaced by JBL GTO18T)

Tweeter Specifications

Tweeter Size
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
1"
Tweeter Design
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
Dome
Tweeter Composition
Materials such as polypropylene, silk, cloth, and paper are the most common, where as many more recent tweeters are now manufactured with composites such as Aluminum, Titanium, Mylar, and other materials.

PEI is an acronym for "Polyetherimide" which is an amorphous, amber transparent, high-performance thermoplastic.

Cloth
Flush Mount
If the speaker or tweeter is flush mountable, then it can be installed flush to the mounting surface.

When installing a flush mount tweeter, make sure that there is enough room behind the mounting surface for the tweeter and magnet. Check the mounting depth with your specific vehicle.

Yes
Surface Mount
If the speaker or tweeter is surface mountable, then it can be installed to be raised above the mounting area.

When installing a surface mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

Yes
Angled Mount
If the speaker or tweeter is able to be angle mounted, then the installed tweeter can be positioned at an angle. An angle mounted tweeter can improve the audible sound quality of your system.

When installing a angle mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

No
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
135 watts
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
45 watts
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
93 dB
Frequency Response
The range of frequencies the speaker will reproduce (lowest frequency to the highest). Bigger is better, meaning the wider the range, the better. The optimal range is 20 - 20,000 Hz (which is the range of human hearing).
2500 - 21000 Hz
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

2500 - 21000 Hz
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
3 ohms
Top-Mount Depth
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
13/16"
Cutout Dimensions
Refers to the dimensions of the hole, measured in inches or millimeters, required to contain the speaker.
1-5/8" x 1-5/8" 

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0

Accessory Tools and Products

Accessories added

50 ft. of 16 Gauge Monster XLN Series Speaker Cable

Upgrade to clean and clear sound with Monster Cable's Xtra Low Noise (XLN) construction.

Your Price $29.95

Dynamat 10007 Rubber Roller

Install your Dynamat with ease! This heavy duty rubber roller is designed specifically to install your Dynamat!

Your Price $18.95

Universal Window Handle Remover

Remove your manual windows and door panels with this simple and convenient tool.

Your Price $9.99

Door Panel & Upholstery Remover Tool

Easily remove your door panels and other panels to make the installation of your new tweeters easy.

Your Price $5.99

Universal Wire Puller & Grabber

Running wires has never been easier! This wire puller allows you to run wires through those hard to reach places!

Your Price $6.99

Car Stereo and Speaker Installation Tool Kit

Includes Test Light, Crimp/Splice Tool, Multi-bit Screwdriver and more.

Your Price $12.99

Items we think you might want

REF-075tx thumbnail

Infinity REF-075tx

• 135W Max
• 45W RMS
• Textile Dome Tweeter
• 3 ohms Impedance
• Passive In-Line Crossovers
• High-Temperature Voice Coil
• Surface and Flush Mountable

Your Price $109.95

TR050-CT thumbnail

JL Audio TR050-CT

• 125W Max
• 50W RMS
• Textile dome diaphragm
• Neodymium magnet
• Ferrofluid cooled and damped
• 6 dB/octave inline filter included
• 8 ohms impedance
• Flush or surface mounting

Your Price $89.95

Hide answersShow all answers | Sort by
No questions have been asked about this item. Be the first!

Product Summary

Manufacturer

Model Number

GTO19T

UPC

050036313766

Weight

0.95lbs

Internal SKU

gto19t

Internal Product ID

53976

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: JBL GTO19T