Expert Service 1-877-289-7664 [Hours]

Expert advice for 14 years

(2) Kicker 10CVR124 + MB Quart FX1.1000 Bass Package

Two Kicker 12" CVR Subwoofers + MB Quart 1000 Watt Amplifier w/ 4 Gauge Amp Kit

We apologize

This item has been discontinued

Kicker 40CWR124 (CWR124)

800W 12" CompR Series Dual 4 ohm Subwoofer
Quantity: 2

General Features

  • 12" Dual 4 Ohm CompR (CWR) Subwoofer
  • Power Handling:
    • Peak: 1600 watts
    • RMS: 800 watts
  • Impedance: Dual 4 Ohm
  • Push-button wire terminals featuring impedance-selector provide installation flexibility
  • Injection molded polypropylene cone
  • Ribbed, tough Santoprene surround
  • Large-diameter, progressive-roll spider with high-strength Spiralead tinsel leads
  • One-piece UniPlate with vented pole piece and bumped back plate
  • Added voice-coil clearance for full excursion
  • High-temperature voice coil wire to allow subwoofer to handle high power without overheating
  • Quad venting included vertical and horizontal slots under the cone for ultimate cooling
  • Full-coverage steel basket with minimized mounting depth
  • Frequency response: 25-500 Hz
  • Sensitivity: 86.9 dB
  • Mounting depth: 5-3/4"
  • Replaces the best-selling Kicker CVR (CompVR) series
  • Item is a part of Kicker ProFit Group
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
Also Found As: 40-CWR124, 40CWR12-4, CWR12-4, CWR124, 40 CWR124, 40CWR124, CWR12, Comp R 124, Comp R124, CompR 124, CompR12, Comp-R124, CompR12-4 2011 Kicker Authorized Online Dealer and eBay Seller

MB Quart FX1.1000

1000W RMS 1-Channel Monoblock Formula Series Amplifier
Quantity: 1

MB Quart FX1.100 Features:
  • Formula Series Monoblock Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 250 watts x 1 chan.
    • 2 ohms: 500 watts x 1 chan.
    • 1 ohm: 1000 watts x 1 chan.
  • PWM (Pulse Width Modulated) MOSFET power supply
  • MB QR-2 Wired remote bass level control included
  • LED power (green) and protect (red) indicators
  • Variable Bass Boost (0 to +9 dB bass boost at 45 Hz
  • Mono channel operation
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Preamp RCA outputs to daisy chain multiple amps
  • 4-Way System Protection circuitry (DC, thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy convection heatsink for superb heat dissipation
  • Silver-plated RCA level inputs
  • Silver-plated screw terminals
  • Input sensitivity:
    • Low level: 200mV-6V
  • Signal to noise ratio: 95dB
  • Channel separation: 85dB
  • Variable low-pass filter: 40-300 Hz
  • Subsonic filter: 10-40 Hz
  • Damping factor: >200
  • Frequency response: 10-300 Hz
  • Dimensions: 19-4/10"L x 9-1/2"W x 2-1/4"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Belva BAK42

Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)
Quantity: 1

General Features:

  • Complete 4 Gauge 2-Channel Amplifier Installation Kit
  • Designed specifically for car audio systems up to 1000 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • In-line Mini-ANL Fuse holder with a 80 amp Mini-ANL fuse offers ideal protection for high powered systems
  • Also available as 4-Channel Kit
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Red 4 gauge power wire
  2. 3 ft. (.91 meters) Black 4 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. 20 ft. (6.1 meters) Speaker cable
  6. One In-line Mini-ANL Fuse Holder with a 80 amp Mini-ANL fuse
  7. One Black rubber firewall grommet
  8. One 4 Gauge red chrome plated ring terminals
  9. One 4 Gauge black chrome plated ring terminal
  10. Three 18 Gauge red Spade terminal
  11. Two 18 Gauge black Spade terminal
  12. One 18 Gauge red butt connector
  13. Ten 4" Black zip ties

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
0.0
Value
0.0
Features
0.0
Design
0.0
Usability
0.0

Product Summary

Manufacturer

Model Number

2-10CVR124_FX1.1000

Weight

46.00lbs

Internal SKU

2-10cvr124_fx11000

Internal Product ID

54062

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: (2) Kicker 10CVR124 + MB Quart FX1.1000 Bass Package

  • Subwoofer Size Buying Guide
  • How to Install a Car Amplifier